Intel 4.5GHz & 5GHz LinX Stable Club

[andressergio]

ur GFlops is lower than my 4.5Ghz HT on ~ 59GFlops

he must be using older linx library...see that also Gflops are not even

[lkozarov]

It was my second run at the same freq. Furst time it was 61 Gflops, but I used lower Vcore, Vmem and Vtt and the systeme crashed on 13-14 loop.

[deachus]

i7 920
Batch: 3918A495
Custom SS
Foxconn Bloodrage GTI

What was your vCore, vQPI, CPU PLL set in bios?

[lkozarov]

CPU Vcore +160mV
CPU Vtt +140mV (Everest read 1.3V) I guess you mean QPI/DRAM
CPU PLL 1.617V
IOH Core 1.18V
IOH VCCA 1.168V

[Alexxx650]

I can not say what is the processor - NDA.
Cold water - MB, VGA, CPU & RAM.
wanted to go to 5050 MHz, but at 6 minutes got an error, so that the 5000 MHz beautiful number for the club from 4500 MHz, it is time to open the 5000 MHz LinX Stable Club

[kitfit1]

E8600
Batch no Q820A727
Custom SS cooling
DFI UT P35 T2R
1.568 Vcore
5.153ghz

Real Temp was a waste of time because the evap temp never moved from -58c the whole time.

[zalbard]

Very impressive! Great job, guys!
Updating in a bit.

[Alka Holic]

Zalbard I forgot to post cooling information for my submission to the 4.5 club,
below is what I am running 24/7 at 4.6 ghz.

Batch: 3032A340

Pack Date: 10/14/2010

MB: Rampage 3 Extreme 1102 bios

Voltages:

CPU Load Line Calibration set to Auto
QPI Load Line Calibration disabled

Vcore: 1.34375 actual reading 1.336 with ROG
CPU PLL: Auto actual reading 1.812 with ROG
VTT: Auto actual reading 1.330 with ROG
DRAM: 1.64 actual reading 1.641 with ROG

Cooling: H20-220 Ultima XT Plus

[miahallen]

Just in case anyone is looking, there is a 3849B*** for sale here: http://www.overclock.net/main-compon...18-lapped.html

[Church]

Cpu should be called golden when it's able to show such results unlapped imho.

[OC Nub]

Taking a break from x58, decided to give this 655k another try. P55A-UD6, 2x1gb Kingston HyperX, water cooled. Failed at 17 passes, next time 18, finally got it to pass, vcore is way high.

[andressergio]

Taking a break from x58, decided to give this 655k another try. P55A-UD6, 2x1gb Kingston HyperX, water cooled. Failed at 17 passes, next time 18, finally got it to pass, vcore is way high.

jeeeze mate almost 5ghz linx

that chip deserves to be on ya Xmas tree

congrats !
Sergio

[OC Nub]

Thanks Sergio.

[ZoLKoRn]

Core i7 980X (3013A524) - 4500.4MHz
EK Supreme HF-CU+HL480X+MCP355+xspc top res+NMB-MAT : room 26C
GIGABYTE X58A-UD9
A-DATA 2000G V2

[Shiranui Gen-An]

Core i7 980X (3013A524) - 4500.4MHz
EK Supreme HF-CU+HL480X+MCP355+xspc top res+NMB-MAT : room 26C
GIGABYTE X58A-UD9
A-DATA 2000G V2

Tried raising QPI PLL to see if you can lower your vcore?

[andressergio]

Core i7 980X (3013A524) - 4500.4MHz
EK Supreme HF-CU+HL480X+MCP355+xspc top res+NMB-MAT : room 26C
GIGABYTE X58A-UD9
A-DATA 2000G V2

very nice mate cool chip for 26C ambient

[AceBaran]

Finaly with bios 0095 she is stable @ Bclk 215.. gonna run more tests @ lower volts

[ZoLKoRn]

Tried raising QPI PLL to see if you can lower your vcore?

Thanks for info and i'll try about your suggestion hope it can helped

very nice mate cool chip for 26C ambient

Thank you mate ! yep this is good chip for air or water cooling but not good for
sub-zero

[]siNNer[]

I'VE FINALLY DONE IT!!

i7 920 @ 4600 (21x219) HT OFF 1.472v on air, no tricks and with case closed.

I guess i can lower the vcore, 1.472v was just to be sure it would be enough.

]siNNer[ | i7 920 [4C 4T] @ 4600MHz | 1.472 | Gigabyte X58A-UD3R | Air (TR Venomous X) | 3945A927

[Kimofil]

I'VE FINALLY DONE IT!!

i7 920 @ 4600 (21x219) HT OFF 1.472v on air, no tricks and with case closed.

I guess i can lower the vcore, 1.472v was just to be sure it would be enough.

]siNNer[ | i7 920 [4C 4T] @ 4600MHz | 1.472 | Gigabyte X58A-UD3R | Air (TR Venomous X) | 3945A927

What is you ambient temps?

[]siNNer[]

What is you ambient temps?

Around 20ºC. I'm using a Thermalright Venomous X with 2 Scythe Slipstream 1200rpm push/pull. Quiet and cool

[Kimofil]

Around 20ºC. I'm using a Thermalright Venomous X with 2 Scythe Slipstream 1200rpm push/pull. Quiet and cool

Nice! I using same cooling, but my Slipstream's at 2000rpm
What is you max stable clock with HT enabled?
I try 4.2 HT on-stable at 1.34Vcore, but temps under LinX is 88C at 25C ambient.

[lkozarov]

i7 920 - HT Off
Batch: 3918A495
Custom SS
Foxconn Bloodrage GTI

[]siNNer[]

Nice! I using same cooling, but my Slipstream's at 2000rpm
What is you max stable clock with HT enabled?
I try 4.2 HT on-stable at 1.34Vcore, but temps under LinX is 88C at 25C ambient.

For 4.2 HT ON I only need 1.276v. My max HT ON on this cooling is 4400MHz with 1.392v, temps around 85ºC.

[Exia]

My System
Cpu : Intel Corei7 930 HT On Vcore 1.525
MB :asus RamPage 2 Extreme Bios 1914
Ram : Kingston HyperX Bus1866 3*2GB (BBSE Chip)
Cooling : Water Cooling
PowerSupply : Gigabyte Odin 550W GT