my 800d
It changes PSU into placing vertically.
i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D
Water
・Pump MCP-355×2 ・GPU EK FC5870-NK
・CPU HEATKILLER Rev3.0 Limited
・Rad XSPC RX480×2 &RX240
・Tube Tygon R3603 &PrimoChill
・Ram Mips base custom. Made in Japan
Can you post some pics of where and how the psu is mounted please ?
Sick build btw
Hi zigzag
PSU is stored when putting a 15~20 mm spacer in the leg.
It is such a feeling.
i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D
Water
・Pump MCP-355×2 ・GPU EK FC5870-NK
・CPU HEATKILLER Rev3.0 Limited
・Rad XSPC RX480×2 &RX240
・Tube Tygon R3603 &PrimoChill
・Ram Mips base custom. Made in Japan
Impressive work WhiteSky
Agreed, that is badass.
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
Wow, awesome setup whitesky. More pics please!
That is the first time I've seen that done in an 800D, it looks great and packs a huge punch as well.
Thank you for the comment.
To be is the photograph of the remainder.
On the power
The side panel is 5 mm acrylic fiber and the honeycomb meshes of it.
The cover of the power used [ Lian Li Power Supply Bracket].
i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D
Water
・Pump MCP-355×2 ・GPU EK FC5870-NK
・CPU HEATKILLER Rev3.0 Limited
・Rad XSPC RX480×2 &RX240
・Tube Tygon R3603 &PrimoChill
・Ram Mips base custom. Made in Japan
Clever work on the psu mount, ingenious really
wow dude nice build, never knew u could put a 480 on the bottom of the 800D, so it can fit 2x 480s... WoW! Mind taking more pics of the inside like res, pumps etc? hehe.
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Ingenious WhiteSky :thumbsup:
Cooler Master ATCS 840 Silver Water Cooled || Vista x64 || Corsair HX1000
Swiftech MCR320 || MCP355 /w XSPC ResTop || Swiftech GTZ || 1/2" ID x 3/4" OD Duralene Tubing
Q9550@3.7Ghz, E0, 1.215 VID || Asus Rampage, 1.25 vCore, 1.29 NB, 1.32 VTT ||XFX 4870x2
Dell 3007WFP-HC || 2x Dell 2007WFP || 4GB(2x2GB) Mushkin DDR2 6400 800MHZ ram at 4-4-4-12-2T
ATH-A900/Z-2300s || FiiO E5 Amp || G15 Rev 1 || G7 || Logitech 9000 Quickcam || Salar M8 Microphone
6401AALS WD Caviar Black || 400GB Seagate || 500GB Seagate || 250 Seagate
White MSI Wind U100 2GB Ram || Windows 7
very nice build i have to say
WhiteSky - Your side panels have internal honeycomb structure? Looks really nice and clean, could you provide more details of how you put together this build? Excellent work!
Updated With Q-SLI , BTW temps are high so moar rads are needed
i7 980X | EVGA X58 Classified | 6 GB Corsair Dominator GT 2GHZ | 3-Way SLI GTX580| 2.5 TB Hdd | Corsair Obsidian 800D| Corsair AX1200W | Custom WC
Obsidian 800D Thread
AKA Arne-Mohammed and X-Force
sorry for bad English, I´m from Sweden
Hello, it is Ogge swe. It is a good thread.
I, too, enjoy in this thread.Thanking you.
Thanking of you, the comment to be glad about you
hello.WarlockSix
The remodeling of a case is simple. It puts a few photographs beforehand.
1.It decides the position to cut. 2.It cuts the board of the base, leaving the four corners.
3.It put a 1 mm Steelboard after cutting and it fixed it. 4.It makes the spacer of the 20 mm leg, too.
5.It cuts a red line in the completing.
6.The used meshes are this[ModRight ModMesh 480mm x 480mm x 1.0mm HEX Aluminum Mesh Panel - Black]
It uses and it is pouring two fittings for D/D-SLI.
i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D
Water
・Pump MCP-355×2 ・GPU EK FC5870-NK
・CPU HEATKILLER Rev3.0 Limited
・Rad XSPC RX480×2 &RX240
・Tube Tygon R3603 &PrimoChill
・Ram Mips base custom. Made in Japan
WhiteSky -
Thanks for the details, that is a very clean well done build.
Mac os 10.6.4 mod
This my new RIG Boreas II mod
Rampage III Extreme
Corsair 800D Case mod w/Boreas chiller
i7-980x 4.5ghz 145x31 1.36v/mem GT 2023mhz@8.8.8.22.98 T1 1.63v
SSD 2x40GB raid 0/ raptor 150GB-10RPM/750GB data drive
SAPPHIRE ATI HD5970 Hemlock 2GB OC@850/1200/1.100v
Boreas Chiller, WaterCooling . PSU ABS 1100w
CPU Block /EK-Supreme HF High Flow - Highest Performance CPU Water Block - Nickel
Chipset Block Koolance xtreme both
GPU EK-FC5970 copper
my video on my mod when i first started=>http://www.youtube.com/watch?v=8O41h2QM-PQ
--------------------------------------------------
my 3Dmark06 34215
Whitesky, where, or how did you get that side panel? If you made it, would you consider making another and selling it?? Or was it easy to make.
Thanks
hi Monkeyface
It is selling a side panel here.
CORSAIR Online Store→https://shop.corsair.com/store/item_...spx?id=1171683
Later, it is completion if searching for the factory to cut.
i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D
Water
・Pump MCP-355×2 ・GPU EK FC5870-NK
・CPU HEATKILLER Rev3.0 Limited
・Rad XSPC RX480×2 &RX240
・Tube Tygon R3603 &PrimoChill
・Ram Mips base custom. Made in Japan
Ok, so I buy that, then cut out the size for the plexi, put that in, then cut the area for the RAD?? How would I install the window?
Is this the window? http://www.performance-pcs.com/catal...ducts_id=24897
Then how do I make it stay?
Last edited by Monkeyface; 07-23-2010 at 06:03 PM.
Yup, I'd like to know too! On the other hand I just got my case and was thinking that if you put the rad on the other side of the case, then you just need to cut an opening in the side without the window. This would be pretty easy to cover with a good grill. You wouldn't have to worry about cutting two holes.
A couple of comments about this case: It's too bad corsair didn't extend the hole pattern at the bottom, the whole length of the case. As one can see it is almost good enough for another 3 fan rad. In fact, if they had made the case 1/4" longer then one could have the triple rad and power supply mounted down there also. Even more, one more slot opening and 1/4" would allow an SR-2 in there!
I find the side cover for the fan on the swappable hard drive cage kind of poorly designed. It seems to just hang from the right side and the upper clasp. I think if could rattle easily there. Anyone else notice this? Am I missing something that should support it from below?
Thanks
Here is my rig:
i7 3930k + Koolance CPU-370 + MCP35X + Black Ice GTX360 + Hailea HC-500A + Alphacool VPP655 || Asus Rampage IV Black Edition + EK-FB Asus R4BE || 4 x4GB Corsair Dominator Platinum 2400C9 || 4x Sapphire HD 7970 OC + Koolance VID-AR797 + RP-452X2 + 2x MCP655-B + 2x Black Ice GTX360 || SSD OCZ Vertex 3 240GB + Agility 3 60GB + WD Caviar Black 2TB + WD VelociRaptor 300GB + 2x Seagate 1.5TB 32MB + Seagate 3TB || 2x Corsair AX1200W || Logitech Z-5500 + G13 + G500s + G930 || Mountain Mods Extended Ascension || Dell U2711 27"
Heres mine atm:
I'll have it back together in a month or so lol
Mah Rig:
i7 970 @ 4.4Ghz
6GB Gelid Perfect Storm
Gigabyte UD5 Rev 2
128GB Corsair Nova SSD
Evga 470
Corsair Obsidian 800D
Corsair 1KW HXCustom Liquid Cooling:
PA 120.4
EK Supreme HF
Aquacomputer 470 block
Swiftech M35x w/top
Bookmarks