I need some help OC Q9300 with Rampage Extreme

[xXhighpowerXx]

I try to clock my CPU at 500FSB but it won't boot. I was able to boot at 450 i run prime95 for 1hr stable. I really need some help here. I want to overclock it to 500FSB so that my memory can run at it full speed (DDR3 2000).

Here is my spec:
Q9300 M1
Asus Rampage Extreme Bios: 1202
G-Skill 2x2GB DDR3 2000 part# F3-16000CL9-2GBTD
PSU: Antec 850 watt
Chilled Water Cooling TEC

And here is my current bios setting at 450FSB:







Please help me

[zsamz_]

your gtls are all wrong
try
60
40
40
40
ennable loadline calibration

[xXhighpowerXx]

your gtls are all wrong
try
60
40
40
40
ennable loadline calibration

How you calculate it? I'm new to GTLVref and those setting i have above is 450FSB i want it to be at 500 so that my memory can run at 2000 . Please help me.

[zsamz_]

How you calculate it? I'm new to GTLVref and those setting i have above is 450FSB i want it to be at 500 so that my memory can run at 2000 . Please help me.

i was able to get my q9650 to 500fsb and i gotta say was alot of work and voltages were way too high for my liking
you want 500bfs put in the work and even then gl to ya you better off with a udrp
take what you can get or get a gigabut p45 board
and runnin a quad + 2x2 ram is extremely hard on the board

[xXhighpowerXx]

i was able to get my q9650 to 500fsb and i gotta say was alot of work and voltages were way too high for my liking
you want 500bfs put in the work and even then gl to ya you better off with a udrp
take what you can get or get a gigabut p45 board
and runnin a quad + 2x2 ram is extremely hard on the board

lol gigabut. i think i stuck with this board saving money for the I7 980x.
Can you teach me how to calculate the GTL + some tips for overcloking?

[CryptiK]

I'd be pretty surprised if you could get a Q9300 stable at anywhere near 500 FSB on any board. I've never seen one clock well. Also you have a very low chance of getting a quad stable at 500 FSB and 2 x 2GB ram at anywhere near DDR3-2000 MHz on an X48.

[zsamz_]

lol gigabut. i think i stuck with this board saving money for the I7 980x.
Can you teach me how to calculate the GTL + some tips for overcloking?

nope its a waste of time
go read the thread a bit has lots of info if you want to learn somthing

[l0ud_sil3nc3]

I'd be pretty surprised if you could get a Q9300 stable at anywhere near 500 FSB on any board. I've never seen one clock well. Also you have a very low chance of getting a quad stable at 500 FSB and 2 x 2GB ram at anywhere near DDR3-2000 MHz on an X48.

ohhh it hurts but its the truth, ddr3 at high speeds and x48 hell even p45 is very stressful on the nb.

[PatRaceTin]

VTT may be 1.3xxxx

[lkiller123]

nope its a waste of time
go read the thread a bit has lots of info if you want to learn somthing

Would you mind telling him the specific thread that will suit his needs?

[zsamz_]

Would you mind telling him the specific thread that will suit his needs?

only 1 thread for rampage extreme
he should try the search button

you had the time to post that so you search the thread

[systemviper]

here's a good start, but 500 on that chip is tough,..
whats the vid of the chip?

here is what i am reading now, i am playing with the REX

How to set up GTL Ref Values for 45nm & 65nm
http://www.xtremesystems.org/forums/...d.php?t=202292



Live MB OC Report :: ASUS Rampage Extreme
http://www.xtremesystems.org/forums/...highlight=live