What's a good, cheap (under $30) heatsink for a Saphire ATI Radeon 9800 SE?
Also, BGA/VGA Ramsinks. Are they worth it? Or just leave the chips baren? Or is there something better?
What's a good, cheap (under $30) heatsink for a Saphire ATI Radeon 9800 SE?
Also, BGA/VGA Ramsinks. Are they worth it? Or just leave the chips baren? Or is there something better?
Asus A7N8X Deluxe set to 333 MHz BUS
AMD XP 2600-333
------------------------
ATI Radeon 9000 (128 MB)
GPU core default: 274.75 MHz
Memory core default: 249.75 MHz
-----
80 GB 7,200 RPM 8mb buffer 9.8ms ATA/133 (Primary Master)
12 GB 5,400 RPM 512kb buffer 10.9ms ATA/33 (Primary Slave)
4x4x24 HP CD-RW (Secondary Master)
52x Creative CD-ROM (Secondary Slave)
35 GB 10,000 RPM WD Raptor SATA/150 (SATA-0 RAID0/1)
35 GB 10,000 RPM WD Raptor SATA/150 (sATA-1 RAID0/2)
SB Live! Platinum w/livedrive+remote
1.44 MB 3.5" Generic FDD
-----
768/128 Kbps Cable connection
This is the best out of the box easy to instal option available at the moment. You can use low profile BGA ramsinks with this as well.
http://www.svc.com/arcovgasilsu.html
P4 3.2
P4C800-E
Xtreme Tek Werkz Typhoon waterblock
Maze4 GPU Waterblock
Mcx159-P w/10,500rpm counter-rotating 50mm JMC fan
Mushin BH-5 Promo build 2-2-2
9800 pro with silversink ramsinks
WD Raptors
My Heatware
That looks pretty kool sink. With some BGA ramsinks it'll look sweet.
<MEGA-O>
ASRock Z97 Extreme 6 /i7 4790K De-Lid @ 4.7GHz
GSKILL Ripjaws X F3-2400C11D-16GXM 16GB (2x8GB)
H2O = XSPC RayStorm / Coolgate CG480 / Lowara D5 / XSPC Dual Bay Res V1
Liteon SSD SCS-256L9S 256GB / Toshiba Red 2TB / WD VelociRaptor 300GB
Zotac GTX 1070 AMP! Extreme @ 2100 /4500
SilverStone Zeus SST-ZM1350 1350w
Phanteks Enthoo Primo / Win10 Pro x64
** Under TITLE II, SECTION 210.340 it is legal to overclock **
It's /just/ out of my budget, tho. After shipping it's beyond $30.
Asus A7N8X Deluxe set to 333 MHz BUS
AMD XP 2600-333
------------------------
ATI Radeon 9000 (128 MB)
GPU core default: 274.75 MHz
Memory core default: 249.75 MHz
-----
80 GB 7,200 RPM 8mb buffer 9.8ms ATA/133 (Primary Master)
12 GB 5,400 RPM 512kb buffer 10.9ms ATA/33 (Primary Slave)
4x4x24 HP CD-RW (Secondary Master)
52x Creative CD-ROM (Secondary Slave)
35 GB 10,000 RPM WD Raptor SATA/150 (SATA-0 RAID0/1)
35 GB 10,000 RPM WD Raptor SATA/150 (sATA-1 RAID0/2)
SB Live! Platinum w/livedrive+remote
1.44 MB 3.5" Generic FDD
-----
768/128 Kbps Cable connection
Thermaltake vga coolers at outpost and it comes with 4 heatsinks
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
this one is 40$ but it looks good
Way too expensive, and way too large.
I really do need a low-profile heatsink under $30.
Asus A7N8X Deluxe set to 333 MHz BUS
AMD XP 2600-333
------------------------
ATI Radeon 9000 (128 MB)
GPU core default: 274.75 MHz
Memory core default: 249.75 MHz
-----
80 GB 7,200 RPM 8mb buffer 9.8ms ATA/133 (Primary Master)
12 GB 5,400 RPM 512kb buffer 10.9ms ATA/33 (Primary Slave)
4x4x24 HP CD-RW (Secondary Master)
52x Creative CD-ROM (Secondary Slave)
35 GB 10,000 RPM WD Raptor SATA/150 (SATA-0 RAID0/1)
35 GB 10,000 RPM WD Raptor SATA/150 (sATA-1 RAID0/2)
SB Live! Platinum w/livedrive+remote
1.44 MB 3.5" Generic FDD
-----
768/128 Kbps Cable connection
its hard, you will only have a poor one the best choice is the arctic silencer
Being big fast and expensive isn't always being best, y'know.
I'm looking at something like a BlORB or CORB, or one of those Vantec deals. Need to know which of them is best.
And again. Under $30.
Asus A7N8X Deluxe set to 333 MHz BUS
AMD XP 2600-333
------------------------
ATI Radeon 9000 (128 MB)
GPU core default: 274.75 MHz
Memory core default: 249.75 MHz
-----
80 GB 7,200 RPM 8mb buffer 9.8ms ATA/133 (Primary Master)
12 GB 5,400 RPM 512kb buffer 10.9ms ATA/33 (Primary Slave)
4x4x24 HP CD-RW (Secondary Master)
52x Creative CD-ROM (Secondary Slave)
35 GB 10,000 RPM WD Raptor SATA/150 (SATA-0 RAID0/1)
35 GB 10,000 RPM WD Raptor SATA/150 (sATA-1 RAID0/2)
SB Live! Platinum w/livedrive+remote
1.44 MB 3.5" Generic FDD
-----
768/128 Kbps Cable connection
i know u said low profile, but heres that vga silencer for ~25 dollars, possibly under 30$ after shipping, just incase u cant find anything else
http://www.scythe-usa.com/index.html
msi k8n neo2 plat
3200+ winchester (10x262)
bfg 6800gt
pdp pc3200 xbl
thermalright xp-90 w/7v tornado 92mm
VGA Scilencer is prob best bet mate
- LL V1000 - GA965P-DS3 - Intel C2D e6420 3.22GHz - 2GB OCZ 6400 Plat Rev 2 - GeForce 8800GT KO AC S1 - 500w Enermax Liberty -
You will not die if you pay 35$!!!!!
What happen to a good old 1u cooler. Can't he use one of those. They run pretty cheap and are real good.
It will when I don't /have/ $35.
I'll just get a Vantec, since noone else can find a heatsink under $30.
Vantec: $14
Ramsinks: $6
AA Epoxy: $5
Total: $25
Last edited by Axle Gear; 12-19-2003 at 09:41 AM.
Asus A7N8X Deluxe set to 333 MHz BUS
AMD XP 2600-333
------------------------
ATI Radeon 9000 (128 MB)
GPU core default: 274.75 MHz
Memory core default: 249.75 MHz
-----
80 GB 7,200 RPM 8mb buffer 9.8ms ATA/133 (Primary Master)
12 GB 5,400 RPM 512kb buffer 10.9ms ATA/33 (Primary Slave)
4x4x24 HP CD-RW (Secondary Master)
52x Creative CD-ROM (Secondary Slave)
35 GB 10,000 RPM WD Raptor SATA/150 (SATA-0 RAID0/1)
35 GB 10,000 RPM WD Raptor SATA/150 (sATA-1 RAID0/2)
SB Live! Platinum w/livedrive+remote
1.44 MB 3.5" Generic FDD
-----
768/128 Kbps Cable connection
get a copper 1u its low profile and under $30 all you have to do is mark off the holes on your card and drill em real quick.
Bookmarks