Hey guys, I've been running my GT's with my new 970 which seems to have a decent IMC. However, I'm having tons of difficulty getting the sticks to pass 32M above 2050 7-7-6. I've seen tons of people running up to 2200 7-7-6 on SB.
Is this because SB's IMC is so strong or can these people do 2200 7-7-6 on Gulftown as well?
Last edited by bassplayer; 05-08-2011 at 03:17 PM.
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
Most of the Dominator GT 2000 C8 can`t do these Frequencies,in my Opinion(under normal conditions).In the last Threads often they were GTX2 or Dominator GT 2000 C7,OCZ Blade DDR3 7-8-7-20(Rams like these) they do DDR3-2200 7-7-6-x.
I think with l-u-c-k and much "Juice" it is possible with some Dominator GT 2000CL8 to get in these heights.
What do the "Pros" say?
Last edited by P@trick; 05-09-2011 at 08:35 AM.
I reckon it could be either but its more likely to be the ram.
it's likely your sticks cant handle it or it could be a combination of RAM, board, CPU and cooling
Agreed with the main points. My Super Talent Chromes didn't like to go much over 2050 7-7-6 on my 920 (pretty solid IMC), but that was probably the ram.
As for the SB systems running 2200+ with Hypers, those are, without a doubt, GTX2. I have yet to see an average binned set of Hypers run well on SB.
how much vdimm?
my hyper works 2100 7-7-6@1,82v :O
VDimm has been up and down. From 1.7V to 1.9V.
CPU isn't that cold, around -40C on phase. I'll have to keep messing around to see what I can do. I have a dominance here and I just wanted to get a grasp of these things before getting them cold.
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
Did some decent stuff today on phase. How's my efficiency?
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
those are flyin! vdimm? temp?
I was being a bit gratuitous. They're on air with some high airflow fans and Vdimm was 1.95V BIOS. I think I should freeze them before giving more though. I'm hoping for 2000+ 6-6-6!
I think I need to get wazza down first (this was without wazza and maxmem), but I can't get it to work. If my OS is C: and my Pi folder is on the root (C:\Super Pi), I should do C -> D (and maybe D -> C as that completes), correct? Does D need to be a different drive, or will a separate partition work?
Last edited by bassplayer; 05-11-2011 at 08:44 PM.
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
heheheh i'll try some corsairs too for that special comp @ ocn
latency speed and bw? nom nom nom :P
I don't get it. You had difficulties passing 1050MHz 7-7-6, but you can do 1010 6-7-6 no problems! These 2000 C8 are f-ing GOLD sirCan you do 950MHz 6-6-6?
It will boot but I haven't tried 32M yet.
Any thoughts on my wazza questions mentioned above? I think I'm doing it wring as I get no change no matter what file size I use
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
Nice oneOriginally Posted by bassplayer
That checksum is pretty evil or it's tellin ya to lower the trcd :p
DO IT
Last edited by El Gappo; 05-12-2011 at 11:03 AM.
My pot is bigger than your pot
WHAU!!!!
i still need to review the rules again...
hopefully my gt's imc can do high blck...
i wish the deadline was later than june1... i'd join all categories lol
there are definitely some nice kits of those 2000C8 Domis flying around.
I got also two kits, which are able to do 1000mhz 6-6-6-18. just costs some binning time or luck
What's your name on OCN?
i forgot im banned there... rofl
**my friend will submit my screenshots ..not sure if that complies with the rules...
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
If I could get dice on the weekends I'd be freezing stuff today. Alas, I cannot
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
As for the wazza issue if you dont want to spend time doing it manually search for OCX Spi Tweaker...easy, fast...simple just press a few buttons.
Smile
I've been trying OCX... I think I'm still doing it wrong lol
No difference regardless of Wazza size
i7 920 / X58A-OC / Dominator GT 2000 7-8-7 / 5870 Lightning
I mentioned it to Spec today, and he said use two drives... he wasn't sure about the "2nd drive" being a partition.
Open task manager...I've been trying OCX... I think I'm still doing it wrong lol
No difference regardless of Wazza size
Look at avail ram before you start. Then start wazza with a size between 800MB and 3GB...
Check the "IV" box because even though it takes 3 times longer and is more complex it will free up the most ram. I often run 1920 MB CDT-IV (Only IV checked) twice.
Using one hard drive frees and two partitions up the most ram. (At least in my case) You only need two partitions...if SuperPi is C: then D: E: F: should be chose for your second.
You can use two drives if you want though.
I want to find out how manual wazza works....
Smile
Posting Permissions
Reply With Quote
Bookmarks