X6 1035T @ 200x15.5, 8GB Memory @ 1600MHz, Post 1 Of 2
A quick test at mostly stock settings to get a feel for the board. As the screenshots show I am able to manually lock in the Turbo multipliers in the BIOS. I'm not sure if this is because of the chip or the board/BIOS is allowing it. I have asked for clarification and will post the info when I receive it.
ASUS 4A89TD Pro, 0502 BIOS
Phenom II X6 1035T
4x2GB OCZ Platinum AMD Edition (OCZ3P1600LVAM4GK) PC3-12800 1600MHz 7-7-7-24
200x15.5, Memory @ 1600MHz 7-7-7-24
OCZ 100GB Vertex LE100
SAPPHIRE 4870x2, 4870 Trifire
OCZ Z Series 850W
click for larger image
click for larger image
click for larger image
click for larger imageCode:Configure System Performance Settings ---------------------------------------------------------- Target CPU Frequency:. 3100MHz Target DRAM Frequency: 1600MHz CPU Level Up......................[Auto] OC Tuner Utility AI Overclock Tuner ..................[Auto] CPU Ratio............................[15.5] CPB Control..........................[Disabled] DRAM Frequency.......................[1600MHz] CPU/NB Frequency.....................[Auto] HT Link Speed........................[Auto] > DRAM Timing Configuration > DRAM Driving Configuration ************* Please key in numbers directly! ************* CPU & NB Voltage Mode................[Offset] CPU Offset Voltage.................1.284 [Auto] CPU/NB Offset Sign.................[+] CPU/NB Offset Voltage..............1.225 [0.075000] CPU VDDA Voltage.....................2.496 [Auto] DRAM Voltage.........................1.643 [1.65000] HT Voltage...........................1.196 [Auto] NB Voltage...........................1.096 [Auto] NB 1.8V Voltage......................1.800 [Auto] SB Voltage...........................1.100 [Auto] ********************************************************** CPU Load-Line Calibration............[Auto] CPU/NB Load-Line Calibration.........[Auto] CPU Spread Spectrum..................[Disabled] PCIE Spread Spectrum.................[Disabled] DRAM Timing Configuration DRAM CAS# Latency....................7 [7 CLK] DRAM RAS# to CAS# Delay..............7 [7 CLK] DRAM RAS# PRE Time...................7 [7 CLK] DRAM RAS# ACT Time..................24 [24 CLK] DRAM READ to PRE Time................6 [Auto] DRAM Row Cycle Time.................31 [31 CLK] DRAM WRITE Recovery Time............12 [Auto] DRAM RAS# to RAS# Delay..............6 [Auto] DRAM READ To WRITE Delay.............6 [Auto] DRAM WRITE To READ Delay(DD).........2 [Auto] DRAM WRITE To READ Delay(SD).........6 [Auto] DRAM WRITE To WRITE Timing...........4 [Auto] DRAM READ To READ Timing.............4 [Auto] DRAM REF Cycle Time................110 [Auto] DRAM Refresh Rate..................7.8 [Auto] DRAM Command Rate...................1T [1T] DRAM Driving Configuration DCTO Information: CKE drive strength..................2X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength.............2X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength..............1.25X [Auto] DQS drive strength...............1.25X [Auto] Processor ODT...................60ohms [Auto] DCTO Information: CKE drive strength..................2X [Auto] CS/ODT drive strength.............1.5X [Auto] ADDR/CMD drive strength.............2X [Auto] MEMCLK drive strength.............1.5X [Auto] Data drive strength..............1.25X [Auto] DQS drive strength...............1.25X [Auto] Processor ODT...................60ohms [Auto] CPU Configuration AGESA Version 3.7.0.0 ---------------------------------------------------------- AMD Phenom(tm) II X6 1037T Processor Revision: E0 Cache L1: 768KB Cache L2: 3072KB Cache L3: 6MB Speed : 3100MHz uCode Patch Level: 0x10000BF ---------------------------------------------------------- Microcode Updation..................[Enabled] Secure Virtual Machine Mode.........[Enabled] Cool'n'Quite........................[Enabled] C1E Support.........................[Enabled] ASUS Core Unlocker..................[Disabled] CPU Core Activation.................[Auto] DRAM Controller Configuration ---------------------------------------------------------- Channel Interleaving................[Auto] MemClk Tristate C3/ATLVID...........[Disabled] Memory Hole Remapping...............[Enabled] DCT Unganged Mode...................[Always] Power Down Enable...................[Disabled]
click for larger image
Reply With Quote
Originally Posted by prznar1
? 
here is result
somebody should repair this problem
Bookmarks