Page 1 of 2 12 LastLast
Results 1 to 25 of 36

Thread: My first subzero bench session

  1. #1
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035

    My first subzero bench session

    I did my first subzero cooling bench session tonight.

    Used dry ice and acetone (should be around -78*C). I had no temp probe, but as expected I didn't run into any CB/CBB issues. BIOS went down to -60*C and stayed there whenever I checked, no idea what load temps were. I left the ram and tRD at safe settings, didn't want any uninvited lockups while I was trying to figure out how the CPU behaved.

    Nothing special results wise, the CPU is not a great one and I'm a complete novice, but I had lots of fun.


    SPI 1M | 5.799 GHz | 7.985sec (cracked 8 seconds finally)




    SPI 32M | 5.70 GHz | 8m 27.750s




    AQM3 | 5.799 GHz | 342 138




    3D Mark 2001 | 5.699 GHz | 104 509 Marks | 17th GTX285




    3D Mark 2003 | 5.70 GHz | 73 357 Marks | 10th GTX285




    3D Mark 2005 | 5.70 GHz | 34 485 Marks




    CPU-Z @ 5.9 GHz





    That's all for this session. Thanks for looking.

  2. #2
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Nice work CryptiK!

    Good to see someone running 01 again!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  3. #3
    Xtreme Member
    Join Date
    May 2009
    Location
    Krypton, Hawaii
    Posts
    363
    Nice 01 shot Cryptik

    Good clocks for DICE, I bet yah had a blast running sub-zero

  4. #4
    Xtreme Addict
    Join Date
    Nov 2007
    Location
    Toronto, Canada
    Posts
    1,938
    congrats man, very nice 01 stuff there. Once you have that first cold session you get hooked!
    GB 790XTA UD4
    GSkill Pi Black 2000 Cas9
    ASUS 4870
    Enermax Revolution 1050+





    http://www.heatware.com/eval.php?id=67661

  5. #5
    Xtreme Member
    Join Date
    May 2009
    Location
    Krypton, Hawaii
    Posts
    363
    P.S. you forgot the frosty hw pron pics

  6. #6
    Xtremely Addicted
    Join Date
    Dec 2004
    Location
    NL
    Posts
    2,471
    Congrats mate, from now on things wil only get colder

  7. #7
    Never go full retard
    Join Date
    Feb 2008
    Location
    Vegas
    Posts
    3,984
    Congrats, and yes the addiction only gets worse.

  8. #8
    I am Xtreme
    Join Date
    Aug 2008
    Posts
    5,586
    wooohooooo welcome to the subzero land

    you'll definitely do some hwbot damage


  9. #9
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,421
    Very nice CryptiK! Good to see the good old Rampage Extreme still not ready to retire. REX+8600+D9GTR must be the most legendary benching setup ever!
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  10. #10
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Nice stuff man Thanks for sharing
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  11. #11
    Registered User
    Join Date
    Jan 2010
    Location
    six feet under
    Posts
    85
    congrats
    nice run on dice

  12. #12
    Xtreme Member
    Join Date
    Aug 2007
    Location
    UK
    Posts
    247
    Very good well done Now it gets addictive

  13. #13
    Xtreme Enthusiast
    Join Date
    Jul 2008
    Location
    Prestonsburg, KY
    Posts
    545
    Nice scores man! Once you go sub-zero everything else is boring


  14. #14
    Xtreme Addict
    Join Date
    Mar 2009
    Posts
    1,233
    thats a good first one

    BTTB - Gigabyte Z87X-OC - WCed I7 4770k - 2x8gb Ballistix 1600mhz - Zotac GTX 780
    Asus Xonar Pheobus - OS -> Toshiba Q 256gb - Games -> 2x Agility 4 256gb Raid0
    Corsair HX850 - Tecnofront HWD BenchTable - Asus VE278Q 5760x1080

    Serveur - Asus Z77m PRO - 2500K - NH-C12P - 4x4gb G.Skill Ares 1600mhz
    Agility 4 128gb - Corsair CX430M - 1TB Black - 2TB green - 2TB Red

    KatPat - Gigabyte 990FXA-UD3 - FX-8320 - PH-TC14CS - 2x4gb Viper 1600mhz - GTS 450
    Samsung Evo 120gb - Corsair HX750 - Bitfenix Survivor White - Asus VE247H

  15. #15
    Xtreme Addict
    Join Date
    Aug 2007
    Location
    Greece
    Posts
    1,692
    May all your overclocking endeavors go as smooth as this one! Keep it up man!

    Quote Originally Posted by Don_Dan View Post
    Good to see someone running 01 again!
    2k1 NEVAH dies

  16. #16
    Xtreme Cruncher
    Join Date
    Jun 2008
    Location
    pacific NW usa
    Posts
    2,764
    CryptiK,very nicely done.i got to try some sub zero action some day.
    _________________________________________________
    ............................ImAcOmPuTeRsPoNgE............................
    [SIGPIC][/SIGPIC]

    MY HEATWARE 76-0-0

  17. #17
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Quote Originally Posted by Don_Dan View Post
    Nice work CryptiK!

    Good to see someone running 01 again!
    Thanks I love 01, and always wanted to break 100K with this card.

    Quote Originally Posted by Kal-EL View Post
    Nice 01 shot Cryptik

    Good clocks for DICE, I bet yah had a blast running sub-zero
    Thanks I wasn't sure what kind of clocks to expect on DICE, but it was great fun.

    Quote Originally Posted by ReverendMaynard View Post
    congrats man, very nice 01 stuff there. Once you have that first cold session you get hooked!
    Thanks Yeah I'm already contemplating the next session. Hopefully I can get hold of a dewar and some LN2 soon. I have a good CPU lined up too.

    Quote Originally Posted by Kal-EL View Post
    P.S. you forgot the frosty hw pron pics
    Ah yes, I will add a couple at the end of this post

    Quote Originally Posted by Viss View Post
    Congrats mate, from now on things wil only get colder
    Thanks Yeah I might have another DICE session, to get some more practice but LN is on the cards in the future.

    Quote Originally Posted by skinnee View Post
    Congrats, and yes the addiction only gets worse.
    Thanks I thought it may have peaked, but apparently not hehe.

    Quote Originally Posted by Hondacity View Post
    wooohooooo welcome to the subzero land

    you'll definitely do some hwbot damage
    Thanks I hope I can get some good points in the future, but this is a great learning platform for me at the moment.

    Quote Originally Posted by Zeus View Post
    Very nice CryptiK! Good to see the good old Rampage Extreme still not ready to retire. REX+8600+D9GTR must be the most legendary benching setup ever!
    Thanks mate, yeah it's a fun combo for sure. The Ballistix I'm using are GTS, sadly not as good as some GTR sticks out there (either that or the REX doesn't play nice with them) but great fun nonetheless. Wish I had a kit like your old Diablos.

    Quote Originally Posted by miahallen View Post
    Nice stuff man Thanks for sharing
    Thankyou, I've got some real inspirational people to look up to on this forum for sure

    Quote Originally Posted by siavash_shojaee View Post
    congrats
    nice run on dice
    Thanks

    Quote Originally Posted by scooter.jay View Post
    Very good well done Now it gets addictive
    Thankyou I thought it was already addictive, I can't imagine how much worse it's going to get!

    Quote Originally Posted by chuchnit View Post
    Nice scores man! Once you go sub-zero everything else is boring
    Thanks It was a lot of fun that's or sure.

    Quote Originally Posted by Boulard83 View Post
    thats a good first one

    Cheers

    Quote Originally Posted by George_o/c View Post
    May all your overclocking endeavors go as smooth as this one! Keep it up man!

    2k1 NEVAH dies
    Thanks man I think things are going to be much more tricky on LN2, but I didn't have any condensation or insulation issues, which initially was my biggest concern. Hopefully it holds up under real cold.

    Quote Originally Posted by radaja View Post
    CryptiK,very nicely done.i got to try some sub zero action some day.
    Thanks mate It really good fun, I'm glad I finally did it. If you can you should



    Pics:

    BIOS temps




    Frosty pics



    Last edited by CryptiK; 04-16-2010 at 06:51 PM.

  18. #18
    Xtreme XIP
    Join Date
    Jun 2007
    Location
    Puerto Rico
    Posts
    1,559

    Thumbs up

    Great going my good old friend , finally you got bit by the bug , once you go subsero you will never go back , good start Bro. May the subsero Force be with you.


    Regards: Angelo.

  19. #19
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Quote Originally Posted by chispy View Post
    Great going my good old friend , finally you got bit by the bug , once you go subsero you will never go back , good start Bro. May the subsero Force be with you.


    Regards: Angelo.
    Thanks Angelo, yeah I finally took the plunge. It really is a lot of fun, I can see why you guys like it so much

  20. #20
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Good start! And nice clock for DICE ....
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  21. #21
    Xtreme Enthusiast
    Join Date
    Mar 2008
    Location
    Wherever I may roam
    Posts
    678
    Nice runs for dice and well done!! Welcome to the COOL CLUB!!
    ____________________________________________

    More & more very expensive, quickly obsolete parts!!

  22. #22
    Xtreme Member
    Join Date
    Mar 2008
    Posts
    278
    Nice benchie
    Hopefully i will do this soon,pot is here but no mounting/insulation material...............
    Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
    Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed

    Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
    9.204's PI

  23. #23
    Xtreme Addict
    Join Date
    Oct 2006
    Location
    new jersey
    Posts
    1,100
    you did good man.now it will never be the same when you bench air,if you even want to.
    _________________

  24. #24
    I am Xtreme
    Join Date
    Dec 2008
    Location
    France
    Posts
    9,060
    Great results! Hope you had a lot of fun!
    Donate to XS forums
    Quote Originally Posted by jayhall0315 View Post
    If you are really extreme, you never let informed facts or the scientific method hold you back from your journey to the wrong answer.

  25. #25
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Quote Originally Posted by TinTin View Post
    Good start! And nice clock for DICE ....
    Thanks

    Quote Originally Posted by Expat GriZ View Post
    Nice runs for dice and well done!! Welcome to the COOL CLUB!!
    Thanks, nice to be here

    Quote Originally Posted by OC4/3 View Post
    Nice benchie
    Hopefully i will do this soon,pot is here but no mounting/insulation material...............
    Thankyou You should do it if you can, it's a lot of fun. Took me awhile to get around to it but I'm glad I did.

    Quote Originally Posted by cowie View Post
    you did good man.now it will never be the same when you bench air,if you even want to.
    Thanks mate Yeah it changes the perspective on things huh.

    Quote Originally Posted by zalbard View Post
    Great results! Hope you had a lot of fun!
    Thanks, I sure did!


    I had a bit of DICE left, so I re-ran a couple of things and managed to improve a couple of scores.

    3D Mark 01: 104 724




    3D Mark 05: 34 572




    SPI32M: 8m 16.594s




    Everest bandwidth at same settings as SPI32M run:

    Last edited by CryptiK; 04-17-2010 at 07:00 AM.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •