here are the photos, do some testing tonight ... because today I changed my motherboard I replaced my old P5QL-Pro with a P5E I have done well?
here are the photos, do some testing tonight ... because today I changed my motherboard I replaced my old P5QL-Pro with a P5E I have done well?
Looks good.
Are those single turn trimmers?
How many times do you have to turn the nub to go from maximum resistance to no resistance?
I did some tests, the only tool I used is ATITool, and to change the power I used asus smart doctor, Riech to hold without errors ATITool:
Engine 750
Schader 1875 to 1.25 at 56 ° C
the only problem is the memory even increasing VAT 2.15 I can not go beyond 1840 but then I had the temperature at 60 ° up
I have 1810 hours at 55 ° stable with ATITool
Now I try to play ...
even in the game runs jerky, are bad memories?
I need help with volt mod for non-reference 9600GTs. One its a PNY 9600GT and the other one its a XFX 9600GT ,thats quite a challenge for you experts out there since they are different PCBs :/, i have them in SLI and work great in SLI at 750/1850/936Mhz on Stock air cooler. They are going under water and i would like to have them Maxed out to squezze every last drop of performance out of them since they are getting quite old. Please can some one help me ? I will appreciate any kind of help and guidance. Thank you in advanced.
*If you need Pictures let me know and i will post them asap*
Regards: Chispy.
Need some pics of the XFX card plz. As for the PNY, it should be reference design. All the PNY's I've seen so far are. If it's not reference or like any of the other 9600GTs I have listed here, post pics of it to.
GeForce 9600GT reference PCB: MEM GPU vMeasure Note: Ref designs most do a VID mod:Source1 Source2
GeForce 9600GT Galaxy non-reference PCB: GPU MEM vMeasure
GeForce 9600GT Zotac non-reference PCB (version A): MEM GPU vMeasure
GeForce 9600GT Zotac non-reference PCB (version B): GPU MEM
GeForce 9600GT MSI non-reference PCB: GPU MEM vMeasure1 vMeasure2
GeForce 9600GT MSI non-reference PCB (version B) GPU MEM vMeasure
GeForce 9600GT (RT8802A pwm) VID Mod: Pic1 | Pic2 Table1 Table2 Table3
Thank you PizzaMan , here is your challenge .
Stock PNY 9600GT 512MB Samsung memory ICs -
Back -
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
FRONT -
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
Last edited by chispy; 04-19-2010 at 06:23 PM.
Stock XFX 9600GT 512MB Quimonda Memory ICs -
FRONT -
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
BACK -
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
By chispy, shot with FinePix A340 at 2010-04-19
Last edited by chispy; 04-19-2010 at 06:46 PM.
Let me know if you need more or Better pictures.
Right now they are doing 775/1950/999Mhz on H2O Furmark stable 30 minutes.
PNY memory ics are Samsung and the XFX are Quimonda.
Thank you in advanced.
Regards: Chispy.
Cool. Fresh meat.
I've marked the areas that look like GPU and MEM voltage measure points. I've also marked IC that we need the numbers off of. Also, go ahead and take some stock voltage measurements.
EDIT: Need closer pic of the XFX card's ICs plz.
Last edited by PizzaMan; 04-19-2010 at 07:21 PM.
Bookmarks