Kingston HyperX LoVo 1866 @ 2250+ Mhz 1,5v !!!

[Tomasis]

wez, everything looks fine, cpu mem on old mobo as mine, well done bios rev f8k?

what memvolt? I suppose it is not v2,05

[wez]

wez, everything looks fine, cpu mem on old mobo as mine, well done bios rev f8k?

what memvolt? I suppose it is not v2,05

Hehe nah, 2.05v is for another pair of sticks :P
1.75v for 1720 fully stable and 1.8v for the 1800 spi32m. Still on f8h, haven't had a chance to give f8k a fair go yet.

http://www.techreaction.net/2010/05/...99-oc-testing/

[SF3D]

I tested these sticks on my RIIIE and 980X

There are some system limitation at the moment, but someone with P55 will make these fly for sure.

Here is stock settings and 1.2985V 32M


Here is CL 9 1000MHz 32M with 1.49725V


Here is CL 8 1000MHz 32M with 1.55V


Here is CL 7 1000MHz 32M with 1.749V


So in my tests, these are doing ok, but nothing spectacular have been found or seen. These stick seems to like CL 8 most.

If the price is good, these might be your choice.

[websmile]

Well, might be the layout of the PCB-but I have to say that the Clock7 performance is disappointing in my opinion-thank you very much for sharing, me and a good friend of mine thought about buying the lovos but for me the risk is too high after seeing these results

[SF3D]

Well, might be the layout of the PCB-but I have to say that the Clock7 performance is disappointing in my opinion-thank you very much for sharing, me and a good friend of mine thought about buying the lovos but for me the risk is too high after seeing these results

I think you need to wait, if someone can test these sticks on P55 or in different setup
For some reason my CL7 tests need a lot of juice in here.

[websmile]

Both my STT 2200 as well as my ProjectX 2000 C7 need a lot less voltage for 1000 C8 and C9 as well-maybe it´s the X58 setup, but considering that the sticks cost about 160€ in germany I´m not taking the risk-even if the sticks need less V on a different setup for 1000 C7-maybe the Lovo are wonderful 24/7 rams with their 1,35V 15000 specs but that´s not what I´m looking for so your results did help a lot-thanks again

[barong]

i have kingston hyperx lovo 1800, does it have the same chip with the 1866?

[websmile]

i have kingston hyperx lovo 1800, does it have the same chip with the 1866?

You might make a test- if they run 1600 6-6-6-20 at around 1,65V on your system, the chance the ICs are Hyper is 99,9%

[CryptiK]

^BBSE does that too, so its not indicative of Hypers only.

[Hondacity]

^BBSE does that too, so its not indicative of Hypers only.

spot on

even the new 2000 6-8-6 ....can do 1600 6-6-6

[Shiranui Gen-An]

Gotta be some really good BBSE to do 1600 6-6-6 on 1.65v.

[CryptiK]

My BBSE kit does it easily, also did DDR3-1600 6-7-6-20 1T @ 1.535v.

[websmile]

Looks nice- my Team 2200 LV did 900 Cl6-8-6-18 1T with 1,5V- but no chance on 1600 Cl6-6-6 with 1,65

[Shiranui Gen-An]

My BBSE kit does it easily, also did DDR3-1600 6-7-6-20 1T @ 1.535v.

Well, the Tridents are a special case

[dude1992]

For some more P55 results try to see this review i did:

http://www.octeamdenmark.com/anmelde...-.html?start=4

Only with 1.65V

If you have some settings you would like tested feel free to ask

[zsamz_]

My BBSE kit does it easily, also did DDR3-1600 6-7-6-20 1T @ 1.535v.

my tridents did 1800 6-8-6 1.65v alse bbse

[youngpro]

900 6-6-6
1000 7-7-7
should be a fairly safe indicator of hypers...

[websmile]

900 6-6-6
1000 7-7-7
should be a fairly safe indicator of hypers...

On Intel you are right- I answered the question with 800 6-6-6 because the user who asked has a 790 AMD chipset where even with an X6 it might be difficult to reach 900 Cl6 at 1,65V, and 1000 C7 on air are nearly impossible with a decent 1,65V

[toyone]

My 1866CL9 LoVo quick test.
CL7 1.4V 1622.8 MHz
CL7 1.5V 1785 MHz
CL8 1.4V 1823.2 MHz
CL8 1.5V 1909 MHz

[subaruwrc]

My 1866CL9 LoVo quick test.
CL7 1.4V 1622.8 MHz
CL7 1.5V 1785 MHz
CL8 1.4V 1823.2 MHz
CL8 1.5V 1909 MHz

we should restest them with the newer bios on my board.

[ZenEffect]

The latest kingston HyperX 1866 LoVo are NOT elpida hyper ic anymore. the ones with hyper ic are 122.a00lf the ones without are 032.a00lf

just fyi if anyone is still interested in these kits. i dont know what the ic is on the new ones... they are kingston branded.

[dinos22]

they are also going EOL too 1866 ones

I am waiting for an email today for some clarifications on other LoVo models which may be Hypers. If i find something i'll let you guys know.

[ZenEffect]

they are also going EOL too 1866 ones

I am waiting for an email today for some clarifications on other LoVo models which may be Hypers. If i find something i'll let you guys know.

im on the phone with kingston right now trying to figure out what ic are under these piece of garbageses *they are checking with the store room right now finding me the hypers to cross ship. their customer support is great*

what is printed on the non-hyper ic is this

Kingston
50366254
1019
S2C
D1288JELDP J9U
MDA776000E

any ideas? they dont clock well AT ALL.

*edit*

kingston in fountain valley california has NONE left in stock and they said its phased out.

[ZenEffect]

here is what i got in the mail today


"
Hi Davis,

We can not find any BOM# and match your old HyperX memory. However, one option is swap your 2 kits (4 memory sticks) with KHX2000C9AD3T1K2/4GX
with same BOM# of course and the memory Spec is:


4GB 2000MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) XMP T1 Series (Compatible, Non-proprietary)







Standard 256K X 64 Non-ECC 2000MHz 240-pin Unbuffered DIMM (DDR3, 1.65V, CL9, FBGA, Gold)






This one has tall heat sink and it is not the low voltage (1.35v) as the ones you have.
The last option is refund to you and please attach the proof of purchase (invoice/receipt) so I can set it up for you.

If you have any other questions or concerns, please feel free to reply to this e-mail with full email history. Thank you for using Kingston on-line technical support.

Best Regards,
############

Kingston Technology
Technical Support
8am - 5pm Monday through Friday PST

==============================================
PLEASE INCLUDE ALL EMAIL HISTORY WHEN RESPONDING. Failure to do so may result in your email being delayed or going unanswered. Please check your email settings to make sure it's configured properly to include the history. Please DO NOT modify the subject line as it's needed for proper routing. Emails are normally responded within 24 business hours.

Note: If you are sending or receiving attachments. To protect against computer viruses, e-mail programs may prevent sending or receiving certain types of file attachments. Check your e-mail security settings to determine how attachments are handled and check your "junk" folder to ensure emails are not being routed there.
=============================================




This email and attachment(s) may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
"

from this email it appears the latest lovo kits are bdbg. and they dont have any at all anyways so...... yea.

what would YOU do in this situation? I'm thinking refund as I AM entitled because they dont mix with the hyper ic lovos @ stock speed, voltage, and timings.

[l0ud_sil3nc3]

that's cool they are willing to refund the purchase price