EVGA SR2-It is here and OH MY GOD is it a thing of beauty!

[miahallen]

Let's just say that I had to offer Vantage a choice: Work or I call your boss!
After it screamed it worked!
Thank GOD on the card.. That was bothering me.
Also made a change:

Looking better Dave....try 7-7-7-20-59 1T...should be a piece of cake (maybe a slight bump in VTT to get there though)

6-6-6-18-44 1T should be doable...but you'll need to start pumping in the VTT and DRAM voltage for that

[Movieman]

Looking better Dave....try 7-7-7-20-59 1T...should be a piece of cake

ok, one sec...fizzzzzle,smoke smell...

[Movieman]

Looking better Dave....try 7-7-7-20-59 1T...should be a piece of cake (maybe a slight bump in VTT to get there though)

6-6-6-18-44 1T should be doable...but you'll need to start pumping in the VTT and DRAM voltage for that

Sure, you do a ninja edit after I log off and go lock the thing tighter than a bulls arse at fly time!
There's a lot more settings there than the ones you mentioned:
settings: Default values
TCL:9
TRAS:24
TRP:9
TRCD:9
TWR:10
TRFC:74
TWTR:5
TRRD:5
TRTP:5
TFAW:20
Back to back CAS delay:0
Memory Low gap: Auto

I did the CAS7-7-7-20-59 you suggested, left the others alone and POOF, no post, had to clear CMOS to get back running..

[Don_Dan]

Can you try 7-9-7-23, or raise tRCD in general when you try to clock the memory?

[Sam_oslo]

Playing with MEM-settings will affect the VVT-requirements on the locked Uncore of these VVT-hungry chips.

I've been playing with x6 RAM-multiplier, DDR3 ~@1066MHz CL5, and could log into w7 with ~5BCLK higher than x8 RAM. I haven't had time to test the stability on the new setup yet, but lower RAM-multi seams to run stable with less VVT.

[perkam]

Those are insane numbers. Just read the entire thread. MM must have had a grin on his face for a week xD

The Worlds FIRST 100K PPD Machine !! Here at XS !! Where are the news people !! Someone write something up !!

Perkam

[phelan1777]

Warning - Temporary thread hi-jacking.

Hey Perkam are you playing STO, just asking because of your Avatar?

[perkam]

Warning - Temporary thread hi-jacking.

Hey Perkam are you playing STO, just asking because of your Avatar?

I was, and was quite excited about it too.

Ended up cancelling after the first month. The lack of polish on the game is simply astonishing.

Perkam

[Gautam]

I did the CAS7-7-7-20-59 you suggested, left the others alone and POOF, no post, had to clear CMOS to get back running..

What vdimm are you running?

[artemm]

Can you try 7-9-7-23, or raise tRCD in general when you try to clock the memory?

I second this motion, Dave. 7-7-7-20 is too tight, even for that setup. Try the above or even 7-9-7-24+

[Movieman]

What vdimm are you running?

1.65v

[Sam_oslo]

I'm wondering if ECC RAM can have a big impact on the stability.

Anybody have tried ECC RAM with X56xx yet?

[Movieman]

I'm wondering if ECC RAM can have a big impact on the stability.

Anybody have tried ECC RAM with X56xx yet?

Been up and stable now for 24 hours at 4352..25x174 w/1.4v vcore,1.325VTT,1.65v on the memory and just heard I will be getting some cards to try in those empty barren PCI-e slots..

[=[PULSAR]=]

Been up and stable now for 24 hours at 4352..25x174 w/1.4v vcore,1.325VTT,1.65v on the memory and just heard I will be getting some cards to try in those empty barren PCI-e slots..

Okay Dave you might as well come out and say it that you have some fermi's on the way

[D_A]

fermi ... a little blue pill for your e-peen

[CaptMorgan]

Okay Dave you might as well come out and say it that you have some fermi's on the way

And that you will join us on the GRID again to see what those babies can do

[Sam_oslo]

Been up and stable now for 24 hours at 4352..25x174 w/1.4v vcore,1.325VTT,1.65v on the memory and just heard I will be getting some cards to try in those empty barren PCI-e slots..

Sounds really good I've ended up with BCLK174 at VVT=1.32v too for now, but i really miss those x25 multi you got there .

Lets hope you end up with 4 x GTX 480 in "those empty barren PCI-e slots", then we are looking at several WR, easily.

[Movieman]

Okay Dave you might as well come out and say it that you have some fermi's on the way

no habla fermi..
I can honestly say that I've never even seen a fermi card. yet

[D_A]

I hear there may or may not be an NDA that may or may not be lifted at some point on a day that may or may not be Friday the 26th.

[SAL36864]

I hear there may or may not be an NDA that may or may not be lifted at some point on a day that may or may not be Friday the 26th.

I thought that they made an official announcement about that.

[D_A]

Possibly, but I'm relying heavily on hear-say

[anubis]

whatever youre getting....it CANT be something thats in the open ATM

ati 5990 ???

you have the nicest toybox on the planet anyways....

[Otis11]

no habla fermi..
I can honestly say that I've never even seen a fermi card. yet

That's cuz it's on it's way...

And I think ya might have an extra 2 in your title... If I'm wrong... Count me in on 5 of whatever you got...

[Movieman]

what's coming is to test and review in the SM board I did then review on.
I'll know for sure when it arrives.

[=[PULSAR]=]

Just ran a cooler comparison between TR extreme and WC setup using WCG.

i7 920 @ 4ghz w/1.35v
22C ambient

TR extreme | 2x 113cfm fans:
73C

Apogee XT | Ek FBWB | 2x Thermochill PA120.4 | 8x Scythe 130cfm fans @ 7V | Ek Dual Pump Top | 2x MCP655
50C

JEEZE! I can't wait to get those Xeons in my hand and see what I can really do for WCG Hoping for 4.75ghz 24/7