My first single stage

[kylo_89]

Hallo


I wanna show you picture from build of my first single stage.

1) Danfoss NL11F



2) Suction line--> made by Piotres



3) Condenser



4) Stuff



5) Case --> I made it my self


6) Mounting




Latest picture,



and my profi isolation (it's not made in 100%)



See you soon,

PS

Sorry for my bad english

[Patrickclouds]

did you braze or solder it?

[cooling storm]

it looks nice but did you braze or solder it and how high is the % of silver in the soder or braze?

[sdumper]

Why is everyone asking him if he used solder? I looked again at the picts and it looks like silver to me...

[Buckeye]

Very nice clean looking unit

I like the handle on the top for carrying around

[cooling storm]

becouse i use 3% silver soder and i dont kno if it will hold

[sdumper]

becouse i use 3% silver soder and i dont kno if it will hold

Why didnt you just use brazing rods of 15% silver...and to be sure it holds and is leak free just pressurize with 300 psi of nitrogen for a few days.

[cooling storm]

i cant find 15% silver rods

[sdumper]

Are you in the US?

If so just buy staySilv 15%: http://cgi.ebay.com/9-HARRIS-STAY-SI...item27ad19983f

http://cgi.ebay.com/Harris-Stay-Silv...item3ca7753f49

[cooling storm]

i live in drammen in norway

[Renemity73]

i just hope not 3 videos for one song..like ITS......
How do i get a TR news letter?

[kylo_89]

I use 3% silver solder. I think it's gonna be ok, but if I see some leaks I will change it on rods of 15% silver.

[kylo_89]

I finished my single stage few weeks ago, but i forget show you the picture of build.


First of all i ordered oil and gas from local shop:



Then i check there is no leaks and make a vacuum:



First Frost...



...and some idle temperature.



Now i made a calibration for e8400 (i haven't built dummy load yet)



Temperature after calibration on e8400 @ 4.0Ghz @ 1.7v (stres)



Oc results:





Final look:

[Duh]

I can't get it how you get it look so damn good ( even not taking into account its your first build).. I can only clap and bow .. VERY WELL DONE

[SexyMF]

I can't get it how you get it look so damn good ( even not taking into account its your first build).. I can only clap and bow .. VERY WELL DONE

You get a nice case cut then you purchase new components for everything. Braze a few joints and your done. The hard part is brazing an evaporator and making up the mounting kit. So when you purchase it all done, thats 80% of a build finished already.

Kylo please don't take the comment as a personal stab at your build - it is a general comment. I like the handle on your case, it's a nice touch. From the looks of it, it folds flush back into the case?

[kylo_89]

folds flush back into the case?

Yes it is, it comes from old radio

[sdumper]

Did you make that case yourself out of sheet metal?

[kylo_89]

Did you make that case yourself out of sheet metal?

Yes I did, I use two hammers and cramp.

[OverShocked]

Wow dude, nice case you got there.

[cooling storm]

wow very good build for a first stage and for the first time =)

[kylo_89]

Thank you guys. I must shorten cap tube because under load there is too much preasure on a high side and built/buy dummy load to calibrate this unit, I think 200~220W is in range.

[n00b 0f l337]

What's your superheat? That is a tiny condenser.