Im very very happy that you are making another QF board.
Now make please QF with 2x 1366 and I will be happy. Black and red colors prefered.
Im very very happy that you are making another QF board.
Now make please QF with 2x 1366 and I will be happy. Black and red colors prefered.
i7 930 D0 - 4,2 GHz + Megashadow
3x4GB Crucial 1600MHz CL8
Foxconn Bloodrage rev. 1.1 - P09
MSI HAWK N760
Crucial M500 240GB SSD
SeaGate ES.2 1TB + 1TB External SeaGate
Corsair HX 850W (its GOLD man!)
ASUS STX + Sennheiser HD 555 (tape mod)
Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr
what about flaming blade i tried g21 and it behaved same as p09 so i tried some older bios to test flashed p03 and now mobo won't boot with any graphics card like my radeon 4850 or any amount of ram, the fans don't even speed up and the display doesn't turn on and the code is 01. So now my mobo is a brick resetting cmos does nothing!
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
did you have to reset cmos and then load optmized defaults ?
any clue on how to fix the 01 problem ?
EDIT: used spi flasher and flashed bios chip with it, with P06 bios i used forever, now boots fine
notice to anyone: DO NOT FLASH P03 UNLESS YOU WANT A BRICKED BOARD
EDIT2: G21 working with Fermi properly, what i had to do, was reset CMOS, then mash DEL like mad, once you are in BIOS, load optimized defaults, Y, save and exit, Y, now you can configure your BIOS however you like, and Fermi will work properly
Last edited by rajkosto; 07-14-2010 at 02:47 AM.
Loading Optimized Defaults is something I have to do at any Bios Update, no exceptions just every time.. Good for you that it all worked out in the end, and keep doing what you did now, and you'll be safe at every flash. I bet you lost a few pounds of weight off your shoulders when it booted and started loading windows
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
I finished finally with GTX 470 SLI. Flawless.
Foxconn BloodRAGE GTI|i7 920(200x21)|6GB Kingston HyperX 1866 CL9(1600 6-7-6)|GTX 470 SLI|WD300HLFS|CM Silent Pro M850
AsRock X58 Extreme3|i7 920(212x19)|6GB Kingston HyperX 1866 CL9(1700 7-7-7)|GTX 460 768 MB|WD300HLFS|Audigy|Chieftec CFT-650-14C
AsRock P67 Extreme4|i7-2500K(45x100)|2x2 HyperX Genesis 1600(1866 9-10-9)|2xGTX 460 768 MB|RAID1 2x1TB Т7K1000.C + WD6401AALS|CM Silent Pro 600
I was never able to get my GTX 470 sli setup working perfectly. Had to many issues so I stepped up one card to a 480 am selling the other 470 to beef up my water loop so i can add the 480 to it. This why i'll just mod and oc it to high hell
Hi masters
i have flaming blade gti and i bought gksill 3*4gb =12gb , after assembling them i get E4 error also i tested all bios ver. that www.quantum-force.net or foxconnsupport.com rlzd but still is there(E4)
also i check all moduleS separate or 2 DIMM without any problem .
do you have any suggession or NEW BIOS OR ...?
sorry for my bad grammer.
thanks in advance
contact gskill and ask them what timings to use.
its more their job to get their memory working on different boards than board makers...
sure, board makers are also responsible for it, but its mostly the mem maker... and they tend to know more on how to make it work.
Bookmarks