Intel 4.5GHz & 5GHz LinX Stable Club

[crossg]

The memory screen is not mandatory.

Yeah, still not very smart putting up 2 CPU-Z's on the same info tab.

Nice rig BTW. Mine doesn't like to SLI 2 GTX 580's with modrerate clocks. Just shuts off when loading the first test in 3DMK 11. Could be mobo or PSU.

[nijel]

i7 2600K L041C108
GA-P67A-UD7
Air (ambient 22C) - ZEROtherm ZT-10D Premium with Panaflo 120mm x 38mm Ultra High Speed
G.SKILL Ripjaws-X F3-12800CL9D-8GBXL

[PolRoger]

4th submission...

This SB runs 50x with BIOS PLL voltage overide set to disable and will boot/bench 55x.
Cooling: TRUE Black with push/pull.
Ambient temps ~ 2/3 C.

[Mobsters]

First entry and most likely last with this cpu Some smoke is almost in air

MB: EVGA X58 sli
Watercooled, room temp ~20'c
CPU batch 3931A219

[the_real_7]

First entry and most likely last with this cpu Some smoke is almost in air

MB: EVGA X58 sli
Watercooled, room temp ~20'c
CPU batch 3931A219

took you a little more voltage than most , but excellent
try this what really weird change your uncore from 16x to 17x you get more performance and less stress . . why i have no idea

[OC Nub]

First entry and most likely last with this cpu Some smoke is almost in air

MB: EVGA X58 sli
Watercooled, room temp ~20'c
CPU batch 3931A219

Congrats!

Great temps for 1.5v+.

[orion23]

The testing for this club needs to have better rules so that all systems are tested equally.

HT ON vs HT OFF?
Sandry Bridge SP1 Linx AVX or older?

[zsamz_]

e8500 single stage

told ya i be back

i'll be back when i play with some nice 920s

i might try to go a bit higher

[Ace.]

Core i5-2500k 5.3Ghz everything is ok ?

[radaja]

e8500 single stage

told ya i be back

i'll be back when i play with some nice 920s

i might try to go a bit higher

nice,cant wait to see what you+920+SS can do

[OC Nub]

e8500 single stage

told ya i be back

i'll be back when i play with some nice 920s

i might try to go a bit higher

Congrats, Great job!

I want to see the 920 also, break some records man.

[The Nemesis]

i7 2600K L042B243
Maximus IV Extreme 901 bios
4 GB G.SKILL Perfect Storm Model F3-17600CL8D-4GBPS
Swiftech's Apogee XT Swiftec MCP355/Laing DDC-2 w/XSPC Acrylic Reservoir
Thermochill PA120.2 Slipstream 110 cfm's



not a very good batch does 4.8GHz linX stable at 1.4 though

[Johnny87au]

@zsamz nice score buddy!!

[PolRoger]

Submission #5...

Cooling: Noctua NH-U12P with push/pull ambient temps were ~7/8C.

[C-N]

4th submission...

This SB runs 50x with BIOS PLL voltage overide set to disable and will boot/bench 55x.
Cooling: TRUE Black with push/pull.
Ambient temps ~ 2/3 C.

awesome chip my friend

[dragonhunter]

dragonhunter | 1.45 in bios | ASUS P8P67 Deluxe | WC | L042B243

[zalbard]

First entry and most likely last with this cpu Some smoke is almost in air

Good job! Don't set it on fire!

HT ON vs HT OFF?
Sandry Bridge SP1 Linx AVX or older?

HT is already addressed. AVX is another thing, I'll think about it.

e8500 single stage

You haven't read the rules.

Core i5-2500k 5.3Ghz everything is ok ?

Your batch number isn't listed and your CPU frequency is too high!

Submission #5...

You sure are addicted, man! Added both of yours. Keep up the good work!

[the_real_7]

4th submission...

This SB runs 50x with BIOS PLL voltage overide set to disable and will boot/bench 55x.
Cooling: TRUE Black with push/pull.
Ambient temps ~ 2/3 C.

as im a user of PLL voltage awesome you can hit so high without amazing stuff

[porn_43]

CPU: i7-2600K [#L042A969] @ 5090.2Mhz
M/B: Biostar TP67XE
VGA : xfx HD 4650
Ram: G.SKILL F3-17600CL7D-4GBPIS CL 7-10-10-28
Power Supply : Enermax Liberty ELT620AWT
Case : Tese Base
Cooling : EK Supreme HF Full Copper; Black Ice GT Xtreme 360; NMB-MAT 1.30A x 6 FullSpeed

Room temp 28 c

CPU Voltage 1.53v; DRAM 1.716v
BCLK 10190 x 50.0 Multiplier

[porn_43]

My old system

CPU: i7-980X [#3044B034] @ 4770.9MHz
M/B: Rampage III Extreme [EK Fullboard]
VGA : xfx HD 4650
Ram: Kingston HyperX 2000 CL8 2GB x 3
Power Supply : Silverstone SST-ST1000-P
Case : Tese Base
Cooling : EK Supreme HF Full Copper | Black Ice GT Xtreme 360 |Fans NMB-MAT 1.30A x 6 FullSpeed

Room temp 21 c

CPU Voltage 1.5937v | QPI 1.2625v | DRAM 1.72306v
BCLK 207.4 MHz x 23.0 Multiplier

[PolRoger]

awesome chip my friend

as im a user of PLL voltage awesome you can hit so high without amazing stuff

Thanks guys... now I just need to find a really strong 2600K to match... (~55x/56x?).

[coolhandluke41]

here is my submission before i sand this MB for replacement
cooling-water (ambient temps 77F)
batch#L040B671



Uploaded with ImageShack.us

[zsamz_]

You haven't read the rules.

? i'm missing temps?

[zalbard]

? i'm missing temps?

Nah, just one small line, really...

Screenshot must show a LinX window (max memory settings, click "All" button or pick the last memory size option from the drop down menu, the "All" option is highly recommended) either running the 20th+ loop with no errors, or with 20+ successful passes.
(Update: 14 Dec, 2010) Please make sure that LinX is running / calculating (21st or higher number loop) when you're taking your screenshot (on at least one of your screenshots). You obviously want a CPU-Z window with 4.5GHz+ (5GHz+ for Sandy Bridge) frequency on the same screenshot, as well.
This rule will be enforced for all the new submissions.

Well, and a small reminder in the very same first post as well...

REMEMBER TO MAKE SURE THAT LINX IS STILL RUNNING (THAT IT HAS NOT STOPPED) WHEN YOU ARE TAKING YOUR SCREENSHOT(S). OTHERWISE YOUR SUBMISSIONS ARE GOING TO BE INVALID PER THE RULE CHANGE OF 14TH OF DECEMBER, 2010.
THANK YOU FOR NOT MISSING THIS ONE!!!

Clearly, this is pretty much impossible to miss.
Like I said, you have not read the rules.

[zsamz_]

hope i got it right this time lol
evga classified e760 /phase/3849b018