X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 5 of 23 FirstFirst ... 234567815 ... LastLast
Results 101 to 125 of 558

Thread: The Obsidian 800D thread :D

  1. #101
    Registered User
    Join Date
    Jun 2010
    Posts
    51
    Quote Originally Posted by Piggy1918 View Post
    For the 800D owners, do you think you can fit a 140 single rad on the 140mm fan in the bottom easily? I know you can remove the cage and put in a double, but I am curious to see if you can fit the 140 rad w/o mods.
    +1

  2. #102
    Registered User
    Join Date
    Aug 2009
    Posts
    11
    Quote Originally Posted by Dark-Energy View Post
    That looks really nice, huRRi, I wish I had the money to create a setup like that nevermind the amount of effort that is needed I always envy those with heavily overclocked i7s and 2 oced 5870s in a water loop, it's common to see these setups with the same exact parts on XS especially with the 800D, but not ones that are as colorful as this

    This actually gives me some ideas on what colors I would prefer, I thought that going with the standard blue would look great but now I think orange/UV looks a lot better
    Thanks a lot

  3. #103
    Registered User
    Join Date
    May 2010
    Location
    Japan
    Posts
    7
    my 800d
    It changes PSU into placing vertically.



    i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D

    Water
    ・Pump MCP-355×2  ・GPU EK FC5870-NK
    ・CPU HEATKILLER Rev3.0 Limited
    ・Rad XSPC RX480×2 &RX240
    ・Tube Tygon R3603 &PrimoChill
    ・Ram Mips base custom. Made in Japan

  4. #104
    Xtreme Member
    Join Date
    Dec 2009
    Location
    Newcastle upon Tyne (UK)
    Posts
    189
    Can you post some pics of where and how the psu is mounted please ?

    Sick build btw

  5. #105
    Registered User
    Join Date
    May 2010
    Location
    Japan
    Posts
    7
    Hi zigzag
    PSU is stored when putting a 15~20 mm spacer in the leg.

    It is such a feeling.




    i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D

    Water
    ・Pump MCP-355×2  ・GPU EK FC5870-NK
    ・CPU HEATKILLER Rev3.0 Limited
    ・Rad XSPC RX480×2 &RX240
    ・Tube Tygon R3603 &PrimoChill
    ・Ram Mips base custom. Made in Japan

  6. #106
    Registered User
    Join Date
    Jun 2010
    Location
    Montreal, QC
    Posts
    13
    Impressive work WhiteSky

  7. #107
    Quote Originally Posted by WhiteSky View Post
    Hi zigzag
    PSU is stored when putting a 15~20 mm spacer in the leg.

    It is such a feeling.




    amazing stuff

  8. #108
    Xtreme Design
    Join Date
    Aug 2009
    Location
    Central Texas
    Posts
    469
    Agreed, that is badass.
    -------------------------------
    Not From Concentrate
    All Projects
    Previous Projects:
    S3 Mini ITX Chassis
    The ArK
    Uriel
    Israfel
    Veritas
    Eldritch

  9. #109
    Registered User
    Join Date
    Jun 2010
    Posts
    15
    Wow, awesome setup whitesky. More pics please!

    That is the first time I've seen that done in an 800D, it looks great and packs a huge punch as well.

  10. #110
    Registered User
    Join Date
    May 2010
    Location
    Japan
    Posts
    7
    Thank you for the comment.
    To be is the photograph of the remainder.

    On the power



    The side panel is 5 mm acrylic fiber and the honeycomb meshes of it.



    The cover of the power used [ Lian Li Power Supply Bracket].

    i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D

    Water
    ・Pump MCP-355×2  ・GPU EK FC5870-NK
    ・CPU HEATKILLER Rev3.0 Limited
    ・Rad XSPC RX480×2 &RX240
    ・Tube Tygon R3603 &PrimoChill
    ・Ram Mips base custom. Made in Japan

  11. #111
    Xtreme Member
    Join Date
    Dec 2009
    Location
    Newcastle upon Tyne (UK)
    Posts
    189
    Clever work on the psu mount, ingenious really

  12. #112
    Xtreme Guru
    Join Date
    Jun 2010
    Location
    In the Land down -under-
    Posts
    4,439
    wow dude nice build, never knew u could put a 480 on the bottom of the 800D, so it can fit 2x 480s... WoW! Mind taking more pics of the inside like res, pumps etc? hehe.

    Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?

  13. #113
    Xtreme Member
    Join Date
    Nov 2008
    Posts
    271
    Ingenious WhiteSky :thumbsup:
    Cooler Master ATCS 840 Silver Water Cooled || Vista x64 || Corsair HX1000
    Swiftech MCR320 || MCP355 /w XSPC ResTop || Swiftech GTZ || 1/2" ID x 3/4" OD Duralene Tubing
    Q9550@3.7Ghz, E0, 1.215 VID || Asus Rampage, 1.25 vCore, 1.29 NB, 1.32 VTT ||XFX 4870x2
    Dell 3007WFP-HC || 2x Dell 2007WFP || 4GB(2x2GB) Mushkin DDR2 6400 800MHZ ram at 4-4-4-12-2T
    ATH-A900/Z-2300s || FiiO E5 Amp || G15 Rev 1 || G7 || Logitech 9000 Quickcam || Salar M8 Microphone
    6401AALS WD Caviar Black || 400GB Seagate || 500GB Seagate || 250 Seagate
    White MSI Wind U100 2GB Ram || Windows 7

  14. #114
    very nice build i have to say

  15. #115
    Registered User
    Join Date
    May 2010
    Posts
    5
    WhiteSky - Your side panels have internal honeycomb structure? Looks really nice and clean, could you provide more details of how you put together this build? Excellent work!

  16. #116
    Xtreme Member
    Join Date
    Jun 2008
    Location
    Sweden
    Posts
    168
    Updated With Q-SLI , BTW temps are high so moar rads are needed



    i7 980X | EVGA X58 Classified | 6 GB Corsair Dominator GT 2GHZ | 3-Way SLI GTX580| 2.5 TB Hdd | Corsair Obsidian 800D| Corsair AX1200W | Custom WC


    Obsidian 800D Thread



    AKA Arne-Mohammed and X-Force


    sorry for bad English, I´m from Sweden

  17. #117
    Registered User
    Join Date
    May 2010
    Location
    Japan
    Posts
    7
    Hello, it is Ogge swe. It is a good thread.
    I, too, enjoy in this thread.Thanking you.

    Thanking of you, the comment to be glad about you

    hello.WarlockSix
    The remodeling of a case is simple. It puts a few photographs beforehand.


    1.It decides the position to cut. 2.It cuts the board of the base, leaving the four corners.


    3.It put a 1 mm Steelboard after cutting and it fixed it. 4.It makes the spacer of the 20 mm leg, too.


    5.It cuts a red line in the completing.
    6.The used meshes are this[ModRight ModMesh 480mm x 480mm x 1.0mm HEX Aluminum Mesh Panel - Black]


    It uses and it is pouring two fittings for D/D-SLI.
    i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D

    Water
    ・Pump MCP-355×2  ・GPU EK FC5870-NK
    ・CPU HEATKILLER Rev3.0 Limited
    ・Rad XSPC RX480×2 &RX240
    ・Tube Tygon R3603 &PrimoChill
    ・Ram Mips base custom. Made in Japan

  18. #118
    Registered User
    Join Date
    May 2010
    Posts
    5
    WhiteSky -

    Thanks for the details, that is a very clean well done build.

  19. #119
    Xtreme Member
    Join Date
    Aug 2005
    Location
    Orlando
    Posts
    143

    Talking


    Mac os 10.6.4 mod







    This my new RIG Boreas II mod

    Rampage III Extreme
    Corsair 800D Case mod w/Boreas chiller
    i7-980x 4.5ghz 145x31 1.36v/mem GT 2023mhz@8.8.8.22.98 T1 1.63v
    SSD 2x40GB raid 0/ raptor 150GB-10RPM/750GB data drive
    SAPPHIRE ATI HD5970 Hemlock 2GB OC@850/1200/1.100v
    Boreas Chiller, WaterCooling . PSU ABS 1100w
    CPU Block /EK-Supreme HF High Flow - Highest Performance CPU Water Block - Nickel
    Chipset Block Koolance xtreme both
    GPU EK-FC5970 copper
    my video on my mod when i first started=>http://www.youtube.com/watch?v=8O41h2QM-PQ


    --------------------------------------------------
    my 3Dmark06 34215

  20. #120
    Xtreme Member
    Join Date
    May 2010
    Posts
    154
    Whitesky, where, or how did you get that side panel? If you made it, would you consider making another and selling it?? Or was it easy to make.

    Thanks

  21. #121
    Registered User
    Join Date
    May 2010
    Location
    Japan
    Posts
    7
    hi Monkeyface
    It is selling a side panel here.
    CORSAIR Online Store→https://shop.corsair.com/store/item_...spx?id=1171683

    Later, it is completion if searching for the factory to cut.
    i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D

    Water
    ・Pump MCP-355×2  ・GPU EK FC5870-NK
    ・CPU HEATKILLER Rev3.0 Limited
    ・Rad XSPC RX480×2 &RX240
    ・Tube Tygon R3603 &PrimoChill
    ・Ram Mips base custom. Made in Japan

  22. #122
    Xtreme Member
    Join Date
    May 2010
    Posts
    154
    Ok, so I buy that, then cut out the size for the plexi, put that in, then cut the area for the RAD?? How would I install the window?

    Is this the window? http://www.performance-pcs.com/catal...ducts_id=24897

    Then how do I make it stay?
    Last edited by Monkeyface; 07-23-2010 at 06:03 PM.

  23. #123
    Xtreme Member
    Join Date
    Nov 2006
    Posts
    488
    Yup, I'd like to know too! On the other hand I just got my case and was thinking that if you put the rad on the other side of the case, then you just need to cut an opening in the side without the window. This would be pretty easy to cover with a good grill. You wouldn't have to worry about cutting two holes.

    A couple of comments about this case: It's too bad corsair didn't extend the hole pattern at the bottom, the whole length of the case. As one can see it is almost good enough for another 3 fan rad. In fact, if they had made the case 1/4" longer then one could have the triple rad and power supply mounted down there also. Even more, one more slot opening and 1/4" would allow an SR-2 in there!

    I find the side cover for the fan on the swappable hard drive cage kind of poorly designed. It seems to just hang from the right side and the upper clasp. I think if could rattle easily there. Anyone else notice this? Am I missing something that should support it from below?

    Thanks

  24. #124
    Xtreme Member
    Join Date
    Mar 2009
    Location
    Brazil
    Posts
    131
    Here is my rig:













    i7 3930k + Koolance CPU-370 + MCP35X + Black Ice GTX360 + Hailea HC-500A + Alphacool VPP655 || Asus Rampage IV Black Edition + EK-FB Asus R4BE || 4 x4GB Corsair Dominator Platinum 2400C9 || 4x Sapphire HD 7970 OC + Koolance VID-AR797 + RP-452X2 + 2x MCP655-B + 2x Black Ice GTX360 || SSD OCZ Vertex 3 240GB + Agility 3 60GB + WD Caviar Black 2TB + WD VelociRaptor 300GB + 2x Seagate 1.5TB 32MB + Seagate 3TB || 2x Corsair AX1200W || Logitech Z-5500 + G13 + G500s + G930 || Mountain Mods Extended Ascension || Dell U2711 27"

  25. #125
    Xtreme Member
    Join Date
    Apr 2010
    Location
    KU
    Posts
    178
    Heres mine atm:



    I'll have it back together in a month or so lol
    Mah Rig:

    i7 970 @ 4.4Ghz
    6GB Gelid Perfect Storm
    Gigabyte UD5 Rev 2
    128GB Corsair Nova SSD
    Evga 470
    Corsair Obsidian 800D
    Corsair 1KW HX
    Custom Liquid Cooling:
    PA 120.4
    EK Supreme HF
    Aquacomputer 470 block
    Swiftech M35x w/top

Page 5 of 23 FirstFirst ... 234567815 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •