Intel 4.5GHz & 5GHz LinX Stable Club

**_AntLionBR_** · 10-01-2010 01:52 PM

One question: What would the ideal (Problem Size) value to test only the processor into LinX? Thanks!

**miahallen** · 10-07-2010 10:03 AM

Hey, I've got a new entry....this one really suprized me. It's been in my daily rig for over a year, and I always though it a bit of a dud that ran too hot. Well, that may have been true on air cooling. But I threw it under water to test it for it's future owner and found it to be a very solid chip with proper cooling. The new owner will be happy

batch # - 3851A231
mobo - Classified E760
cooling - FFF&FM
Vcore @ 1.5V - LLC enabled

**FlanK3r** · 10-07-2010 09:45 PM

4500 under watter is good

**zalbard** · 10-10-2010 06:11 AM

Xtremely nice submissions, guys!

miahallen, I have a question for you.

Originally Posted by miahallen

I finally dialed in some nice 24/7 settings for this chip...I'm pretty impressed with this setup, with the high QPI, the high mem speeds, and a full 4GB test....and with more limited cooling

There is another submission of yours with this chip (I presume), but with a higher CPU clock:

Originally Posted by miahallen

Quick update to put me at the top of the 2C/4T list

The last submission is of course very impressive due to the casing and limited cooling you used. So what would you like me to do with it? I can replace your old one on the list, if you like. Or add an additional entry to the list. Or just leave it alone. Your call.

Originally Posted by _AntLionBR_

One question: What would the ideal (Problem Size) value to test only the processor into LinX? Thanks!

You are bound to be stressing memory either way. You can not do much about it. Just use lowest memory multiplier and relaxed timings to reduce the stress.

**miahallen** · 10-10-2010 06:31 AM

zalbard....NBD for me either way. I say leve up the bigger number. To someone stumbling accross the thread, it's a more impressive number I think

**zalbard** · 10-10-2010 06:36 AM

Originally Posted by miahallen

zalbard....NBD for me either way. I say leve up the bigger number. To someone stumbling accross the thread, it's a more impressive number I think

Oh, I concur. I for one am very impressed.

**dragonhunter** · 10-10-2010 09:31 AM

| 1.5125V | ASUS Rampage Extreme | Vapo LS Phase |

**zalbard** · 10-10-2010 09:50 AM

That's a really nice E8400! What were your temps?
And welcome!

**Cookiesowns** · 10-10-2010 02:35 PM

It seems like LINX doesn't really stress the GT's as hard as Prime does with HT is enabled. 6C/12T

Edit: Just downloaded the latest with updated binaries. Trying them now, Hope I succeed

**dragonhunter** · 10-10-2010 04:07 PM

Originally Posted by zalbard

That's a really nice E8400! What were your temps?
And welcome!

IDK
core temp always show 19C
My Evaporator temp show -57C idle and 51 Load

**sacoolza** · 10-12-2010 06:14 AM

CPU: Core I5 -750 #L006C024 @4507Mhz
M/B: ASUS Maximus III GENE
VGA :Galaxy GTX260
Ram: G.Skill RH 2000@1717
Power Supply : Tagen BZ800w
Case : HAF922 Fan CM90CFMx2 + Delta AFB1212SHE 1.6Ax1
Cooling : Water Cooling [ HK3.0LT + P655 + BI XFlow gt240 + Fan DeltaAFB1212SHE 1.6A X 2 ]

Room temp 20c

V.core 1.56875v / IMC/VTT 1.431v / PLL 1.8v / V.RAM 1.56v

**famich** · 10-13-2010 10:26 AM

Hello, Zalbard

first of all, many greetings and thanks for your diligent work on this thread :

XEON W3520/batch 3848A352 / ASUS R3E BIOS 0802 / custom WC-
HHPS+ pump ,2 radiators , XP Fluid Pro

**PolRoger** · 10-14-2010 08:41 AM

Originally Posted by famich

Hello, Zalbard

first of all, many greetings and thanks for your diligent work on this thread :

XEON W3520/batch 3848A352 / ASUS R3E BIOS 0802 / custom WC-
HHPS+ pump ,2 radiators , XP Fluid Pro

Good work!... low load vcore with vdroop enabled and nice batch chip. Temps? Triple channel?

**M_T_M** · 10-15-2010 12:02 AM

What could be wrong with what I write error

**AceBaran** · 10-15-2010 01:43 AM

Originally Posted by M_T_M

What could be wrong with what I write error

Give more info please.. What speed u running ? what are your volts ? is HT on ? what ram timings etc...

**M_T_M** · 10-15-2010 02:14 AM

I have i7 980x 4.5ghz, 1.4V and HT is on. I have Corsair Dominator gt 2000mhz 8-8-8-8-24!

**AceBaran** · 10-15-2010 02:28 AM

Can you post e-leet so it shows your volts ! it is prolly vtt.. in my experience when linx stops after 1 loop mostly up vtt a notch solves it

**M_T_M** · 10-15-2010 02:31 AM

**M_T_M** · 10-15-2010 03:16 AM

I grew Cpu Vtt +300mv. Now I have a problem with the memory!. In bios I have the DRAM Voltage 1.52V, maybe this is wrong!

**zalbard** · 10-15-2010 03:18 AM

Originally Posted by M_T_M

I grew Cpu Vtt +300mv. Now I have a problem with the memory!. In bios I have the DRAM Voltage 1.52V, maybe this is wrong!

Perhaps you have a swap file disabled?

**M_T_M** · 10-15-2010 03:23 AM

I am not in the settings nothing worked! I made only on the ALL and press START!

**famich** · 10-15-2010 03:51 AM

Hi,

double channel- temps were 61-62 - like that, but I do not have MORA etc "supercooling " , just two radiators.

Batch is 3848A352 ,

**famich** · 10-15-2010 03:54 AM

Hi,

could you, please, add me to the database ?

Thanks

PS: maybe I have posted too "tiny " screenshots

**zalbard** · 10-15-2010 04:57 AM

Originally Posted by famich

Hi,

could you, please, add me to the database ?

Thanks

PS: maybe I have posted too "tiny " screenshots

I will once I am at home. Nobody panic.

**famich** · 10-15-2010 06:13 AM

Great, thanks

Thread: Intel 4.5GHz & 5GHz LinX Stable Club

Thread Tools

Search Thread

Rate This Thread

Display

Xeon w3520

@pol reoger

@Zalbard

Thx

Tags for this Thread

Posting Permissions