3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[Mafio]

wow, great frequency with 6-6-6

VDIMM ?

[crazydiamond]

thanks, 1774mhz, 6.6.6, 1.725vdimm in bios, think its actuallly closer to 1.73

[Praz]

Super Talent 2200 C8 on AMD, memory voltage - 1.6625V.


click for larger image

[radaja]

crazydiamond,thats just crazy.you have got a great kit indeed.
im going to be testing mine with my new 980x this weekend.still learning
the hew cpu,but i should get some good results.

[Mafio]

thanks, 1774mhz, 6.6.6, 1.725vdimm in bios, think its actuallly closer to 1.73

that's crazy
i need to get a kit of these beauties

radaja: waiting for your results

[crazydiamond]

Super Talent 2200 C8 on AMD, memory voltage - 1.6625V.


click for larger image
snip

very nice

[Shiranui Gen-An]

I tried another board, P6X58D Premium without much success compared to my X58A-UD7, so I know my board isn't holding the STT sticks back, it's my CPUs. Since getting a 3845 chip is next to impossible these days, would something like a 960 be a sure thing for a stronger IMC or is it still luck of the draw?

[Ccaution]

( Cute imc in that 1035T, ooohh I am so gonna get one of them as soon as they are released )

[zsamz_]

I tried another board, P6X58D Premium without much success compared to my X58A-UD7, so I know my board isn't holding the STT sticks back, it's my CPUs. Since getting a 3845 chip is next to impossible these days, would something like a 960 be a sure thing for a stronger IMC or is it still luck of the draw?

a weak imc just gonna take more qpi volts

[Shiranui Gen-An]

Got a different 920, batch 3949A596, doesn't seem any better than the 3946A172 Why is it so hard to find a chip with a good IMC?!

[eva2000]

ah even Praz has a kit of these fine modules

Got a different 920, batch 3949A596, doesn't seem any better than the 3946A172 Why is it so hard to find a chip with a good IMC?!

really bad luck there it seems, i read psu could effect clocks too so worth a try ?

[BeepBeep2]

Testing my kit on this new ASUS board, hoping for better results.

[crazydiamond]

there might be a little bit more in them beep

1790mhz 6.6.6 32m

[andressergio]

there might be a little bit more in them beep

1790mhz 6.6.6 32m

great results mate

[Shiranui Gen-An]

ah even Praz has a kit of these fine modules



really bad luck there it seems, i read psu could effect clocks too so worth a try ?

Using a Corsair CMPSU-1000HX here, but I've pretty much narrowed it down to the boards. For some reason the Gigabyte X58A series needs a lot more VTT. There's a cheap P6T6 WS Revolution on eBay I may snag and dump these Gigabuts

[zsamz_]

Using a Corsair CMPSU-1000HX here, but I've pretty much narrowed it down to the boards. For some reason the Gigabyte X58A series needs a lot more VTT. There's a cheap P6T6 WS Revolution on eBay I may snag and dump these Gigabuts

just give it more vtt man
i'm glad i didnt get another gigabut board
gave gigabut another chance with p55-ud4p and the board crapped out in days
personally i wouldnt but i ud7-ud9 unless it was under 100$

[Shiranui Gen-An]

just give it more vtt man
i'm glad i didnt get another gigabut board
gave gigabut another chance with p55-ud4p and the board crapped out in days
personally i wouldnt but i ud7-ud9 unless it was under 100$

Why pump more VTT into the chip than is necessary? 1.60v is pretty stupid just for DDR3-2000 C8 on the 2:10 divider. That's the kind of volts one should need for doing 2100+! Still trying to figure out why a board with 24-phase power regulation for CPU and 3-phase on the memory is getting burned by a board with 16-phase on the CPU and 2 for the memory. I'd think the UD7 would have better voltage regulation and thus need less juice

[zsamz_]

i never needed such voltage
i need 1.44-1.48 when running 12gigs 2k cas8
i like the digital pwm of the rexIII uses less juice
24 phases dont mean a thing if its a bs phase

Why pump more VTT into the chip than is necessary? 1.60v is pretty stupid just for DDR3-2000 C8 on the 2:10 divider. That's the kind of volts one should need for doing 2100+! Still trying to figure out why a board with 24-phase power regulation for CPU and 3-phase on the memory is getting burned by a board with 16-phase on the CPU and 2 for the memory. I'd think the UD7 would have better voltage regulation and thus need less juice

[crazydiamond]

great results mate

thanks andressergio think it might be best for these dimms on amd w/ air cooling,,, looking at having to push 1.74+vdimm for 1800c6, we'll find out tonight

[BeepBeep2]

Have an overdrive screen I can look at?

I corrupted my windows install at 1766 1.72v...not looking good for my cause.

[crazydiamond]

Have an overdrive screen I can look at?

I corrupted my windows install at 1766 1.72v...not looking good for my cause.

overdrive screen for sub settings? check pm

[Oliver]

ah even Praz has a kit of these fine modules

And a sweet kit not to mention, not shabby clocks they are pushing

[andressergio]

thanks andressergio think it might be best for these dimms on amd w/ air cooling,,, looking at having to push 1.74+vdimm for 1800c6, we'll find out tonight

welcome mate i will have a pair in some 3 days to test with my EP45T USB3P and my X3380
hope i can join with some nice numbers

Cheers
Sergio

[bomberboysk]

Very tempted to pick up a set of these with my first paycheck at my new job...

[Barr3l Rid3r]

overdrive screen for sub settings? check pm

Hey I want it also!