Intel 4.5GHz & 5GHz LinX Stable Club

[zalbard]

Can you correct my username on the core i5 & i7 list? YOu have daeachus and it should be deachus. Number 43 i believe.

Done.

Sorry, man, such stuff happens all the time, I am working with a fecking huge notepad file here to edit all the stuff, you don't wanna see it...
In fact, neither do I!

[Sniper]

I dont envy you or the job with keeping this thread up to date. But we all appreciate it very much, so thanks for all the hard work

[zalbard]

I dont envy you or the job with keeping this thread up to date. But we all appreciate it very much, so thanks for all the hard work

You guys are worth it, your submissions and effort are outstanding!

[some_one]

some_one | i5-655k [2C 4T] @ 4512MHz | 1.4125 Vcore L1 | Gigabyte P55UD6 | Mega, Warm Air (33C)



Using just physical cores with HT still enabled results in higher GFLops and lower power / heat. The dual core difference doesn't seem as pronounced as the higher multicores.

[OC Nub]

I dont envy you or the job with keeping this thread up to date. But we all appreciate it very much, so thanks for all the hard work

+1

Thanks for taking the time to keep this great thread going.

[zalbard]

Thanks for taking the time to keep this great thread going.

Hope you noticed that I added an extra requirement you requested to the OP.
I think it's actually a good idea. Thanks!

[deachus]

Done.

Sorry, man, such stuff happens all the time, I am working with a fecking huge notepad file here to edit all the stuff, you don't wanna see it...
In fact, neither do I!

No worries, I would like to thank you for your efforts in keeping this thread up to date.

[OC Nub]

@zalbard-Awesome!!! Thank you very much, I just noticed that.

I need to give info for my e8400 run, didnt notice that I hadnt before.
Gigabyte EP45-DQ6, Water, Will have to find the chip top get batch#.

Also the last entry for i7-920 4828mhz was the same chip that I used for 4725mhz, 3937B785. It is slowly degrading.

i7-870 batch# is L926B294

[Shiranui Gen-An]

Shiranui Gen-An | i7 980x [6C-12T]@4498MHz Batch #3005F803T | 1.435v | EVGA E762 4-Way Classified | Air (Venomous X+2x Scythe Ultra Kaze 2000RPM)

With the insanely cold temperatures we've been having in the Atlanta area lately, I decided to give 4.5GHz with HT on another go. I set up my Classified in the garage which currently has an ambient temp of about 11.6°C. It was able to pass 20 runs of LinX at the same vcore that my previous HF-off run needed. I did bump up QPI PLL voltage so this may have had as much of an influence as the low temps.

[zalbard]

Everyone, please make sure to read the changes in the OP carefully before submitting the results. You have to post a screenshot with CPU-Z and LinX running 20th+ pass (means it's still in progress).
Thank you.

[the_real_7]

I agree this a great idea zalbard prove it if you can pass it 20 times , time to open my windows turn Ht off and slam this baby

[Johnny87au]

@Shiranui Gen-An its the 4.5ghz club

[owikh84]

Shiat! means hv set alarm at 1hour to take screenshot.

[zalbard]

Shiat! means hv set alarm at 1hour to take screenshot.

All the previous results get to stay, though. But yeah, might prove to be a bit more complicated in this case.

[OLDcomer]

OLDcomer | C2Q Q9650 [4C] @ 4599MHz | 1.424 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | L826B006

[Hoss331]

Very nice run

[l0ud_sil3nc3]

OLDcomer | C2Q Q9650 [4C] @ 4599MHz | 1.424 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | L826B006

very nice especially for a yorkie, I know how hard it is to get on in this club

[deachus]

OLDcomer | C2Q Q9650 [4C] @ 4599MHz | 1.424 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | L826B006

Great job with a Yorkie

[PolRoger]

Third submission... i7 920 #3849B018

Ambient temps... ~ -1 C.

Cooling: Air... Megahalems with push/pull.

Vdroop enabled (LLC disabled).

Load:

Voltages measured with my Fluke during load:
Vcore: ~ 1.322v
Vtt: ~ 1.288v
DRAM: ~ 1.634v

Idle:


With the exact same settings and HT enabled I could only net ~ 4.44GHz.
I've had no luck so far with various settings in getting a succesful 20 pass LinX HT at 4.5GHz (the best attempts so far have the o.c. failing between 10 to 15 passes).

Load:

Voltages measured with my Fluke during load:
Vcore: ~ 1.314v
Vtt: ~ 1.286v
DRAM: ~ 1.630v

Idle:

[C-N]

Very nice OLDcomer

&

PolRoger... nice low vcore -1oC Brrrrrr

.

[andressergio]

Done.

THANKS MAN now i got my place on the I7's grid my first one

[andressergio]

some_one | i5-655k [2C 4T] @ 4512MHz | 1.4125 Vcore L1 | Gigabyte P55UD6 | Mega, Warm Air (33C)



Using just physical cores with HT still enabled results in higher GFLops and lower power / heat. The dual core difference doesn't seem as pronounced as the higher multicores.

mate what is that program realcore ?

[lkozarov]

i7 920
Batch: 3918A495
Custom SS
Foxconn Bloodrage GTI

[GunGod]

OLDcomer | C2Q Q9650 [4C] @ 4599MHz | 1.424 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | L826B006

i7 920
Batch: 3918A495
Custom SS
Foxconn Bloodrage GTI

cooool job guys

[owikh84]

i7 920
Batch: 3918A495
Custom SS
Foxconn Bloodrage GTI

ur GFlops is lower than my 4.5Ghz HT on ~ 59GFlops