Max Vtt used was +275mV ( default Vtt should be 1.13V AFAIK, so +275mV = 1.405V )
Max Vtt used was +275mV ( default Vtt should be 1.13V AFAIK, so +275mV = 1.405V )
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
nice sticks.
Gaming/Rendering rig:
eVGA X58 Tri-SLI
Intel i7-970 w/ Corsair H100
24gigs Corsair 2000s
eVGA GTX580 3GB
Too many HDD's
LG Blu-ray player
Corsair hx1050 psu
Corsair 800D case
I think I'll give the RAM a shot under LN2 later on today
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
Bench...got the same ram but on mobo is ramapage 3 extreme. Can u post up ur complete BIOS settings u used for OCing? I want to get a higher blck as my wall is 220 at the moment. RAM is running at 1800mhz solid and stable. I think with ur BIOS settings I can get a better understanding of why I might be missing out on settings wise to crack the 220 barrier. Thank u very much in advance!
Upgrade to BIOS 1003 or 0878 ( I'd go for the latter ).
Depending on the CPU you'll need 1.3V to 1.4V Vtt ( DRAM/QPI Voltage ).
Vram at 1.7V max, 1.65V is more than enough even for DDR3-2600.
tRFC 80 or so, tRCD 9.
CPU Clock Skew = delay 300ps
PCI-E Frequency = 105MHz
QPI PLL Voltage = 1.45V
CPU PLL Voltage = 1.89V
IOH PLL Voltage = 1.8V
IOH Voltage ( NB ) = 1.275V [ NB cooled with fan, temps over 65C make it unstable at high BCLKs with B2B disabled ]
I might install them on sofos's Rampage 3 Extreme later to give you a "surely" working template.
On another note, I have tried them on the R3E when I played with sofos on LN2 a few days ago, and it wouldn't even POST at DDR3-2600 while I could boot into Windows at DDR3-2700+ on my Classified.
Don't know how high the R3E can clock the mems yet, as I don't have a board myself and neither spent a lot of time exploring the R3E's RAM overclocking capabilities.
It's gonna be a while though.
Need to get a new CPU, hopefully a good one with a good IMC too.
Once that requirement gets fulfilled I'll LN2 them and max them out
That'll be done in the coming weekend hopefully ( unless my new CPU's delivery gets delayed )
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
I might beat you do it
Bookmarks