Corsair Dominator GTX3 6GB Triple Channel Kit testing

[BenchZowner]

Max Vtt used was +275mV ( default Vtt should be 1.13V AFAIK, so +275mV = 1.405V )

[clo007]

nice sticks.

[BenchZowner]

I think I'll give the RAM a shot under LN2 later on today

[cstkl1]

bro can u try 2k c6 same gskill pi c6

[JenBell]

Bench...got the same ram but on mobo is ramapage 3 extreme. Can u post up ur complete BIOS settings u used for OCing? I want to get a higher blck as my wall is 220 at the moment. RAM is running at 1800mhz solid and stable. I think with ur BIOS settings I can get a better understanding of why I might be missing out on settings wise to crack the 220 barrier. Thank u very much in advance!

[[200]]

I think I'll give the RAM a shot under LN2 later on today

Very keen for these kind of results.

[BenchZowner]

Bench...got the same ram but on mobo is ramapage 3 extreme. Can u post up ur complete BIOS settings u used for OCing? I want to get a higher blck as my wall is 220 at the moment. RAM is running at 1800mhz solid and stable. I think with ur BIOS settings I can get a better understanding of why I might be missing out on settings wise to crack the 220 barrier. Thank u very much in advance!

Upgrade to BIOS 1003 or 0878 ( I'd go for the latter ).
Depending on the CPU you'll need 1.3V to 1.4V Vtt ( DRAM/QPI Voltage ).
Vram at 1.7V max, 1.65V is more than enough even for DDR3-2600.
tRFC 80 or so, tRCD 9.
CPU Clock Skew = delay 300ps
PCI-E Frequency = 105MHz
QPI PLL Voltage = 1.45V
CPU PLL Voltage = 1.89V
IOH PLL Voltage = 1.8V
IOH Voltage ( NB ) = 1.275V [ NB cooled with fan, temps over 65C make it unstable at high BCLKs with B2B disabled ]

I might install them on sofos's Rampage 3 Extreme later to give you a "surely" working template.
On another note, I have tried them on the R3E when I played with sofos on LN2 a few days ago, and it wouldn't even POST at DDR3-2600 while I could boot into Windows at DDR3-2700+ on my Classified.
Don't know how high the R3E can clock the mems yet, as I don't have a board myself and neither spent a lot of time exploring the R3E's RAM overclocking capabilities.

Very keen for these kind of results.

It's gonna be a while though.
Need to get a new CPU, hopefully a good one with a good IMC too.
Once that requirement gets fulfilled I'll LN2 them and max them out
That'll be done in the coming weekend hopefully ( unless my new CPU's delivery gets delayed )

[[200]]

I might beat you do it