Wow! How did u hit 980 mhz? What mod/vcore?
Wow! How did u hit 980 mhz? What mod/vcore?
GIGABYTE Z97X Gaming 3
Intel i7-4790K Devil's Canyon @ 4.5ghz
NXZT 340S
Corsair H110i & Corsair Link
2x8GB Corsair Dominator Platinum DDR3-2133
ASUS Strix GTX1080Ti OC
Storage:
Corsair AX1200i PSU
- 2xSamsung 850 Pro 250GB SSD
- Samsung 860 Pro 250GB SSD
- Samsung 970 Evo M.2 250GB SSD
- WD Caviar SATAII 1TB 32 mb cache
- Seagate SATAII 320GB 16mb cache
- Samsung 2.5" SATAII 320GB 8mb cache
- HGST(PS4) 2.5" SATAII 500GB 8mb cache
- Maxtor SATAI 120GB 8mb cache
Windows 10 Pro 64bit
ASUS ROG Swift PG279Q
How did u get 1.187V? Did you mod the bios?if so can you explain how?
GIGABYTE Z97X Gaming 3
Intel i7-4790K Devil's Canyon @ 4.5ghz
NXZT 340S
Corsair H110i & Corsair Link
2x8GB Corsair Dominator Platinum DDR3-2133
ASUS Strix GTX1080Ti OC
Storage:
Corsair AX1200i PSU
- 2xSamsung 850 Pro 250GB SSD
- Samsung 860 Pro 250GB SSD
- Samsung 970 Evo M.2 250GB SSD
- WD Caviar SATAII 1TB 32 mb cache
- Seagate SATAII 320GB 16mb cache
- Samsung 2.5" SATAII 320GB 8mb cache
- HGST(PS4) 2.5" SATAII 500GB 8mb cache
- Maxtor SATAI 120GB 8mb cache
Windows 10 Pro 64bit
ASUS ROG Swift PG279Q
This one?
Its the same length as the ATI 5770, I managed to install them without having to remove my side fan. The first thing I noticed after installing them was 'damn, were my 5770s really that loud?'. These MSIs are super silent as are all my case fans, the only thing that makes a slight amount of noise now is my CPU cooler.
Last edited by Mungri; 08-18-2010 at 05:49 AM.
Damn those cables look like a rats nest
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Aye, not much I can do about it. I have too many fans and the top backplate hole on my case is too far away, and the middle one is now covered up by my EATX motherboard .
I just about managed to install the motherboard with the 24 pin cable going through the side hole first.
Hmmm, I installed everything from the CD first - Drivers and afterburner software, and the voltage tweak in afterburner was grayed out.
So I then uninstalled Afterburner and installed the latest version from MSI's website, 1.6.1 which says - 'Added NVIDIA GeForce GTX 460 series and MSI N460GTX Cyclone series graphics cards support (including voltag control!)', but the voltage setting is still grayed out
Emailing MSI.
Just use nVidia Inspector, problem solved
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Man from Atlantis(B3D, DH, S|A, 3DC, OCN), MfA(G3D, CH), kaktus1907(XS,TPU,AT) and zennino
SIS 6326 > Ti 4200 > 9800XT > 9800GT > GTX 460
Celeron 366 > Celeron 1700 > Athlon XP 2500+ > E6300 > Q9650
Alice Madness Returns | Assassin's Creed: Brotherhood | Assassin's Creed: Revelations | Batman Arkham City | Battlefield 3 | Bulletstorm | Call of Duty: Modern Warfare 3 | Crysis 2 | Darkness II | Darksiders | Dead Island | Dead Space | Dead Space 2 | Deus Ex: Human Revolution | Dragon Age Origins | Dragon Age 2 | F.3.A.R. | F1 2011 | Half Life 2 | Hard Reset | Kane & Lynch 2 | L.A. Noire | LEGO: Pirates of the Caribbean | LEGO: Star Wars III: The Clone Wars | LOTR: War in the North | Mass Effect | Mass Effect 2 | Mass Effect 3 | Mini Ninjas | NFS Hot Pursuit | RAGE | Renegade Ops | Skyrim | The Witcher 2 | Tomb Raider: Underworld | Transformers: WFC | Trine 2
Last edited by Mungri; 08-18-2010 at 09:19 AM.
That GPU clock is just mental
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
[*]Brand: Asus ENGTX460 Direct CU
[*]Stock GPU: 675MHz
[*]OC GPU: 950MHz
[*]Stock vRAM speed: 3.8GHz
[*]OC vRAM speed: Not tested yet but fine @ 4.2GHz
[*]Stock GPU Voltage: 0.975v
[*]OC GPU Voltage: 1.087v
[*]Mods: No mods
Furmark @ 1920x1080 32xMSAA 30mins+ 60c LOAD.
I'll grab some screenshots tomorrow evening for ya.
Last edited by kup; 08-18-2010 at 04:16 PM.
Every GPU is different. Clock differences can be explained by manufacturing tweaks, some IHS being better applied than on other cards, people using more voltage, better cooling, etc.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
What voltage was used for 970 core? I have 950 core stable @ 1.125v with no artifacts, but I'm having trouble going any further.
i5 2500K, 40gb SSD/500gb HD, 650w Corsair TX, Asus P8P67 Pro, EVGA 460 gtx 1gb SC EE, 4gb ddr3 1600, Win 7 64bit
How can I use more than 1.087v without bios tweaking?
You can't. If you ask Nvspec he will probably give you a modded bios.
i5 2500K, 40gb SSD/500gb HD, 650w Corsair TX, Asus P8P67 Pro, EVGA 460 gtx 1gb SC EE, 4gb ddr3 1600, Win 7 64bit
My Asus 460 i GHz can do 912 but that is all untill i do bios mod for votage
At 900 now . I think i might stay with this setting
Update had to go to 1087 on voltage
Last edited by MrBeer; 08-19-2010 at 04:58 PM.
Hey guys well i just shoved 1 card in for now, im on air cooling with them. I just did a minor OC on the card, im at 875 mhz Voltage is 1.08 , i tried 900mhz but i get artifacts and i cant overvolt past 1.087. Hmmm anyways is this a decent score for minor OC on air with 1 card?
HEATWARE
x58-UD5 ▀▄ i7 950 4.0Ghz ▀▄ ZOTAC GTX 580 ▀▄ Mushkins 1600Mhz
GIGABYTE Z97X Gaming 3
Intel i7-4790K Devil's Canyon @ 4.5ghz
NXZT 340S
Corsair H110i & Corsair Link
2x8GB Corsair Dominator Platinum DDR3-2133
ASUS Strix GTX1080Ti OC
Storage:
Corsair AX1200i PSU
- 2xSamsung 850 Pro 250GB SSD
- Samsung 860 Pro 250GB SSD
- Samsung 970 Evo M.2 250GB SSD
- WD Caviar SATAII 1TB 32 mb cache
- Seagate SATAII 320GB 16mb cache
- Samsung 2.5" SATAII 320GB 8mb cache
- HGST(PS4) 2.5" SATAII 500GB 8mb cache
- Maxtor SATAI 120GB 8mb cache
Windows 10 Pro 64bit
ASUS ROG Swift PG279Q
Mmmm... your all making it so tempting for me to take a knife to my GPU and remove that IHS..
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
LOL Ket i never removed the IHS or anything, just threw the single card in and called it a day , hey i tried that inspector and MSI but it wont let me over volt more then 1.087.. Do i gotta flash the BIOS?
LowriDer - Hey thanks man, ya i gotta wait for my stupid SLI bridge to come in since i accidently threw out the one that came with the MB lol..Placed the order with evga yesterday, ill have the bridge either sat or monday then ill post up SLI scores for sure!
Last edited by Aedubber; 08-20-2010 at 06:39 AM.
HEATWARE
x58-UD5 ▀▄ i7 950 4.0Ghz ▀▄ ZOTAC GTX 580 ▀▄ Mushkins 1600Mhz
Yep you have to flash a modded BIOS to get more than 1.087v.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Bookmarks