4770K and 3770k
MVI Gene and MV Gene
2 kits TeamX 2400Mhz 2x4GB @ 2600Mhz 10-12-12--28-1T
Asus 670GTX DCII
Corsair AX1200 ~ Corsair TX850
(2) OCZ Vertex 4 RAID0 ~
Samsung BluRay Burner SH-B123L
800D~EK Supreme HF Nickel~EK Coolstream 360~BP Matte Black Modded MCP655
BP Mod Top V2~EK Res~Distilled Water~Silvercoils
wanna see some action with air cooling? roomtemp ~20°C
cooled with Prolimatech Megalems and 1 120mm Noctua fan
Edit: Power measurement
- i5-2500K 4.8GHz @ 1.376v (idle 1.6GHz @ 1.40v)
- 8GB DDR3-1600 CL7 @ 1.60v
- P67 Mainboard
- 2 * MSI GTX460 1GB Cyclone (2D)
- 500GB Samsung SATA HDD
- 3 * 120mm Fans
- Zalman Fanmate
- Seasonic X-750W NT
Idle @ Desktop (81W)
100% load with LinX (193W)
Last edited by Chri$ch; 12-09-2010 at 04:32 PM.
Oh yea, I had that working with my R3G. Its nothing too special. Just a different front end for the same app you have with all the other apps integrated into it like ProbeII etc. I'll admit it does look nice tho. I just didn't like all the other stuff installed so I removed the suite and just installed TurboV Evo
@chrisch is that ur cpu ?
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
yea, otherwise i wouldnt show screens
Higher memory usage actually seems beneficial to higher GFlops. It is supposed to be a stress test primarily and therefore using HT with it's lower result in GFlops is the right way IMO simply because it uses more power / generates more heat. At least in my tests it has. Typically my 860 with Linpack will run ~15% slower but use ~10% more power while using 8 threads over using 4 threads on separate physical cores with HT still enabled. IMO though it's also nice to know what sort of performance can be expected which is difficult if the resulting GFlops are skewed by bugs.
One thing i did find is that if OC'ing from Windows there is a possibility of wrong readings depending on the timer used which can result in lower than real readings when BCLK is increased. Rather than have an example showing lower clocks it is more obvious reducing BCLK as this will result in higher than real GFlops.
Example of incorrect reading using dual core with HT. BCLK dropped from 100MHz to 50MHz. In case your wondering, no I don't normally run the memory clock or BCLK that low .
Normally at 4.5GHz this dual core would be a little under 30GFlops.
Not sure what CPU this is...
Intel i7 920 C0 @ 3.67GHz
ASUS 6T Deluxe
Powercolor 7970 @ 1050/1475
12GB GSkill Ripjaws
Antec 850W TruePower Quattro
50" Full HD PDP
Red Cosmos 1000
Damn you guys with your teasing! I am trying to save up on some GPUs here!
Seriously, though, looks awesome, and very promising. And just think about golden retail samples...
SB can't come soon enough!
Last edited by zalbard; 12-10-2010 at 09:38 AM.
golden retails = 5GHz aircooled below 1.4v vcore
Being Tweaked
ASUS Maximus V Forumla Bios 1408
Intel Ivy Bridge 3770k UNLIDDED
4.8 ghz EK Supreme HF Block 1.38v
Dominator Platinum 2666MHz 11-13-13-35
EVGA Titan eK bLOCK
Corsiar AX850W
Samsung 840 Pro 256GB C:/ OS
Samsung 840 Pro 512GB D:/ Game:
Western Digital Black WD4001FAEX 4TB 7200 RPM 64MB E:/ Data
Western Digital Black WD4001FAEX 4TB 7200 RPM 64MB F:/ Data
X-Fi Titanium Fatal1ty
Windows 7 PRO 64bit SP1
Another cpu submission for my W3540...
Batch #3845B010
Ambient temps: 6/7 C.
Cooling: TRUE Black with push/pull.
LLC @ 100%
Load:
Voltages measured with my Fluke MM during load...
Vcore: ~ 1.423v
Vtt: ~ 1.346v
Idle:
This chip normally overclocks nicely with pretty decent (low) volts but it seems that at 4.5GHz+ the IMC gets rather weak and quite fussy. I found it difficult to get a successful 20 run LinX. I did try to pass with HT but had no luck... perhaps too much stress for the IMC?
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
Now with UD4 and also air...
voltage reading is wrong in CPU-Z but ET6 shows it correct
@chrisch can u run some vantage benches and some super PI scores for comparison hehe
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Nice Chri$ch, 4.81 @ 1.38v aircooled. Insane.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
what a retail can do will i see in a few minutes
http://www.awardfabrik.de/forum/show...&postcount=124
Last edited by Chri$ch; 12-19-2010 at 02:53 PM.
1.3V is hardly insane and not quite enough for 4.5GHz on these.
Intel i7 920 C0 @ 3.67GHz
ASUS 6T Deluxe
Powercolor 7970 @ 1050/1475
12GB GSkill Ripjaws
Antec 850W TruePower Quattro
50" Full HD PDP
Red Cosmos 1000
Hi!
What is considered max safe voltage for SB on air - for benching and for 24/7?
My retail i7 2600K (batch: L038A646) is doing 4.6GHz 1.332V load, 1.344 idle in Win, 1.35V in bios, temp in low 70s, HT on.
i7 2600K /TRUE Black|Gigabyte P67A-UD4|4GB G.Skill ECO 1600MHz CL7|Gigabyte GTX460 768MB OC SLI|Crucial RealSSD C300 64GB RAID0|Cooler Master Cosmos S|Enermax Revo85+ 850W
Bookmarks