Flammingblade G14 bios

[Lord Trident]

ok flamming blade bios latest beta

http://www.ex3clan.com/foxconn/X58A02-8C9F1G14.zip

the list of fixes

1. Update Intel MRC code to Ver.1.90.
2. Update CPU microcode for support Gulftown CPU B0 stepping, CPUID:206C1h.
3. Fixed 64 bits OS start-up spend too much time with Gulftown CPU.
4. Added above Max. none turbo ratio for Gulftown B0 stepping CPU.
(CPUID:206C1h, S Spec. "Q3VG").
have fun

[Blackstare]

I'll give it a shot later, thanks!

[IFMU]

Would this work with the GTI version?

*EDIT*
Nevermind, found your other thread...
/*EDIT*

[Blackstare]

It should work with the GTI, plus, you'll get SLi support xD

[IFMU]

Well if it does, the sli doesnt matter, dont have the hardware for that, let alone dont think I will. lol

Theres another thread with the bios for the GTI anyways.

[r1ch]

Well if it does, the sli doesnt matter, dont have the hardware for that, let alone dont think I will. lol

Theres another thread with the bios for the GTI anyways.

Bear in mind this one will also appear to enable RAID for the GTI i.e you can select it in the BIOS, but it still doesn't work.

It also enabled a couple more of the DRAM voltages (vref?) I believe.

[IFMU]

Hmm... sucky... would like to run raid, ah well.

No biggie with dram voltages though, severely limited due to cpu, so no biggie there.

[Lord Trident]

well raid does not work as the south chip is not a raid chip thatsw part of the cut down on the gti version

[kocev666]

I can not withdraw it with Google browser I

[Lord Trident]

try this link
http://rapidshare.com/files/33416961...F1G14.zip.html

[kocev666]

Thanks, it will fail tonight how it compared to last from August last year working on 64bit

[CobraXP]

Bios update
http://www.ex3clan.com/foxconn/X58A02-8C9F1G14.zip

[kocev666]

Sorry but the BIOS is not successful, I do not like to be diverted from one natural and one logical core. Fixed a bug which prevented to work with 64bit but not otherwise noticed this with my cores enough. Recognizes processor but there unless it is done only for new processors

[Lord Trident]

i dont understand what your bug is
please be clearer or else i can not get fix

thanks

[kocev666]

6 cores shows me all the programs, the temperature is lower than in 8 cores

[Lord Trident]

and what program you talking about
if you can give a screen shoot of what it is
please remember flammingblade and bloodrage are based on the same bios core and no one else are reporting problem.

[Blackstare]

Im running fine with it, got a sligthly higher OC, with P06 couldn't get past 4Ghz

[ShtopoRrr]

BUG:

It's aircooled of course

[Lord Trident]

lol well i dont see that on my tested board
so i not say it a bug but you have a faulty board
i would rma the board and get another board

unless other people see it as well then i can push to get fix but if you the only one then it your board

thanks

[kocev666]

Sorry, my mistake was I was not cleared and Cmos and defolt 3 cores are set in BIOS obviously 6 core. Now everything is fine but you have to manually set the settings, rather than saved profile.

[ShtopoRrr]

This bug is not always, usually in first minutes after start. So i dont see any reasons for rma because official bioses work fine.

[Lord Trident]

can you give me your full spec
as i said am not seeing but then again am not testing with the same setup as you

thanks

[ShtopoRrr]

, this screen with p06 bios

upd: oops, it seems that it is really faulty board: once today i saw this bug with p06 bios, and, moreover, when the bug isnt occur nb&ambient temps readings seem to stay at some initial value: linX run cant change them.
So, i will go for rma

[gillbot]

Does anyone know if the Flaming Blade GTI has support for the L5609 Xeon?