MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 40 of 41 FirstFirst ... 303738394041 LastLast
Results 976 to 1,000 of 1015

Thread: cinebench 11.5

  1. #976
    Xtreme Enthusiast
    Join Date
    Apr 2006
    Location
    Bulgaria
    Posts
    544
    Quote Originally Posted by FlanK3r View Post
    How do you like this little chip? I think its the best AMD CPU 2013/2014
    I really like it.
    However, I killed my SSD while running the system at 134 FSB.
    It might be a coincidence, but be careful. Not sure if PCI-E is tied to FSB again, but most probably - yes.
    This ssd had been running numerous times at 130+ PCI-E on other platforms (e.g. DFI 790FXB-M2RSH), but died shortly on this one.
    X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
    EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red

  2. #977
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    ufff, good to know it. I tested with classic HDD 5150 Athlon and I had some issues with booting with high BCLK wall (sometimes no post, sometimes OK to Windows)
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  3. #978
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    Latest Cinebench 11.5 results... for my Quad Opty home machine... did some BIOS tuning:

    16.86





    Setup is SuperMicro quad opteron motherboard, populated with 2 Opteron 6180SE (2.5 GHz, 12 cores each = 24 cores total).

    Last edited by rvborgh; 09-22-2014 at 04:56 PM.

  4. #979
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796


    FX-8370E 5238 MHz 9.04b
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  5. #980
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    FX-8370 5243 MHz 9.05 points
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  6. #981
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    My 2009 vintage Dual Opteron 8439SE clock at 3.262 GHz. 11.06 points


  7. #982
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    Just updated my "Quad Opty" project machine tonight with 4 ES chips (unlocked multiplier and voltage).

    Here's the baseline with 4 x Opteron 61xx ES chips running at 2.1 Ghz: 26.83



    video of run:

    https://www.youtube.com/watch?v=pvXk...ature=youtu.be
    Last edited by rvborgh; 10-15-2014 at 05:47 PM.

  8. #983
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    Really nice score!

    Have you played with OC, yet ?

  9. #984
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    hi Felix,

    Thanks

    i pulled the two 6180SEs that i had in there and installed these yesterday, so i thought i would take a baseline. These ES chips are unlocked for both voltage and clock multiplier so i'll be running them at 3.0 GHz... as soon as i get to that (probably this weekend) i will most certainly do another Cinebench 11.5 run.

  10. #985
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    Waiting for the rest of monstrosity to unleash....

  11. #986
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    Hi Felix,

    i probably will up things to 2.5 over the weekend now that i think about it... (same stock speed as the 6180SEs that were in there). The reason being that the two dynatrons that are running on top of the upper two processors are probably not up to snuff for 3 GHz. Need to pick up another two Noctua coolers for that. Its an interesting and fun project.

  12. #987
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    Had some time to spend seeing how well these 4 chips would run at 1.1v. They didn't like 2.8 GHz but run at 2.6 GHz completely stable... didn't want to up the voltage or frequency beyond that because i am still using two stockish coolers on the top two processors... hope you folks like the results as much as i did:

    32.78


  13. #988
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944

  14. #989
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    hi felix, i see you are just as shocked as i was... the ridiculous thing is that these things can be taken up to 1.55 volts i think... and i know they are all capable of 3.0 GHz. Power consumption wasn't too bad given that the motherboard was throwing 124.8 GHz at the problem... it ran around 660 watts. The things ran very cool as well. i think low 40Cs range on the ones cooled by the Noctuas. A bit shocking to me to say the least.

    Fun pic i took just after installing them:

    Last edited by rvborgh; 10-17-2014 at 04:57 AM.

  15. #990
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    Latest update for my Quad Opty rig: Up to 2.6 Ghz ran fine on stock voltage of 1.1. Tried running 2.7 GHz on stock voltage... no go... so bumped it to 1.125v and it ran fine up to 2.8 GHz. 2.9 Ghz required a bump to 1.15v. 3.0 Ghz required another bump to 1.175v. Everything is stable. It seems that AMD really outdid themselves with these Magny Cours chips. Wattage during these Cinebench runs was around 920 or there abouts for the 3.0 GHz runs. i really think this has more in it, but we are talking well over 1000w... probably closer to 1100w at full bore... which is a bit crazy if you ask me for a home PC. In addition the SuperMicro PSU is only rated for 1400w...

    The score for 3.0 Ghz: 37.21


  16. #991
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    wow man!
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  17. #992
    Registered User
    Join Date
    Jun 2014
    Posts
    28
    Hi Flank3r, same thoughts as me

    if you would like watch a run... i uploaded it to Youtube:



    At some point i will try for 3.1 and 3.2 GHz... by upping the voltage a bit, and i did get a run in at 3.1 but it wasn't stable... but it was drawing 1025 watts from the wall... so i thought i should probably stop for now. Hope folks enjoy the vid (was a bit tired when i made it but that is the way it rolls)...

  18. #993
    Registered User
    Join Date
    Jul 2013
    Posts
    72
    This is the highest my FX will go.

    A run @ 5350 Mhz - Score 9.09



    5400 Mhz isn't achievable. Perhaps with a room temperature of 10C or less ...
    Last edited by IronBalls; 10-21-2014 at 01:48 PM.

  19. #994
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    very good 8320 chip. Try this run againg with high priority for better score
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  20. #995
    Registered User
    Join Date
    Jul 2013
    Posts
    72
    Quote Originally Posted by FlanK3r View Post
    very good 8320 chip. Try this run againg with high priority for better score
    Thanks for the advice. It does help

    Here is a run @ 5375 Mhz - Score 9.23
    Room temp while benching was 17C. Nearly achieved a 5400 Mhz run, but Cinebench freezed near completion.


  21. #996
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    very nice results, awesome man .The cooling system?
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  22. #997
    Registered User
    Join Date
    Jul 2013
    Posts
    72
    Quote Originally Posted by FlanK3r View Post
    very nice results, awesome man .The cooling system?
    I have a highend watercooling. Completely custom.

    Pump : Aquastream XT Ultra. This pump is quiet, powerful and compared to other pumps it only consumes 4-5 watts. Less heat transferred to the water.
    Radiator : Mora 3 with 4 180mm fans. Probably the best radiator out there.
    Waterblock : Koolance 380A. Bought it a few days ago, but doesn't do much better than my old NexXxos.
    My R290 is also watercooled.

    The fact is, many here would do better than my FX 8320. When you delid the CPU, you can expect an improvement of 50 to 100 Mhz.
    So my chip is above average, but the new FX that came out should do better if delidded.

  23. #998
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    What is the temperature outside your room ?

  24. #999
    Registered User
    Join Date
    Jul 2013
    Posts
    72
    Quote Originally Posted by felix_w View Post
    What is the temperature outside your room ?
    Yesterday, it was 10-12C. Today even less, more like 8-9C

  25. #1000
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    If your tubing is long enough you can leave the rad outside, so the tubing passes through a small gap of the door/window

    This is how my setup is, actually, but permanent. I have a Phobya 1080 with D5 placed outside and i guided the tubing through the outer wall into the room...

    You can gain a 7-8C difference and still not freeze yourself

Page 40 of 41 FirstFirst ... 303738394041 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •