Ouch, those fittings on the radiator would kill some flow : /
Ouch, those fittings on the radiator would kill some flow : /
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
I can't wait to see your custom water cooled TJ07 once it's done Wolfskin, excellent job so far! I've been thinking about getting the Silverstone TJ07, wondering if a Thermalchill PA120.3 could fit up on the underside where the two 120mm fans are located with some modding?
- Systemlord
* My Case Labs STH10 Build Log *
Computer System:
CPU = Intel i7 3770K
MOBO = Asus Maximus V Extreme
GPU = EVGA GeForce GTX 480 @ 880MHz|1760MHz|4200MHz @ 1.125v
RAM = 8GB Dominator GT's
SSD = Samsung 830 Series 256GB
PSU = SeaSonic X-1250W
SC = X-Fi Fatality Pro
CASE = Case Labs STH10
LCD = NEC MultiSync 1970GX 19"
OS = Windows 7 Ultimate 64-bit
Watercooling System:
CPU = EK Supremacy Nickel+Acetal
GPU = EK FC-480 GTX Nickel+Acetal
MB = EK-FB Asus M5E Nickel+Acetal
RES = EK-RES X3 250
PUMP = Dual Koolance PMP-450's w/ EK-D5 Dual Top CSQ
RAD = Dual HWLabs SR-1 560's w/Gentle Typhoon 1850rpm Fans
LIQUID = Distilled Water w/Petra's Pure Silver Killcoil
Awesome build looking forward to it
Another update for you!
The new mobo tray for the TJ07 is kinda crappy with that big hole in the across the metal so we had it replaced by an "old" model and it immediatly started looking much better!
Oni with the show! After much thinking on how to fixate the rad supports we had to go with screws because of the weight this rads boast! Performance does come at a price
Because the rad supports have such big flaps and we need to maximize the space in the bottom of the case, we decided to cut them down to half their original size!
The sacred Unibody of the TJ07 protected against evil (Soul_Train)
Let's move on to the marking, drilling and threading for the screws!
After the quick fix this is how they look now :icon_wink: The screws will later be replaced by smaller black ones, these are just for testing purposes!
I hope you guys like it!
Very Nice Work ! i love your frontplate ^^
Th final colors of your built would be black and white?
The only way I see to be able to fit a Thermalchill PA120.3 is cutting a hole in the top allowing the rad to fit in is having half over the top of the case and the other half under the top, without a skilled modder it might ruin the look of the TJ07. Yes you are right the HWLab's GTS 320 was one of two that Performance PC's inhouse modder said would fit, but the end results don't justify the horrible performance that the skinny GTS radiator would perform! Do you think that a Thermochill PA120.2 would be enough for just one quad core overclocked to at least @4GHz?
BTW really nice job tapping and marking all of those threads, I know how careful one must be doing those sorts of things!
- Systemlord
* My Case Labs STH10 Build Log *
Computer System:
CPU = Intel i7 3770K
MOBO = Asus Maximus V Extreme
GPU = EVGA GeForce GTX 480 @ 880MHz|1760MHz|4200MHz @ 1.125v
RAM = 8GB Dominator GT's
SSD = Samsung 830 Series 256GB
PSU = SeaSonic X-1250W
SC = X-Fi Fatality Pro
CASE = Case Labs STH10
LCD = NEC MultiSync 1970GX 19"
OS = Windows 7 Ultimate 64-bit
Watercooling System:
CPU = EK Supremacy Nickel+Acetal
GPU = EK FC-480 GTX Nickel+Acetal
MB = EK-FB Asus M5E Nickel+Acetal
RES = EK-RES X3 250
PUMP = Dual Koolance PMP-450's w/ EK-D5 Dual Top CSQ
RAD = Dual HWLabs SR-1 560's w/Gentle Typhoon 1850rpm Fans
LIQUID = Distilled Water w/Petra's Pure Silver Killcoil
Time to heat things up
Black Freezer ? hmmm sexxxy
A special thanks to Vincent and Bitspower for giving us some help on this project!
* My Case Labs STH10 Build Log *
Computer System:
CPU = Intel i7 3770K
MOBO = Asus Maximus V Extreme
GPU = EVGA GeForce GTX 480 @ 880MHz|1760MHz|4200MHz @ 1.125v
RAM = 8GB Dominator GT's
SSD = Samsung 830 Series 256GB
PSU = SeaSonic X-1250W
SC = X-Fi Fatality Pro
CASE = Case Labs STH10
LCD = NEC MultiSync 1970GX 19"
OS = Windows 7 Ultimate 64-bit
Watercooling System:
CPU = EK Supremacy Nickel+Acetal
GPU = EK FC-480 GTX Nickel+Acetal
MB = EK-FB Asus M5E Nickel+Acetal
RES = EK-RES X3 250
PUMP = Dual Koolance PMP-450's w/ EK-D5 Dual Top CSQ
RAD = Dual HWLabs SR-1 560's w/Gentle Typhoon 1850rpm Fans
LIQUID = Distilled Water w/Petra's Pure Silver Killcoil
Well guys i advice you to try get the old model our check with the shop waht model they have!
This one we have buy to the distributor in Europre where this case was purchased but i know from the comercial they will not have more to sel (a special favor)
But if they decide to make stock and sell i can them send some PM's
You can also contact direct to Silverstone as i tried, the problem was the time waiting for the new tray if i'm not roung 8 week's
Cumpz!
* My Case Labs STH10 Build Log *
Computer System:
CPU = Intel i7 3770K
MOBO = Asus Maximus V Extreme
GPU = EVGA GeForce GTX 480 @ 880MHz|1760MHz|4200MHz @ 1.125v
RAM = 8GB Dominator GT's
SSD = Samsung 830 Series 256GB
PSU = SeaSonic X-1250W
SC = X-Fi Fatality Pro
CASE = Case Labs STH10
LCD = NEC MultiSync 1970GX 19"
OS = Windows 7 Ultimate 64-bit
Watercooling System:
CPU = EK Supremacy Nickel+Acetal
GPU = EK FC-480 GTX Nickel+Acetal
MB = EK-FB Asus M5E Nickel+Acetal
RES = EK-RES X3 250
PUMP = Dual Koolance PMP-450's w/ EK-D5 Dual Top CSQ
RAD = Dual HWLabs SR-1 560's w/Gentle Typhoon 1850rpm Fans
LIQUID = Distilled Water w/Petra's Pure Silver Killcoil
can't help you on that! Don't if he have same measures!
looking nice so far, sub'd
Hey guys!
Between the 3rd and 5th of july i'm gonna test fit all the WC parts and do the tube routing!
Stay tunned for major photos!
Thx for the comments so far!
I'm looking forward to see the final project
Nice....great start mate
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
At the request of many families, here's another small update! We worked hard this weekend and the I'll post the result later today!
For now here it is:
The acrylic piece that's going to hide the 5.25" bays!
Fits like a glove. Well worth the time we waited for it lol
That's it folks.
More to come later today....
I couldn't keep you waiting so here it is!
After a long weekend with some drawbacks we managed to plan and excute most of the 2 WC loops. Here are the pics:
We had to cut the midplate for the first time to allow some tube routing behind the 5.25" acrylic cover!
My GTX480 with the EK Nickel + Acetal mounted
Rampage 2 Extreme sweetness with Bitspower and Ek cover...hhuummmm!
Let the games begin
Passing the loop bellow the midplate! we used a fillport and a 90º adapter to get the job done
Very little space to work in the lower section! sweet monster rads haha
CPU and Mobo loop finished...or maybe not! We did finish it but since i forgot the second pump, we had to remove parts of it to plan the GFX loop
After all th hard work and sweat, it was a 40º Celsius weekend, We had to discard one of the 250ml rez and replace it with a 150ml one (still on it's way). After some thinking We came up with a cool idea for the little rez and how to hold it in place but you'll have to wait and see if it works as intended!
Thx for reading!!
It's looking amazing bro now i wanna see the full WC and the paint Job
Coming along nicely
Bookmarks