cpuz validation report > sdumper built this 2 stage cascade for me . I fired it up 20 min ago . I went for short cpuz validations runs for starters . Going to shut it down and check for how well my contact was to chip . In the next few days I will be benching and posting my results here & pic's . Hope you enjoy .
Last edited by pcnazz; 08-08-2010 at 10:36 AM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
Nice result.
great clock
AMD FX-8350@5 GHz 1.52V + H100 Corsair, Crosshair V Formula-Z, 2x 4GB GSKill TridentX 2400 MHz+ 10-12-12-25, EAH HD6870 DirectCU, Corsair TX850W
CPUs:next 2x AMD FX-8350, AMD FX-8320, AMD FX-6300, AMD FX-4300, AMD FX-8150, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, AMD FX 8120 95W, AMD FX 8120 125W, next AMD FX-8150, AMD A10-6800K, 2x AMD A10-5800, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, 2x Intel i7-3770K, Intel i7-3930KAMD Cinebench R10 challenge
awesome, cant wait to see more
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
how cold do they get
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
try less volts nazz. These chips range from 1.7 to 1.775 for valids.......higher actually hurts.
heatware chew*
For every beginning there must be an end
Will be around to help with AMD specific hardware till shortly after BD launches, after that I'm Ghost
Thanks brothers ! / holding -113c through validations crazydiamond / this set up chew* Likes 1.80v so far for validationsOriginally Posted by crazydiamond
Last edited by pcnazz; 08-08-2010 at 05:35 PM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
Nice, wish I had one.How much is the draw at the wall socket for the 2 stage? Looking forward to your results.
Probably ranging from a lot to A LOTNice, wish I had one.
@ pcnazz - Try 1.7 to 1.775v like the chew master suggests...he was running ~1.725-1.80v@ BlackOps on LHe if I recall.
Last edited by BeepBeep2; 08-08-2010 at 07:14 PM.
i imagine hes tested it
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
fixed it.
chew know's AMD processors inside and out and inside out from what ive seen
It might be he's just not cold enough for it to matter, on ln2 however higher voltage = higher (warmer) temps, and we all know colder temps = higher scaling.
Last edited by chew*; 08-09-2010 at 01:03 AM.
heatware chew*
For every beginning there must be an end
Will be around to help with AMD specific hardware till shortly after BD launches, after that I'm Ghost
awesome cascade there pc
Tuned it more then you will find the highest mhz @ lowest vcore
Go for 6G
Last edited by Dumo; 08-08-2010 at 11:38 PM.
Chew Right 1.8Vcore Little High
Nice Work You Can Do 6Ghz
Asus Crosshair IV Formula
Athlon X2 240 (For Now)
ATI HD5750 Silent
Kingston 2000HyperX CL9
GP1035B
Zalman CNPS 10X Extreme
Sorry For My Great English
Super Pi 1M 12 .140s
Last edited by pcnazz; 08-19-2010 at 01:53 PM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
Super Pi 32m 12m .38.621s
Last edited by pcnazz; 08-19-2010 at 01:53 PM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
Beautiful clocks man!
One of these days I'm gonna have to play with COLD....
Looks like it even helps with Mem clocking.
AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case
First Computer: Commodore Vic 20 (circa 1981).
Very nice Super Pi runs pcnazz.
BTW when I asked about the cascade's power draw the question was about amps or watts at the wall socket? I didn't know if it needed to be on a seperate circuit breaker?
Thanks brothers ! Yup I knew what you meant oldtimer your all set np , sdumper can give you rough #'s I'm sure . Here's a look at my mount area .
Last edited by pcnazz; 08-13-2010 at 07:32 AM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
I ran wprime 32m just now and had as low as 25.7sec with a different set . I'll hit this one one more time today but here is what I have so far logged .
Last edited by pcnazz; 08-14-2010 at 05:31 AM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
What are the temps on load? Scott makes good units.
Heatware
Asus RIIIE X58, 2x Asus REX X48, Evga Classified P55, Gigabyte EP45T-UD3LR, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965, i5 670, E8600, Q9650, Q9550, Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J, 3x2GB Mushkin Redline 2000C8, Crucial Ballistix 2x1GB DDR2-8500, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600, Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Why are you only testing on one core?I ran wprime 32m just now and had as low as 25.7sec with a different set . I'll hit this one one more time today but here is what I have so far logged .
I used asus turbov with 6 cores on the run . Not familiar much with wprime , why do you say 1 core ? I opened wprime 32m and clicked it . Hm explain please so i can run it again .
Last edited by pcnazz; 08-14-2010 at 08:56 AM.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
In the lower left of the wPrime window click advanced settings, change the #1 to the #6 then click save. Run the test 32M or 1024M.
Yup , I went there and was coming back to post that I found that . Thank you very much . I will run it in a few minutes , just a bench I never got involved with oldtimer but again thanks for showing me the core count !In the lower left of the wPrime window click advanced settings, change the #1 to the #6 then click save. Run the test 32M or 1024M.
Room Temp H20 | sdumper 2 Stage Cascade ( 4-Sale Mint ! ) | i7 975 ES / R2E rev12 v1504 | PH II X6 1090T BE / CH4 v905 | Dominator 2000GT CL8 6gb | Asus GTX 580 X2 SLI | Corsair HX1000 1210w | WD VR Raid 3+0 ( 450gb )
Posting Permissions
Reply With Quote
