Intel 4.5GHz & 5GHz LinX Stable Club

[OC Nub]

WOW , Nice chip SimpleTECH!!!

[Sniper]

Nice chip SimpleTECH, what is your ambient temp ?

[CryptiK]

Well this is my first I7 920 a very nice and cool chip

can i join the club ?

cheers
Sergio

Nice one, passed with i7 now

SimpleTECH | Xeon W3520 [4C 8T] @ 4619.7MHz | 1.440 | Gigabyte X58A-UD5 | Water | 3845A935

http://img696.imageshack.us/img696/9...201440vf7d.jpg

Even with two quads, this chip still runs hot. Need to get some extreme cooling or wait for it to get colder in my basement.

That hot with 2 quads huh, toasty chip. Did the second rad help much?

Mines at the limits of a single quad & EK HF at 4.5GHz on a cold night, temps approach 90*C at ambients around 20*C.

[Presretach]

SimpleTECH,
that you can write settings for 220 BCLK for UD5?

[Sniper]

Mines at the limits of a single quad & EK HF at 4.5GHz on a cold night, temps approach 90*C at ambients around 20*C.

That was high, with 2x 360 rads and fairly quiet fans I can do 4620 HT with temps between in mid 70's.

[zalbard]

That hot with 2 quads huh, toasty chip.

Probably bad IHS contact, a lot of i7 chips have that.

[deachus]

deachus ~ 920 D0 @ 4523MHz ~ vcore 1.393 ~ vQPI 1.425 ~ CPU PLL 1.457 ~ REXIII ~ 3913A330 ~ Water

[SimpleTECH]

WOW , Nice chip SimpleTECH!!!

Thanks!

Nice chip SimpleTECH, what is your ambient temp ?

About 68°F (20°C)

That hot with 2 quads huh, toasty chip. Did the second rad help much?

Mines at the limits of a single quad & EK HF at 4.5GHz on a cold night, temps approach 90*C at ambients around 20*C.

Probably an uneven IHS.

SimpleTECH,
that you can write settings for 220 BCLK for UD5?

Certainly, give me a sec.

That was high, with 2x 360 rads and fairly quiet fans I can do 4620 HT with temps between in mid 70's.

Probably bad IHS contact, a lot of i7 chips have that.

Yup.

[Sniper]

I lapped my 3845A935 and it helped a bit. Dont have the numbers anymore, but I think it was 5-6 degrees with a TRUE.

[andressergio]

Great results all ppl

Thanks Cryptik

[SimpleTECH]

SimpleTECH,
that you can write settings for 220 BCLK for UD5?

I know there are a few templates lying around but I felt kind of lazy so I took some pictures instead.

Hope this helps.

[Sniper]

Have you tried to lower CPU pll voltage SimpleTECH? It should allow you to also lower vcore and temps a bit. I use 1.5v on mine.

[Gorki]

I know there are a few templates lying around but I felt kind of lazy so I took some pictures instead.

Hope this helps.

Thanks.

Nice one!

[vodka3dg]

tried today.... even putting my rig directly below the AC unit wasn't enough to manage ambient temps lower than 26ºc

summer seems to be hitting hard this time... will try again another time, cause temps where getting higher thant 86ºC....

[Presretach]

@SimpleTECH
Thanks.

[tompc3]

Hi Guys
fooled around for a little while this afternoon and here are my numbers all air cooling
Classified 3 mobo, 980x batch #3032A340

[andressergio]

tried today.... even putting my rig directly below the AC unit wasn't enough to manage ambient temps lower than 26ºc

summer seems to be hitting hard this time... will try again another time, cause temps where getting higher thant 86ºC....

will be hard mate at those temps your batch is way hotter than mine

better wait for cooler ambients to try

best of lucks
Sergio

[SimpleTECH]

Have you tried to lower CPU pll voltage SimpleTECH? It should allow you to also lower vcore and temps a bit. I use 1.5v on mine.

I tried but 1.800v was the lowest.

I'll try tweaking a bit later.

I left my window open during the night and saw a 4°C drop in temperatures.



Bring on the colder weather!

[donmarkoni]

Do I get a cookie for lowest MHz 100GFLOPS run?

donmarkoni | i7 980X [6C 6T] @ 4560MHz | 1.425 | Rampage III Extreme | Water (ambient 26°C) | 3013A472

[Church]

donmarkoni: 36V core voltage?

[DomagojX]

@churcy:

i7 980X [6C 6T] @ 4560MHz[/URL] | 1.425 | Rampage III Extreme | Water

It's a bug

[donmarkoni]

It can handle up to 60V



j/k
as domagojx said, it is a bug, but funny one.

[Shiranui Gen-An]

Shiranui Gen-An | i7 980x [6C-6T]@4511MHz Batch #3005F803T | 1.435v | EVGA E762 4-Way Classified | Air (Venomous X+2x Scythe Ultra Kaze 2000RPM)

Looks like what they say about F-batches needing more volts is true. I couldn't do it with HT enabled in my limited testing, would probably take 1.45v+ which isn't really safe on air methinks.

[nickless]

Second try with HT off
Xeon W3520:
4C 4T
batch# - 3845A935@4651MHz
mobo - RIIIE
cooling - water: EK-Supreme HF, MCP355, Magicool Xtreme III
vcore @ 1.422V
Room T - +18*C
during test and after

[donmarkoni]

Here is another one, but this time with HT enabled.

donmarkoni | i7 980X [6C 12T] @ 4522.6MHz | 1.4375 | Rampage III Extreme | Water (ambient 11°C) | 3013A472

I forgot to do a CPU-Z validation, but I hope it doesn't matter.

EDIT: For those wondering about temps, it is on water, but with open windows and ambient dropped by 15 degrees compared to previous run.