I do not know if it includes the modifications of 0096 (and other 00xx)...
according to some, the 1102 bios requires less voltage than the 1005
I thought I see the opposite here...
I do not know if it includes the modifications of 0096 (and other 00xx)...
according to some, the 1102 bios requires less voltage than the 1005
I thought I see the opposite here...
Sorry for my english
LL A77F - Asus Rampage V Extreme - 5930K - Corsair Platinum 4x4Go 3000 C15 - Zotac 770 - SSD Samsung 850 Pro & 830
Pump D5 with mod Bitspower - EK Supremacy - Koolance GTX680 - HW Labs SR1 280 & EK XTX 360
PROUD|REX|E8600|2*1GB HYPER|9800GTX+ DK|on AIR
XOCT |RIIIBE|i7 920|3*2GB HYPER|4890 MATRIX|460W Enermax 3in1 24p|SyncMaster 940BF|on AIR
MEMBER|RIVBE|i7 4960X|4*2GB HYPER|GTX 470 SOC|1KW SilentPro|TV|Seidon 240|
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
^ have you tested any 3D with 221 bclk?
no no not tested anything yet im just happy to boot with 221
Apple MacBook Air
Apple IPad 2
Hi,guys ,
managed to get into the "4.5GHz Linx STable Club " over at XS but what worries me is the
inconsistent performance of this MB .
I got 2 R3E and both maxed up at 222BCLK W/O and 231-232 BCLK w the slowmode .
Tried 3 different CPUS on them , two kits of memory . Moreover, I have observed
the poor 3D performance around 220BCLK at Vantage as reported by Leeghoofd.
All those betas/alfas do not make it better, of course, as its HW /ICH related .
I deem this MB as overrated one for sure .
But well.. what can we expect these days- its just buy and sell, buy and sell as quickly as possible
SB 2500K@5GHZ@1,488 V Gigabyte P67AUD5
Mushkin Redline 1600 Patriot VIPER II 2000
ASUS GTX 580 OC @930
^I lost performance at 215bclk (as everyone is probably tired of hearing, but idc ). If someone could figure this issue out I would gladly go back to using the board because it has such a good layout.
seems to b ok here....
[IMG=http://img690.imageshack.us/img690/1184/testmsi.jpg][/IMG]
the problem i am facing is no matter what values i enter high or low the pc wont boot, i cant even get my cpu and board overclock to 4.0Ghz which is something was easy to do with my previous i7 930 and asus p6x58d premium, now since i got the asus R3E and the i7 980x i can even run anything other than the stock speed, my temp for the cput is 27c idel and i am using very good WC system !!
the issue exactlly is. after entering the values i get blank screen ( PC doesnt post ) .. even if i dont overclock the cpu and only try the RAM at it is rated freqency it doesnt post, please give me some feed back and help i will appreciate that alot
Some 980X don't like high uncore, high QPI voltages... what settings are you trying to run ? which bios ?
I'm still on 0704, have't had time to test all this stuff out. Thing is I mentioned it too in the review, that the biosses get mixed up by the end user. A bios for a bencher is not the same as one for a daily cruncher... Asus should make it clear which bios serves which purpose (like in the DFI days)
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Yeah... I miss DFI/DFI street days...
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
[QUOTE=Leeghoofd;4633519]Some 980X don't like high uncore, high QPI voltages... what settings are you trying to run ? which bios ?
i used both 105 and the latest 1102 ? i tried several settings
20x200 / vcore 1.28v / qpi 130 to 135v / DRAM Bus 1.64v - to 16525v / Ram freq i tried 1450, 1550, 1600 all didnt work ... LLC enabled and disabled didnt work
i also tried different multipliers by BCLK to get the 4.0Ghz it didnt work !!
should i restore the original BIOS ? (9xx)
i just dont understand i was easily and comfortably moving from stock to 3.8Ghz ti 4.0Ghz to 4.2Ghz with my previous build !!
Last edited by nightwoodwolf; 11-18-2010 at 02:48 PM.
I don't have another tool and I don't even know of one actually.
It only happens to me when I make changes using Turbo-V and save the changes. What I have found is that Turbo-V gives me wrong DRAM Ref voltages and so when I apply settings, Turbo-V applies the wrong DRAM Ref voltages. The only way I can get the DRAM Ref voltages right is by adjusting them in the bios and not changing any settings using Turbo-V. It doesn't happen to me every time though, its a bit random.
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
load line calibration, it "stabilizes" your qpi voltage droop
PROUD|REX|E8600|2*1GB HYPER|9800GTX+ DK|on AIR
XOCT |RIIIBE|i7 920|3*2GB HYPER|4890 MATRIX|460W Enermax 3in1 24p|SyncMaster 940BF|on AIR
MEMBER|RIVBE|i7 4960X|4*2GB HYPER|GTX 470 SOC|1KW SilentPro|TV|Seidon 240|
http://valid.canardpc.com/show_oc.php?id=1491825
And uhhh, 1.46 vCore, QPI Slowmode, 1.45 CPU PLL, 1.40 QPI.
http://valid.canardpc.com/show_oc.php?id=1491825 - 232 Bclk Too lazy to take screenshot. Dunno if 3D stable :P All on water, no Ln2 Crazyness haha
Last edited by Cookiesowns; 11-19-2010 at 11:32 AM.
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
I am little curious more than anything else but have there been a couple of reversions of this board yet? If so, what have been the changes?
i know about two revisions 1.04G and 2.0xx, i have rev 1 and its piece of crap a wrote a lot of problems about here, if your getting one choose the newest revision availableor dont get it at all
Thanks.
I have seen 1.04G but haven't seen any 2.0xx
Would anyone know the differences?
PROUD|REX|E8600|2*1GB HYPER|9800GTX+ DK|on AIR
XOCT |RIIIBE|i7 920|3*2GB HYPER|4890 MATRIX|460W Enermax 3in1 24p|SyncMaster 940BF|on AIR
MEMBER|RIVBE|i7 4960X|4*2GB HYPER|GTX 470 SOC|1KW SilentPro|TV|Seidon 240|
So rev 1 and 1.04g?
Hey guys, been running prime95 for 6 hours with these settings, guess i am gonna keep it for my 24/7 ... next weekend gonna try to push the RAM further hopefully without upping the voltage much.
Bookmarks