I am almost done with a prototype Waterblock for the EVGA SR2. Currently just messing around with Alumn, but the real version will be pure Copper.
I am almost done with a prototype Waterblock for the EVGA SR2. Currently just messing around with Alumn, but the real version will be pure Copper.
Internal pictures? Looks really sleek.
Thanks! no internals yet, still in the process of drilling and tapping. Once the hole placement is complete, milling is next.
Just figure this entire sheet will be solid copper.
Like this !
BTTB - Gigabyte Z87X-OC - WCed I7 4770k - 2x8gb Ballistix 1600mhz - Zotac GTX 780
Asus Xonar Pheobus - OS -> Toshiba Q 256gb - Games -> 2x Agility 4 256gb Raid0
Corsair HX850 - Tecnofront HWD BenchTable - Asus VE278Q 5760x1080
Serveur - Asus Z77m PRO - 2500K - NH-C12P - 4x4gb G.Skill Ares 1600mhz
Agility 4 128gb - Corsair CX430M - 1TB Black - 2TB green - 2TB Red
KatPat - Gigabyte 990FXA-UD3 - FX-8320 - PH-TC14CS - 2x4gb Viper 1600mhz - GTS 450
Samsung Evo 120gb - Corsair HX750 - Bitfenix Survivor White - Asus VE247H
Sexy! Especially the first pic!
Awesome. looks very nice
ATCS 840| Core i7 920 - 4.2Ghz - H20| Corsair Dominator GT 1600Mhz 6GB| EVGA X58 Classified| GTX480 2-Way SLI| WD 640GB X2 (Raid 0)| Corsair HX1000W
So here is where we stand at the moment.
Since this is just a prototype I have a warm and fuzzy about starting actual production. I picked through every stash I could find for screws, but this was all I could find, so forgive the dark empty holes.
I tired to pretty up the plastic on the belt sander but this plastic was too "rubbery" to be sanded. The next one will be Copper and Delrin (POM)
looks class man!
That area covering the SB and NF200s should have some sort of logo on it!
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
Water flow only over the NB? Otherwise, that means some very thin channels past that right barb...
You should move the right barb to the bottom middle right of the block so at least some water is flowing over those chips instead of going straight in and out of it
Barbs anywhere other than the top row (where they are now) would potentially impede GPUs....
Best to just leave them where they are and have a complex flowpath
Some others have suggested putting a barb on the area directly over the South Bridge. In reality that will block any "potential" SLI setups. If you know that you will NEVER use those bottom 2, I can really put the nozzle anywhere you want. The nozzles where they are now allow access to all PCI-E slots.
I will be placing an order for the raw material to make these soon. If you are interested, shoot me a PM.
sick stuff nateman! Cant wait to see some results and temps with it
Nice looking block! Good work.
| Corsair Carbide Air 540 | Asus Sabertooth Z77 | Intel Core i7 3770K | 16GB G.Skill Sniper | Asus GeForce GTX Titan | 500GB Samsung 840 | Asus Xonar Essence STX | AOC G2460P 144Hz
mmm, I like, pm sent.
Samsung 42" LCD/Antec 1200 Case/Corsair 1000W PS/ Gigabyte GA-X58A-UD7 / Intel I7 990X 3.47 @ 4.5 / 3 x RX360 rad /Apogee Xt /2 x 128gb Patriot Torqx M28's @ Raid 0/ WD 600Gb VelociRaptor / Kingston Hyper X 12Gb (6x2) DDR3 2000/ XFX DD HD 7970
anything planned for the cpu's Vreg ?
BTTB - Gigabyte Z87X-OC - WCed I7 4770k - 2x8gb Ballistix 1600mhz - Zotac GTX 780
Asus Xonar Pheobus - OS -> Toshiba Q 256gb - Games -> 2x Agility 4 256gb Raid0
Corsair HX850 - Tecnofront HWD BenchTable - Asus VE278Q 5760x1080
Serveur - Asus Z77m PRO - 2500K - NH-C12P - 4x4gb G.Skill Ares 1600mhz
Agility 4 128gb - Corsair CX430M - 1TB Black - 2TB green - 2TB Red
KatPat - Gigabyte 990FXA-UD3 - FX-8320 - PH-TC14CS - 2x4gb Viper 1600mhz - GTS 450
Samsung Evo 120gb - Corsair HX750 - Bitfenix Survivor White - Asus VE247H
Actually I will have you know that I can certainly make a dual CPU cooler that will cover Both CPU's. I was going to start drafting that up soon, but I have something FAR more ambitious planned for the CPU's.
But like I said, I will be ordering the raw materials for the first batch this week (wed the latest) so if anyone would like to jump on board let me know.
Looking good nate..if only i owned an SR-2
[SIZE="1"]Main Rig:
- New rig incoming -
Watercooling Loop: Pump: Laing DDC 3.2 w/ XSPC Reservoir Top | Tubing: 1/2 x 3/4" | Waterblock: Apogee GTZ | Radiator: XSPC RS360 | Fans: 3x Delta FFB1212EHE | Fittings: Fatboy Barbs | Other: 5ft Custom Bong Cooler for benching
Looks great!
The MIPS block for the P6T6 looks really small in pictures, and smaller in person, but it does what it needs.
Thanks! not sure what the mips is about though?
Bookmarks