That's boring and it's not stable at stock anyway, I've got the Q3QP to play around with so it doesn't matter. I'll try to push it later to day and possibly take it out of it's misery.
A couple of pics of my kitchen/benching table.
That's boring and it's not stable at stock anyway, I've got the Q3QP to play around with so it doesn't matter. I'll try to push it later to day and possibly take it out of it's misery.
A couple of pics of my kitchen/benching table.
Last edited by Mydog; 02-16-2010 at 06:29 AM.
If you want you can send it to me
Ill pay teh postage :P
My little bro could do with a new computer
Nice setup dude!
Right beside the door thats open, haha quality
With -10C straight through the rig, check the water temps on both loops here.Right beside the door thats open, haha quality
Min GPU temp 4 C
I can do 1,35 vcore and 1100++ on the 5870's with those temps
Thats crazy 9*C fluid!
Haha, its times like this that i wanna like in the arctic circle :P
those with the A0: If it has six core, 6 threads, it's a gulftown, pure and simple. Don't let these folks with B0+ give you any BS about otherwise.
ASUS Rampage Extreme IV on bios 4802
Core i7 4930K . 4.8ghz 24/7
Corsair Dominator Platinum GT 16GB
EVGA 77 ACX X2
Lian Li custom 300w phase change cooling
Lian Li V2000 case @ -43c
Thermaltake 1200W modular PSU
Samsung 840 Pro 250 gb
Intel 160gd SSD X25
WD 500gb, WD 1TB drive
Windows 8.1 pro
6cores, 12 threads? not 6 threads right?
Gotta figure out what to do with the rest of my Q3QPs and Q3FEs
Nothing special.
Forgive for my English because I only learn it
sorry 6 threads LOL
ASUS Rampage Extreme IV on bios 4802
Core i7 4930K . 4.8ghz 24/7
Corsair Dominator Platinum GT 16GB
EVGA 77 ACX X2
Lian Li custom 300w phase change cooling
Lian Li V2000 case @ -43c
Thermaltake 1200W modular PSU
Samsung 840 Pro 250 gb
Intel 160gd SSD X25
WD 500gb, WD 1TB drive
Windows 8.1 pro
i'll take that half dead chip off your hands!!!!
one mans trash is another mans treasure
would a step towards finally building an i7 system...
Case---------CM Cosmos (http://www.xtremesystems.org/Forums/...d.php?t=194812 )
Power Supply-CM RealPower 850W
Processor-----Intel Q6600 SLACR @ 3.6ghz 1.44v
Motherboard--DFI x48 UT-T2R
RAM----------G Skill Black Pi 2x2GB DDR2-900 @ 450mhz 4-3-3-6 CR1
GPU----------Dual GTX 275 896MB (usually stock speeds)
HDD----------Dual VelociRaptor 150GB(Raid 0) 320GB Backup
Audio--------Razer AC-1 (On sale on woot for 50$
Mouse/KB----Razer Copperhead/Logitech G15
Watercooling: AquaComputer Cuplex HD, MCW 60's, 2x120mm Radiator, MCP655, EK Multi-Res.
I love to see 6 temp with realtemp
Great chip guyz !
BTTB - Gigabyte Z87X-OC - WCed I7 4770k - 2x8gb Ballistix 1600mhz - Zotac GTX 780
Asus Xonar Pheobus - OS -> Toshiba Q 256gb - Games -> 2x Agility 4 256gb Raid0
Corsair HX850 - Tecnofront HWD BenchTable - Asus VE278Q 5760x1080
Serveur - Asus Z77m PRO - 2500K - NH-C12P - 4x4gb G.Skill Ares 1600mhz
Agility 4 128gb - Corsair CX430M - 1TB Black - 2TB green - 2TB Red
KatPat - Gigabyte 990FXA-UD3 - FX-8320 - PH-TC14CS - 2x4gb Viper 1600mhz - GTS 450
Samsung Evo 120gb - Corsair HX750 - Bitfenix Survivor White - Asus VE247H
I have HWMonitor of it @ 5.1GHz if you guys want:
I got this today:
http://valid.canardpc.com/show_oc.php?id=1023032
Sorry for my bad english.
Nice
what cooling dude?
OCZ Cryo-Z.Originally Posted by Mutant_Tractor
Nice
what cooling dude?
Sorry for my bad english.
My SS is arriving next week along with my chipset waterblock and LN2 pot
This chip is in for a bump ride :P
nothin.. i got 12ghz with heatsink made of kryptonite
Hardcore... and it can kill superman :P
yep and wolverine multipurpose tool
Who'd you buy it from?
I hear koolance are bringing out kryptonite blocks :P
herd duniek was gona make a fullcoverblock outa this kryptonite hottness!!
How do you guys think this baby will run on standard high end aircooling? I'd like to see how it will run at maximum safe voltage rating. :P
CPU i7 920 D0 @ 4.2GHz
Motherboard ASUS R2G
RAM Corsair XMS3 3x2GB CL7 1600MHz
GPU ATI 4870x2
Sound Card Auzentech Prelude 7.1
PSU Corsair HX1000W
Cooling Mega Shadow + Noctua NC-U6
Case Antec P180 Mini Picture
probably this same as you have now with your 920. may 4.6-4.8ghz without crying to much. Hey you guys with the A0's how the CPU longevity at those high voltages. I would thing balancing some of the load onto the QPI would help you reach you clock 29x times 180 QPI =5.2ghz, and so on. If the memory get squirrely I just drop it down to 2:8 or whatever works. Not Criticising, Just curious why put all that juice on the CPU?
ASUS Rampage Extreme IV on bios 4802
Core i7 4930K . 4.8ghz 24/7
Corsair Dominator Platinum GT 16GB
EVGA 77 ACX X2
Lian Li custom 300w phase change cooling
Lian Li V2000 case @ -43c
Thermaltake 1200W modular PSU
Samsung 840 Pro 250 gb
Intel 160gd SSD X25
WD 500gb, WD 1TB drive
Windows 8.1 pro
ive heard of several gulftowns dieing with 1.4v after a while... so be careful
very nice results! slightly higher than the best 45nm quads, but with 2 extra cores
now if only those extra cores made a difference in more apps :/
So you guys recon down the multi's and up the QPI?
@saaya - What Gulftowns? Q3QP or Q3FE? or the new B0 + B1 Revs?
no idea...
but i heard from 4 people that they killed a gulftown with 1.4-1.5v
Reply With Quote
Bookmarks