1055T + 1090T testing have 890GX and 890FX 790FX testing..

[charged3800z24]

Ok, first up is the MSI and 1055T, no major tweaking. I did have an issues worth noting. The voltage maxes out @ 1.47 on this baord. may be the bios version also.
If you are looking for a 4ghz x6, the 1055T and the MSI890GX-G65 work well togther. still wish the MSI had BE Profile support for the OCZ modules, But it is a nice board.

specs
890GX-G65 Bios v1.6
Ht Ref - 300
Phenom II x6 1055T, CCBBE CB 1015DPMW, Turbo off, 4.05ghz 1.47v, 2700NB 1.35v
HD 5850, stock for CB 11.5, 1000core for 3d runs
CCC 10.4 Preview driver
H20 / room 22*C
OCZ 1600BE 8.8.8. 24 2T 1.65v
Skeleton Case 250mm Fan on high
Windows 7 Home Premium 64bit

CB 11.5 64bit


wPrime, 32 & 1024


WinRAR


Unigine bench (specs in SS)


3dmark06

[charged3800z24]

I swapped out the MSI 890FX for the Asus CH IV. I was able to get 200mhz more out of the CPU. I ran the test below. I need some more apps to bench.. any ideas?

Phenom II x6 1055t 4.2ghz 1.56v, 2700NB 1.35v, 300HT Ref,
Asus Cross Hair IV Bios 0801
OCZ 1600BE 2x2GB, 1600mhz, 8.8.8 24, 2t, 1.65v
Ambient water cooling
Antec Skeleton 250mm fan on high
750w Corsair Single Rail
HD 5850, 1000c - 1200m. Air, Single
Win 7 64bit

Cinebench 10 64bit



Cinebench 11.5 64bit



wPrime 32 & 1024



3dmarl06



Vantage

[charged3800z24]

Well, life is busy. I only had a few minutes to test tonight. So here are the results.
It seems the NB is better then my C3 965. I also finally broke 24000 on 3dmark06 with a single 5850. I will try some lightly chilled water (all can can do for now) this weekend. most likely Sunday.

Phenom II x6 1090t 4.2ghz 1.55v, 3000NB 1.5v
Asus Cross Hair IV Bios 0801
OCZ 1600BE 2x2GB, 1600mhz, 8.8.8 24, 2t, 1.65v
Ambient water cooling
Antec Skeleton 250mm fan on high
750w Corsair Single Rail
HD 5850, 1000c - 1200m. Air, Single
Win 7 64bit

Cinebench 10 64bit



Cinebench 11.5 64bit



wPrime 32 & 1024



3dmark 06



Vantage

[FlanK3r]

nice charged, its your board and new CPU, or only for minireview?With AOD or K10 stats can to not voltage up?

[charged3800z24]

Just a week review, then they move on. The Crosshair IV is mine though... And AOD is maxed at 1.47v also.
I'll be adding more here this evening.

[buff]

Can you give us a comparison of Crossfire in the 890gx vs 890fx?

[charged3800z24]

Can you give us a comparison of Crossfire in the 890gx vs 890fx?

I would love to, but I only have one 5850.... Something I should have invested in. Here is a pic up what happens when the UPS truck throws up at your house. I ahve to get this up and running fast and can do some test, but the deal was it has to do a bit of WCG for the rest of the week before becoming Adobe CS5 etc work station.

[theoldtimer]

Nice test results. All that tasty hardware on your plate If you have any left over send it to me

[charged3800z24]

4TB storage 2x2TB raid 0, + 750GB black drives. 600GB Velociraptor (waiting shipment). 16gb DDR3 1333. Phenom II 1090T + 1055T. GTX285 (for Adobe CS5). etc.. The Thermalright Ultra 120 Extreme is for 1366 Socket... but I made it work . Won't have to test tonight, gotta head to bed.

I used a old Athlon 64 FX heatsink's retension bracket.



System together...man the 950w PSU had a lot of cable..

[charged3800z24]

I updated post # 2 with CrossHair IV results and the 1055t

[FlanK3r]

can u, for me, testing LINX at 20 round? Size block about 16 000. Thx. What temps in load?

[Lastviking]

I updated post # 2 with CrossHair IV results and the 1055t

Any updates on the 1090T do it clocks beter than the 1055 or about same? or worse?

[charged3800z24]

can u, for me, testing LINX at 20 round? Size block about 16 000. Thx. What temps in load?

I'll give that a shot tonight or this weekend

Any updates on the 1090T do it clocks beter than the 1055 or about same? or worse?

I am swapping in the 1090t tonight.

[charged3800z24]

Hmm, I am like the only one posting in my thread
I updated post number 3

I will try to get more test in and see if I can get more out of the chip. I didn't have a whole lot of time tonight and just picked setting I thought would work.

[theoldtimer]

I'll pull mine off the chiller tomorrow and test it using room temp water if you like? I can post my results here to compare 790fx to 890fx if you want?

[charged3800z24]

I'll pull mine off the chiller tomorrow and test it using room temp water if you like? I can post my results here to compare 790fx to 890fx if you want?

Sounds good, I look forward to your results. I had better RAR speeds on the 890GX. I am getting low speeds consistantly. Not sure why. I don't know if it is something I am missing settings wise, and if it is causing other test to be lower. Everything looks ok though. I widh I had better RAM.