Anyone know if this card's voltage is adjustable with Afterburner?
http://www.newegg.com/Product/Produc...82E16814150476
Anyone know if this card's voltage is adjustable with Afterburner?
http://www.newegg.com/Product/Produc...82E16814150476
Originally Posted by chuchnit
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
it is not...
i7 860 @ 4.3 GHz || Gigabyte GA-P55A-UD7 || G.Skill Ripjaw 8GB 2000MHz w/ Fan || Swiftech XT CPU Block
MCP355 w/ XSPC Res Top || MCR320-QP || 2 x BlackIce GTX 120|| WD 750GB Caviar Black RAID 0
Corsair HX1000w || CoolerMaster ATCS 840 || OCZ Agility 60GB SSD RAID 0 || Lamptron FC-5
2 x Asus EAH5850 DirectCU TOP w/ EK Nickel/Acetal Water Blocks || EVGA 8800GTX physx
Um if that is the vanilla version then YES it is....
I have one and it responds very well to 1.2v
Edit:
That looks like the newer (cheaper) non reference version so ..... no software voltage control..... hardmod time!!!
X5670 B1 @175x24=4.2GHz @1.24v LLC on
Rampage III Extreme Bios 0003
G.skill Eco @1600 (7-7-7-20 1T) @1.4v
EVGA GTX 580 1.5GB
Auzen X-FI Prelude
Seasonic X-650 PSU
Intel X25-E SLC RAID 0
Samsung F3 1TB
Corsair H70 with dual 1600 rpm fan
Corsair 800D
3008WFP A00
black PCB, but power out the rear, and fan in the center points to a V2 card, and no soft mod voltage control.
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
What about the xxx version?
the ZND9 xxx original reference PCB, far as I know.
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
XXX version is fine
X5670 B1 @175x24=4.2GHz @1.24v LLC on
Rampage III Extreme Bios 0003
G.skill Eco @1600 (7-7-7-20 1T) @1.4v
EVGA GTX 580 1.5GB
Auzen X-FI Prelude
Seasonic X-650 PSU
Intel X25-E SLC RAID 0
Samsung F3 1TB
Corsair H70 with dual 1600 rpm fan
Corsair 800D
3008WFP A00
Wouldn't touch that card. Not talkin only about voltage btw. Guns I thought you had 4 cold reference 5870's anyway!!?
[SIGPIC][/SIGPIC]Bring... bring the amber lamps.
Sold them off to upgrade to Lightnings, which turned out to be quite disappointing.Wouldn't touch that card. Not talkin only about voltage btw. Guns I thought you had 4 cold reference 5870's anyway!!?
Anyone tried this one?
http://www.newegg.com/Product/Produc...82E16814121374
Last edited by Gunslinger; 04-14-2010 at 03:22 AM.
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
Just curious, what disappointed you about the Lightnings?
My 3 clock much worse than the reference models on air, and the 1 that I tried on LN2 was a dud also. I've heard of other benchers having issues on LN2 as well. It seems there are some pretty complex v-mods necessary to get them up to speed, and my soldering skills are pretty weak.
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
Posting Permissions
Reply With Quote
Bookmarks