Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Why don't you start your own club, then? See how many people want to run 250 loops while sitting at the PC and carefully listening to the music for hours at a time looking for stutters (and do you want them to post 10+ hour recordings of their music playback?)...
I think my requirements are reasonable. Seeing as I've got around 200 people join, I guess I'm not the only one thinking that way.
You are posting a lot of assumptions about an SR-2 setup. Looks like you don't have one. So why are you so bothered?
Let's not discuss what's stable and what's not here. I've never claimed ultimate stability. Just sufficient one. I think this discussion belongs to a different thread.
And what is this "Lynx" you keep talking about?
wanna also join
Sauron_Vie | Core i7 2600K [4C 8T] @ 5026.0MHz | 1.48 | Asus P8P67Pro | Water | L039B470
for my taste this is a little bit too much vcore.. have to play around
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
That's on the button for me C-N.
Like the reference to posting 250 loops.
PS
Further to the above I've now been running LinX for two and a half hours and am just passing 180 loops. I would post pics but my computer has flatly refused to have anything to do with me and is only continuing because I have threatened to force installation of a floppy disk drive (errrr, not that there is anything wrong with floppies.....)
Last edited by newhit; 03-18-2011 at 07:05 AM.
Sig always changing .
New formatting draft, still experimenting. Too bad the code window is so damn narrow. Wish I could change the width.
Code:# Member name CPU Info [# cores, threads] vCore Motherboard * Batch 1. Yoshimura Ci7 2600K [4C 4T] 5302.1MHz 1.512 GBT P67A-UD4 W L042B076 2. Ace. Ci7 2500K [4C 4T] 5300.0MHz 1.568 ASU P8P67 WS W L047B217 3. lkozarov Ci7 2600K [4C 4T] 5153.5MHz 1.548 GBT P67A-UD4 P L045B005 4. st0ned Ci7 2600K [4C 8T] 5100.2MHz 1.424 ASU P8P67 EVO W L042B076 5. dragonhunter Ci7 2600K [4C 4T] 5100.5MHz 1.488 ASU P8P67 DLX W L042B243 6. beast200 Ci7 2500K [4C 4T] 5088.8MHz 1.456 ASR P67 XTR 6 W L046B582 7. AUGieDogie Ci7 2600K [4C 4T] 5076.0MHz 1.456 ASU P8P67 EVO A L041C106 8. crossg Ci7 2600K [4C 4T] 5022.8MHz 1.416 ASU P8P67 DLX A L038A660 9. Cy4n1d3 Ci7 2500K [4C 4T] 5004.0MHz 1.424 ASR P67 XTR 4 A L041B789 10 C-N Ci7 2500K [4C 4T] 5001.5MHz 1.368 GBT P67A-UD5 W L050A864 11 l0ud_sil3nc3 Ci7 2600K [4C 8T] 5000.1MHz 1.488 ASU P8P67 PRO W L050A864Lemme know what you guys think!Code:* cooling type: A = Air, W = Water, C = Chilled Air / Water, P = Phase (Cascade, Single Stage, etc), D = Dry Ice, L = LN2 / LHe! *laughs*
Last edited by zalbard; 03-18-2011 at 02:42 PM.
i like
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
like it also
@zalbard: i passed now linx with 5,2ghz. should i edit my post above or should i post the screens again ?
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
ok, thx for the quick reply
here we go:
Sauron_Vie | Core i7 2600K [4C 8T] @ 5200.0MHz | 1.568 | Asus P8P67Pro | Water | L039B470
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
You don't need to listen to music for the 250 loops run,just play couple of times a clean music mp3 while testing to check qpi stability. Mine are not assumptions anyway but based on real experience. You say let's not discuss what's stable and what's not here,but the name of your thread is "Intel 4.5 GHZ & 5 GHZ LINX STABLE CLUB". SO i was pointing out that your requirements don't give any warranty of Lynx stability,since IF you had read the readme.txt in Lynx you would have seen that to call stable a system at least 50-100 passes with all logical cores at work are needed. I say that this discussion belongs to this thread
This is the link to my build in evga modrigs if you are interested.Later when my scandisk finishes on my desktop i will post the screenshot you asked as proof that i own such system even if yours seems just a childish provocation.Infact i don't understand how my statements would be less right even if i was running a downclocked pentium pro since before quoting my experience i quoted the readme included with the installer of lynx:
http://www.evga.com/ModsRigs/detail.aspx?BuildID=22992
Last edited by Grinchy; 03-18-2011 at 11:26 AM.
Last edited by l0ud_sil3nc3; 03-18-2011 at 11:45 AM.
Number of passes depends upon ho powerful the system is.I talked about 250 passes for my system.i should have been more precise and talk about time.10-12 hours is the time that is needed to really call a system linx stable. Secondly loudsilence it is not me the tard cause i make a typo, if you want to spot a tard go check your comment under your pic.I didn't sya you got to listen music for 1010101010 hours just a couple of times while testing and 10-12 hours is not unreasonable as stabilty testing time.Of course if your purpose is just to have your selfesteem enhanced by the illusion of being linx stable go on like this otherwise show a bit more respect and reply with arguments and not with dubious taste names calling.
What do you want me to do, then? Rename the thread to "Intel 4.5GHz & 5GHz LinX Seemingly Stable Club"?
You can still run 250 passes and join the club, btw. 20 is just the minimal accepted number.
"Reasonable" stability testing time varies from person to person, btw. Some think that doing more than 5 is unreasonable. I am personally content with 20-25. I don't run anything even remotely as stressful as LinX during the normal usage.
I still don't see why you don't start your own club instead of changing this one. It is much easier since I am not really inclined to change the rules.
Last edited by zalbard; 03-18-2011 at 11:44 AM.
i don't know the thread is yours maybe just raise the requirements to the ones suggested by the readme...and you will see that your club will become even more exclusive and that lot of skills in settting will be required other than a good chip.For example for those who run evga mbs it will be needed to mess with signal tweaks once they pass a certain bclck,with ich settings( to give stability to usb or devices connected to the chipset) and so on. dobroi vicer
edit:Then don't change anything.thread is yours...but the tag "linx stable" is not correct.that'sall. Cheers to everybody
Last edited by Grinchy; 03-18-2011 at 11:55 AM.
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
1 run linx stable doesn't mean anything.you call something stable according to a certain program if executing that program results in stable operation and this mean that it doens't crash,NEVER.period.
It doesn't exist stability if after 50 loops it crashes .That's what i was pointing at.Stability with a certain program exists if it never crashes no matter how long time it is left running. SO you cannot say i am 20 run linx stable.You can say that you can run 20 linx run without errors but to be able to say that you are linx or prime stable you must be able to leave those programs running an indefinite amount of time without having errors.Usually this time is estimated to be 10-12 hours for IBT/Linx . I don't understand why all this fuss about smth that is written on the very same readme of linx.Is this discovery putting in doubt the self esteem of some due to their e-penis not so rock-solid as they thought?
You are so stubborn!
How would you feel I if came and started rearranging furniture around your house???
Leave this club alone.
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
Just picked up a 990x this evening.. just learning the Gulftown.. but looks like a keeper. I am able to boot into windows @ 5100mhz without any hassle hopefully I have enough left to make the 5ghz club at some point..
Can you please add me to the Gulftown table (I think I have everything):
needforspeed| Core i7 990X [6C 12T] @ 4835.5MHz | 1.535 | ASUS Rampage III Extreme | Water | 3045B094
Last edited by needforspeed; 03-18-2011 at 09:15 PM.
Case: M.M Ascension C.S
MB: Asus RIVE
CPU: 3960 24/7: 4900 @1.43v
Ram: 16 gig Dominator Platinum 2133 series ,@2450hmz 10.11.11.28 1.5v
Drive: OCZ RevoDrive 3 X2 240GB
Cooling: 2 x 560 SR1 + 1 X 280 SR1 single loop
Aquaero 5 w/NB PK3 Fans @ 900rpm. Koolance 380i w/. MCP355 x 2 XSPC top
Video: Titan Hydro Copper x 3 SLI
PS: 2 x Corsair 1200w
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
Rig 1
CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
Rig 2.
CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.
I've got an AVX run for submission..........
Sig always changing .
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
Bookmarks