3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[zsamz_]

Yeah, but if you go by that...

Then the 2200 CL8's should do 2000 CL7 and then 1800 CL6.

The 2000 CL7 theoretically should be a bit better than the 2200 CL8. 2000 CL7 ram should not have much problem doing 1800 CL6 but this ram seems to have trouble with it.

when i put my 920 in i gonna show ya 1800 cas6
i think they all the same chips just some luck involved

[radaja]

yep i agree.same stuff just its whether you get a decent kit.

[zsamz_]

yep i agree.same stuff just its whether you get a decent kit.

jackpot for radaja

[Shiranui Gen-An]

OCZ3RPR1866LV6GK
i'm happy i bought em lol
i took the gamble maybe they were from the bad batch but jackpot
i wish i bought 10 sets when they were sellin @ 130$ i paid 180$

Your Reaper kit uses MNH-E? If so what lot#? Seems the stuff 0910 and later is fine.

[zsamz_]

Your Reaper kit uses MNH-E? If so what lot#? Seems the stuff 0910 and later is fine.

it was only 1 batch that was bad

[Don_Dan]

I used Radaja's settings as a starting point and I was able to get 1740 6-6-6 stable at 1.70v. Very strange that less volts worked.

Do you have a fan over your memory? Please check temps, Hypers don't like to get hot.

[Shiranui Gen-An]

Do you have a fan over your memory? Please check temps, Hypers don't like to get hot.

Of course. Using an old Dominator fan.

[radaja]

whats the max vdimm for hypers for benching?

[zsamz_]

whats the max vdimm for hypers for benching?

dont kill the memory they new
i'd say 1.8
but i havent given more than 1.68 till now

[BeepBeep2]

I've got Prime95 for hours at 1.75v with no apparent harm. I'd be afraid to go over 1.78-1.8v for benching.

[Hondacity]

rams have been used over 1.75v and less than 1.8v ....no crashes yet...

[BeepBeep2]

Just make sure they don't get hot. You need alot of airflow over the side, I've got a 50 CFM 92mm fan over them. They get really hot even at 1.65v without airflow.

[andressergio]

Personally i dont like and use those fans that comes with Gskills or Corsair as hot air gets trapped inside...i prefeer to use a side fan or 2, i have 1 pointing the MCH and mem from the left and a 12x12 blowing from the other side

i have them set as this, GSkills PIS 2000CL6





Cheers !
Sergio

[radaja]

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

[andressergio]

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

lol 5C thats a nice temp radaja thanks to my new parts i dont need AC anymore

[radaja]

yea event with my WC ing still use the AC because when i was air cooling using the UD3P
i got used to the MB sensor always showing 15c and now its like with all my new setups
the MB and NB must fall in line.OCD kind of a thing.they all need to be below 25c or it will
drive me nuts

[andressergio]

yea event with my WC ing still use the AC because when i was air cooling using the UD3P
i got used to the MB sensor always showing 15c and now its like with all my new setups
the MB and NB must fall in line.OCD kind of a thing.they all need to be below 25c or it will
drive me nuts

lol Mr Ice

my set will be in my friends house on thursday and then a week and some days to arrive here, cant wait to test them

Cheers
Sergio

[zsamz_]

lol 5C thats a nice temp radaja thanks to my new parts i dont need AC anymore

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

[andressergio]

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

hell yeah i have an UFESA 11k btu portable also that used on summer to chill the rad

[radaja]

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

i got a feser quad120 rad on the way.thanks for the tip

[zsamz_]

i got a feser quad120 rad on the way.thanks for the tip

feser quad120 love on da a/c commin

[systemviper]

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

sweet

[zsamz_]

sweet

i got second a/c to cool the room wife dont want it anywhere else she thinks they ugly thigs

[eva2000]

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory

trying some 12GB Elpida Hyper action next

[CryptiK]

Personally i dont like and use those fans that comes with Gskills or Corsair as hot air gets trapped inside...i prefeer to use a side fan or 2, i have 1 pointing the MCH and mem from the left and a 12x12 blowing from the other side

i have them set as this, GSkills PIS 2000CL6

http://img541.imageshack.us/i/p10406841.jpg
http://img541.imageshack.us/img541/7513/p10406841.jpg



Cheers !
Sergio

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

Heh, you guys are soft, the ram fans are fine In all seriousness I think they are, it's not like the inside of the case is very hot if you have good case airflow, and the ram is easy to cool.

i got a feser quad120 rad on the way.thanks for the tip

Same rad as I use, I expect you'll like it.

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory

trying some 12GB Elpida Hyper action next

http://img.i4memory.info/reviewimage...c8_12GB_01.jpg

http://img.i4memory.info/reviewimage...c8_12GB_02.jpg

That's some ram pr0n right there George