3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[Barr3l Rid3r]

and he's trying to compare results w/ AMD? I'm preaty sure my sticks can handle much more then 2000Mhz at C7-7-7-21Mhz I'm at only 1.65v for that... sadly my IMC dont go 1mhz step forward.

[Johnny87au]

Since I don´t know an UD9 for AMD you might mean Intel- I had the 2200Cl8 on an UD5 with an i860, at 1,66V they are Memtest stable around 1750 6-6-6-16 1T with Auto subs, Performance on Turbo- need a small amount more V(about 0,02V) than my 2000 ProjectX

Yeah thats about the same as mine..

[websmile]

Problem is the UD5 is a bad low latency clocker- same as with the P45 Gigabyte ddr2 boards I had- on another board could the results be better by far- I had better cl6 results on an Asus X38 P5E3 WS Pro than on the P55 UD5 usinbg same Ram- but on cl8 and 9 the board and my i860 do very well, I have no problems reaching 1150 Cl8-8-8-24 1T Memtest stable around 1,66V with my 2200s, the 2000 C7 do even better

[Barr3l Rid3r]

Problem is the UD5 is a bad low latency clocker- same as with the P45 Gigabyte ddr2 boards I had- on another board could the results be better by far- I had better cl6 results on an Asus X38 P5E3 WS Pro than on the P55 UD5 usinbg same Ram- but on cl8 and 9 the board and my i860 do very well, I have no problems reaching 1150 Cl8-8-8-24 1T Memtest stable around 1,66V with my 2200s, the 2000 C7 do even better

Really bad board, only 1760 6-6-6, what a shame.



I'm kidding right.

[BeepBeep2]

Really bad board, only 1760 6-6-6, what a shame.



I'm kidding right.

I can only hit 1760 6-6-6 with 1.75v

[Barr3l Rid3r]

I can only hit 1760 6-6-6 with 1.75v

I've runned everest @ 1840Mhz 6-7-6 today w/ 1.75v... but when I saved the SS the computer restarts..

[BeepBeep2]

I've runned everest @ 1840Mhz 6-7-6 today w/ 1.75v... but when I saved the SS the computer restarts..

I can't boot 1800 6-7-6 nomatter what voltage I use...that might tell you a bit.

I did a TON of subs tweaking to get where I was at for that review.

[Barr3l Rid3r]

I can't boot 1800 6-7-6 nomatter what voltage I use...that might tell you a bit.

I did a TON of subs tweaking to get where I was at for that review.

can u pass me your final settings?

gigabyte 790fxt-ud5p has only a few settings.

I'm having trouble to make it stable at 1800 C7

[Johnny87au]

My bet is your gonna have to use cas 7, try 776 .. few tweaks you should be fine.. Find your Stable Clock then tweak it..

[BeepBeep2]

can u pass me your final settings?

gigabyte 790fxt-ud5p has only a few settings.

I'm having trouble to make it stable at 1800 C7

I ended up ditching the tweaking.

Your board is flaky...it's definately stable at 1800 C7 but its your board's fault.

My 890GX board had problems booting over 1800. If you boot at 1700 and inch up to 1800+ if will be fine.

If will POST one time, boot another time, be stable the third time, become unstable the fourth. You can't help it.

My 890GX board had a cap at 1880 Mhz as well, with my Deneb CPU. My ASUS board is stable as a rock at 1900. Go figure.

[FlyBoyGeo]

Can anyone tell me how tall the heatspreader is on these sticks? In mm?

Thanks.

[websmile]

The whole stick is about 5cm(2inches) high-from the upper edge of the PCB to the upper side of the heatspreader fins it is about 2cm

[FlyBoyGeo]

The whole stick is about 5cm(2inches) high-from the upper edge of the PCB to the upper side of the heatspreader fins it is about 2cm

Thanks for the quick reply, was curious as to the clearance and/or fit available with my Noctua NH-D14.

[panzerchaos47]

Are the current stock of single DDR3-2200 CL8 is hypers? I bought ones for my uncle's system with Crosshair IV + 1090T. The stick isn't made in USA anymore like I bought for my systems but they look the same.

I tried getting DDR3-2000 8-8-8-24 @ 1.7v everything is on stock except CPU is at 3.75 GHz with 1.35 vcore stable up to 3.8 GHz and CPU-NB is at 1.3 vcore. Not stable even at 1.75vcore

[shadewither]

Are the current stock of single DDR3-2200 CL8 is hypers? I bought ones for my uncle's system with Crosshair IV + 1090T. The stick isn't made in USA anymore like I bought for my systems but they look the same.

Could you please take a photo?

[BeepBeep2]

Are the current stock of single DDR3-2200 CL8 is hypers? I bought ones for my uncle's system with Crosshair IV + 1090T. The stick isn't made in USA anymore like I bought for my systems but they look the same.

I tried getting DDR3-2000 8-8-8-24 @ 1.7v everything is on stock except CPU is at 3.75 GHz with 1.35 vcore stable up to 3.8 GHz and CPU-NB is at 1.3 vcore. Not stable even at 1.75vcore

If they do 1600+ 6-6-6 they have to be Hyper or completely WTFBBQ magical BBSE.

[panzerchaos47]

If they do 1600+ 6-6-6 they have to be Hyper or completely WTFBBQ magical BBSE.

Thanks. I tested them at 1600 6-6-6-18 so far stable with blend prime95.


For the picture.
I don't really have good camera to take a show but I know my old ones back is Made in USA while this is in China.

[websmile]

Thanks. I tested them at 1600 6-6-6-18 so far stable with blend prime95.


For the picture.
I don't really have good camera to take a show but I know my old ones back is Made in USA while this is in China.

No difference with mine-I had 26GB made in USA(2000C7 and 2200 C8) and one kit that was made in china-did 1140 C8-8-8-24-1T at 1,66V-definitely Hyper

[Kain665]

Currently running 1950mhz 7-7-7-18 trfc 64 cr 1t at 1.64v great chips!

[Lolozaur]

STT 2000 CL7 3x2gb Kit
My findings : 2000 CL.7.7.6.18 1T 64 @ 1.66v
http://forum.lab501.ro/attachment.ph...5&d=1280423608
http://forum.lab501.ro/attachment.ph...6&d=1280423608
http://forum.lab501.ro/attachment.ph...7&d=1280423608
http://forum.lab501.ro/attachment.ph...5&d=1280579197

[websmile]

Yes, the ProjectX are great rams- also work fine with me, even better than my 2200 C8 on my 1156-had to import them from the states because in germany they are not available- think they are good enough to deserve their own thread

[radaja]

21x215@4515 DDR3-1720 6-6-6-24

[andressergio]

21x215@4515 DDR3-1720 6-6-6-24

very nice my friend

[zsamz_]

[QUOTE=radaja;4506712]21x215@4515 DDR3-1720 6-6-6-24
QUOTE]

nice job there bud

now gimme that ram

[radaja]

thanks guys.Ram is well taken care of,so is the board and HD and Cpu.
just look at all the fans all over my setup(overkillmaybe?)