Bloodrage Problems. Please help!

[Mabyboi]

The Bloodrage motherboard that ive been using for months has been working perfectly until recently. I took all the components off the board (cpu, ram, gpu etc) and put them all up for sale. After selling all the components to the same person, and putting them all back on the same board (keep in mind its the exact same configuration as when it was working), the third ram slot to the right has stopped working. The board wont post when there is a stick of ram in that slot, but boots fine when there was 2. Error code 89.

The board wouldnt boot from CD in order to install windows, but did boot from USB. After flashing the bios to the most recent the board wouldnt boot at all, Error code A1, but then all of a sudden everything worked again, the ram slot was fine, and the whole board booted just fine until today.

The board wont boot, switching the bios's produces an error, and it wont boot from CD, when booting from USB another error code appears.

I really hope this isnt an error that requires an RMA for the board and it is a last resort. Please help ASAP!.

[zsamz_]

looks like corrupted bios issue

reseat the cpu i bet 1 pin not doin proper contact then reflash bios

[Mabyboi]

looks like corrupted bios issue

reseat the cpu i bet 1 pin not doin proper contact then reflash bios

Re-seating it didnt work...

[dengyong]

Tell us more about the disassembly, did you have a backing plate stuck to the back of the board ?

If there is no physical damage I'd say you have a corrupt bios.

[Mabyboi]

Tell us more about the disassembly, did you have a backing plate stuck to the back of the board ?

If there is no physical damage I'd say you have a corrupt bios.

there was a backplate attatched for the Waterblock, but that has come off before and been put back on and it worked fine before... there are a few bent pins but not really enough to create problems...