Praetor
» Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
» Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM
The Yamato
» Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
» Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »
jump bios 2 ??
GOOC 2010 FR: #2
Praetor
» Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
» Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM
The Yamato
» Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
» Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »
To answer the questions that were asked about PCI-E configuration.
I've installed the following on an R3E mobo:
#1 PCI-E GTX 480
#3 PCI-E GTX 480
#4 PCI-E X-Fi Titanium
Both GPU cards run in PCI-E 2.0 x16
X-Fi runs in PCI-E 1x
There's still a free PCI-E x4 slot available as well if you like to run another card. I think you might also be able to run the #2 PCI-E in x1 mode concurrently as well, but haven't confirmed that.
BTW, during idle the PCI-E 2.0 x16 GPUs will clock down and switch to PCI (1.x) x16 in order to save power.
Last edited by cx-ray; 06-21-2010 at 07:07 AM.
I have a problem the bios does not read the correct cpu temp at all.When booted into windows and i run pc probe it shows cpu temp like 38-40 c at idle which i know it cant be as i am watercooled.If u run a a program like everest ultimate it will read the same as pc probe because pc probe is running in the background.If u shut down pc probe and reboot pc and just run everest ultimate program u will see the correct cpu reading and its like 23c idle where as pc probe reads 38-40c.
Temperatures
Motherboard 33 °C (91 °F)
CPU 23 °C (73 °F)
CPU #1 / Core #1 25 °C (77 °F)
CPU #1 / Core #2 18 °C (64 °F)
CPU #1 / Core #3 24 °C (75 °F)
CPU #1 / Core #4 22 °C (72 °F)
CPU #1 / Core #5 30 °C (86 °F)
CPU #1 / Core #6 24 °C (75 °F)
North Bridge 53 °C (127 °F)
South Bridge 51 °C (124 °F)
GPU1: GPU 49 °C (120 °F)
GPU1: GPU Memory 41 °C (106 °F)
GPU1: GPU Ambient 44 °C (111 °F)
GPU1: GPU VRM 42 °C (108 °F)
GPU2: GPU 49 °C (120 °F)
GPU2: GPU Memory 41 °C (106 °F)
GPU2: GPU Ambient 44 °C (111 °F)
GPU2: GPU VRM 42 °C (108 °F)
Hitachi HDT725050VLA360 32 °C (90 °F)
Hitachi HDT725050VLA360 32 °C (90 °F)
Seagate ST31000333AS 30 °C (86 °F)
anyone else having this issue or could it be the 980x cpu config.
MB Name:Rampage III Extreme
BIOS Version : 0602
CPU Name :Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz
Memory information:CMG6GX3M3A2000C8 - 6GB (3x2GB) Corsair Dominator GT, DDR3 PC3-16000(2000), CAS 8-8-8-24, DHX, XMP, DF, 1.65V
OS information :Windows 7 Ultimate 64 Bit version
1200 watt psu tough power
2 280gtx sli
With my i7 930, I'm also water cooled and Im idleing at 38-40'C too, so does it mean I have a monitoring problem? Does it has something to do with TJ Max???
CPU Intel i7 3930k
Motherboard asus Rampage IV extreme with Koolance Block
Memory Corsair Dominator GT 2133 Ghz 16 GB
Graphics Card 3 x ATI Radeon HD 6970 with EK water block
Hard Drive (128 GB Crucial m4) (64 GB Patriot SSD) 1x1500GB
Sound Card Onboard
Power Supply Enermax Revolution 950 W
Case Corsair Obsidian 800D Modded
CPU cooling EK HF Supreme Full Nickel
GPU cooling EK water Block 6970
OS Windows 7 Ultimate x64
Can any of you help
I'm looking for a really good HSF that will fit the Rampage III Extreme and will not come in contact with the cooling fins on top of Corsair Dominator ram, plus be good for 4GHz.
I have been looking at a Noctua NH-D14 and the Titan TTC-NK85TZ/V2 Fenrir but they look as if they could clash.
What are all the coolers so far that fit the R3E and clear Dominator ram??
MB Name:Rampage III Extreme
BIOS Version : 0602
CPU Name :Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz
Memory information:CMG6GX3M3A2000C8 - 6GB (3x2GB) Corsair Dominator GT, DDR3 PC3-16000(2000), CAS 8-8-8-24, DHX, XMP, DF, 1.65V
OS information :Windows 7 Ultimate 64 Bit version
1200 watt psu tough power
2 280gtx sli
MB should start with no other components on it. It would just light the first Q LED indicating CPU problem.
There are no tests before PSU starts. It starts, then MB check, CPU, RAM, VGA...
There is one more thing you could try. Take latest BIOS, rename it to R3E.ROM, save it on USB stick, plug it in ROG connect USB port, hold ROG connect button until it flashes (as described in manual).
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
CPU Intel i7 3930k
Motherboard asus Rampage IV extreme with Koolance Block
Memory Corsair Dominator GT 2133 Ghz 16 GB
Graphics Card 3 x ATI Radeon HD 6970 with EK water block
Hard Drive (128 GB Crucial m4) (64 GB Patriot SSD) 1x1500GB
Sound Card Onboard
Power Supply Enermax Revolution 950 W
Case Corsair Obsidian 800D Modded
CPU cooling EK HF Supreme Full Nickel
GPU cooling EK water Block 6970
OS Windows 7 Ultimate x64
Last edited by Leeghoofd; 06-21-2010 at 12:25 PM.
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
My 980x idle temps rang from 20 to 33 C on the cores and 20 C is impossible when ambient temps are 25 and water temps are 30C( measured with Real temp, Core temp and Everest). Just forget idle temps and look at your load temps.
IIRC, there is one thing specific for Gulftown: when CPU is idle it slows down cores to almost a halt, so it shows incredible low temps (that contradicts laws of physics ).
unclewebb could back me up or correct me, as that is his field of knowledge.
EDIT:
That should be it: 33 idle, 20 halted.
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
4 cores halted ??
Idle temps 31-23-24-20-23-21-33
CPU @ 4,3 GHz, Vcore 1,33125 and QPI 1,34375.
Mem 1950 MHz CL 8
Last edited by Mydog; 06-21-2010 at 12:52 PM.
Reason I reported the temp problem is because I have seen it reach 65 in the bios and I ain't even booted into windows yet and every things at stock settings.
MB Name:Rampage III Extreme
BIOS Version : 0602
CPU Name :Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz
Memory information:CMG6GX3M3A2000C8 - 6GB (3x2GB) Corsair Dominator GT, DDR3 PC3-16000(2000), CAS 8-8-8-24, DHX, XMP, DF, 1.65V
OS information :Windows 7 Ultimate 64 Bit version
1200 watt psu tough power
2 280gtx sli
So here's a little mystery that I have uncovered. I have two HD 4870x2's and was running them in the #1 PCI-E slot/#3 PCI-E slot (for X16 each). A few days ago I noticed under CCC that the second HD4870x2 was showing a disabled adapter. I thought the card lost one GPU core ... I was very upset.
Today for grins and giggles, I switched the second HD4870x2 to the #2 PCI-E slot and all of sudden, there is the lost adapter!! I show all four adapters. Now, if I switch the second card back to the #3 PCI-E slot, and I loose an adapter (GPU core) good chance it could be a bad PCI-E slot, right? Sounds like an RMA to me, huh?
Any thoughts?
A number of us have reported intermittent CPU temp problems on the official forum. For me it's settled down and I haven't seen it for a while. There was time when it would report anything from a negative number up to 80C. And it would stick wherever it was until the next re-boot. Last I heard ASUS was looking at the BIOS settings to see if was a specific combination that was causing this.
So which bios is the best?
CPUID http://valid.canardpc.com/show_oc.php?id=484051
http://valid.canardpc.com/show_oc.php?id=484051
http://valid.canardpc.com/show_oc.php?id=554982
New DO Stepping http://valid.canardpc.com/show_oc.php?id=555012
4.8Ghz - http://valid.canardpc.com/show_oc.php?id=794165
Desk Build
FX8120 @ 4.6Ghz 24/7 / Asus Crosshair V /HD7970/ 8Gb (4x2Gb) Gskill 2133Mhz / Intel 320 160Gb OS Drive, WD 256GB Game Storage
W/C System
(CPU) Swiftech HD (GPU) EK HD7970 with backplate (RAM) MIPS Ram block (Rad/Pump) 3 x Thermochill 120.3 triple rads and Dual MCP355's with Heatkiller dual top and Cyberdruid Prism res / B*P/Koolance Compression Fittings and Quick Disconnects.
im using 0704 with my 980x. I like it, haven't noticed anything worse than 0534 thats for sure (which was also fine with me)
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Heh, my 4250 Mhz CPU = PC fail in video games, but 4209 Mhz is fine 24/7.
The great thing is that my board only needs 1.25v for 200 BCLK, and 1.43v for the ram at 1600 Mhz Cas 7 at T1. The bad thing is that the ram wont work at 2000 Mhz due to having 6 sticks regardless of having so much headroom, the highest it works at is 1800 Mhz Cas 8.
Bookmarks