3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[eva2000]

If you look under the lip of the heatspreader it says "BP ML XXXXXX" just like Hondacity's photo. It's definately a Brainpower 8 layer PCB.

I just with my set didn't suck...

6-6-6-20 @ 1720 1.71v is the max for these, already did 4 days of drive strength and stability testing.

Thinking of selling these and scrapping up the money for the Super Talent 2000 C7...

hmm can't peek in that far under heatspreader LOL

could be your AMD platform holding it back too ?

so do you think the 3x2 ddr3-2000 cl8 kit is hyper's too?
im about to buy a kit,so if anyone knows for sure let me know ok?thanks

From http://i4memory.com/f83/super-talent...00-cas8-23675/ several folks emailed/phoned ewiz seems super talent 2000c8 is MNH-E Hyper, 2200c8 is MGH-E hypers

CAS6 scaling of my 2200C8 are pretty close but just behind Dominator GTX2 reported by youngpro at http://i4memory.com/f83/ram-cooling-analysis-22963/ and my Kingston 2000c8

thanks Beep.and i wont blame you if they're not.
i was thinkng the same thing with the 2200's and buying the extra stick
but my only worry is that the one stick happens to suck ass
so i think i will just go the 3x2 kit and just live with 2000 speeds
woth it for the price of 215

my other option is the G.Skill perfect storm 3x2 ddr3-2133 cl9's

have you looked at the actual IC's by any chance?how does your kit OC?

my 3 kits of 2200c8, one kit 900mhz 6-6-6-20 1t at 1.7v the other 2 kits 894mhz 6-6-6-20 1t at 1.7v so pretty close not as good as kingston 2000c8 or james' corsair dominator gtx2 @925mhz 6-6-6-20 at 1.74v

Alomst 2400MHz 8-8-8 @ 1.7V
Jaw-breaking results as always George. Every time I see one of your threads, I just know it is going to be awesome Can't wait for some high voltage SPi 32M CL6 & CL7 action!

Could you please test 32M 6-6-6 and 7-7-6 at around 1.85V?

Thanks, it helps to have i7 980X though hehe although IMC ain't as good as my 3845 batch bloomfields which have much higher air/water uncore frequency capability in 4400+ mhz range for 32m pi.

I haven't pushed such high vdimm since my old original SKU Corsair Dominator GT but since that kit died haven't pushed more than 1.8v as the new stuff seems to clock better with just <1.8v. With i7 980X i'm limited by uncore frequency below 1.55v cpu vtt uncore ceiling is around 4220mhz so not necessarily will scale with just shoving vdimm as you'd know. So lucky i7 980x has lower 1.5x ratio requirements to keep cpu vtt a tad lower hehe.

yep as soon as i get the funds,which should be tonight

sweet, hope you get a great set

[radaja]

thanks for all the info eva2000

[BeepBeep2]

hmm can't peek in that far under heatspreader LOL

could be your AMD platform holding it back too ?

The Corsair GTX2 do ~1880 6-6-6-18 with 1.70v on AMD...my ram isn't really what I expected, I would have liked at least 1800.

[Shiranui Gen-An]

I have three of the 2GB STT DDR3-2200 C8 sticks on the way but they won't get here until Tuesday. I'll have to go for some tighter timings because I can't really push uncore past 4200MHz on my chips

[runnin17]

Ordered one 2GB stick of the STT 2200 C8. Going to pair it with my 3x2GB GTX2 set. I'll see how they scale together. I will be on AMD with a 1090T, so hopefully I can get close to 2000 C6 like chew* did with GTX2 set, but if not I will still be trying out a stick of the STT 2000 C7 and see if that pairs well with my GTX2's.

[Shiranui Gen-An]

I broke down and ordered another kit, the 3x2GB 2000 C7 one. It'll be fun to mix and match the modules to see which ones work the best. The Patriot Vipers may be headed to "For Sale" land lol

[radaja]

oh i didnt even see the cl7 kit.thanks

[BeepBeep2]

Ordered one 2GB stick of the STT 2200 C8. Going to pair it with my 3x2GB GTX2 set. I'll see how they scale together. I will be on AMD with a 1090T, so hopefully I can get close to 2000 C6 like chew* did with GTX2 set, but if not I will still be trying out a stick of the STT 2000 C7 and see if that pairs well with my GTX2's.

Scared me there for a second...

[johnnymossville]

oh i didnt even see the cl7 kit.thanks

yeah, I didn't know they had that either. might give it a look.

*just did* I think the CL8/2000 is still the bargain hunters kit.

[BeepBeep2]

yeah, I didn't know they had that either. might give it a look.

*just did* I think the CL8/2000 is still the bargain hunters kit.

Yup.

I'm getting the CL7 2000 kit and selling off the third stick. I have no need for the third stick...

[radaja]

yea the 2000 cl8 is definitely a bargain
but 2000 cl7,i mean its cl7i want i want

[zsamz_]

Yup.

I'm getting the CL7 2000 kit and selling off the third stick. I have no need for the third stick...

keep the third stick just in case on goes boom lol

[BeepBeep2]

keep the third stick just in case on goes boom lol

If it goes boom I'll just RMA it.

Someone in this thread who mentioned they bought one stick of 2200 C8 to pair for their GTX2 is buying it

[radaja]

heads up
wow what luck someone is selling a kit of Super Talent
2x2GB DDR3-2200 cl8 in the FS section

you should grab these Beep

[BeepBeep2]

heads up
wow what luck someone is selling a kit of Super Talent
2x2GB DDR3-2200 cl8 in the FS section

you should grab these Beep

LOLWUT? I'm selling those

[systemviper]

I want one of the gskill pi sets, i was thinking of these F3-16000CL6D-4GBPIS

[BeepBeep2]

I want one of the gskill pi sets, i was thinking of these F3-16000CL6D-4GBPIS

Depends what hardware you are running on. 6-9-6-24 2T is nothing spectacular on AMD (high TRCD) but if you could put that at 1T and stable on P55 it would be good.

[systemviper]

Depends what hardware you are running on. 6-9-6-24 2T is nothing spectacular on AMD (high TRCD) but if you could put that at 1T and stable on P55 it would be good.

it for a p55 system i am finishing, so i figured i throw them out there and see how they are recieved. I actually have been looking at a set of GT 1600 cas6 but there not blue,...

[radaja]

I want one of the gskill pi sets, i was thinking of these F3-16000CL6D-4GBPIS

i got a set of 2200 cl7;s.the g.skills use PSC IC's hence the 6-9-6- or like mine 7-10-10-28.
they OC high but thr tRCD has to be two to three higher than cas.
here the one i have
G.SKILL PIS Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2200

[BeepBeep2]

it for a p55 system i am finishing, so i figured i throw them out there and see how they are recieved. I actually have been looking at a set of GT 1600 cas6 but there not blue,...

Mine are blue *cough* To be honest I'm just trying to get rid of these

PSC is going to pull 6-9-6 @ 2000 and not much more...maybe 6-8-6 at 1800.

[systemviper]

man seems there is so much to understand on which ram for which systems..

[BeepBeep2]

man seems there is so much to understand on which ram for which systems..

Yeah, there is.

My kit will do 2000+ CL7-7-7-20 1.65v on P55 most likely, but 6-9-6-24 is small bit faster. TRCD has lesser effect on P55 than on 7/890FX. It's just how the memory controller was designed. That's why it's crucial to have Elpida Hyper chips in AMD systems because they can run a tighter TRCD than any other chip on the market. As for P55, there are more options with really good, highend Hyper being the best performing and PSC, BBSE etc able to do high(er) frequencies but with lesser timings.

Anyway, it's usually the uncore that is the limiting factor when you buy a high-end kit anyway. In the real world there is almost no performance gain.

[andressergio]

Will buy one of theses 2x2 Stalent 2200 CL8 will test against my Gskills PI 2000 CL6 on the EP45T USB3P i want some hypers in ma hands

[radaja]

my kit should be here tomorrow

[andressergio]

my kit should be here tomorrow

nice radaja congrats mine should be on a friends house in 2 days, then a week to here cant wait