F3-16000cl9t-6gbtd & X58-ud5

[Hiuptime]

Good Afternoon All.

Has anyone had experience of the F3-16000CL9T-6GBTD kit combined with a Gigabyte X58-UD5? I'm having stability issues with the above combination. Any advice would be appreciated.

Regards,

Steve.

[GSKILL TECH]

Try the following settings:

CPU Clock Ratio - 14x for 2.8GHz
QPI Link Speed - AUTO
Base Clock Control - Enabled
BCLK Frequency - 167
Performance Enhance - Standard
Extreme Memory Profile - Disabled
System Memory Multiplier - 12

Uncore & QPI Features
Uncore Frequency - 4008

DRAM Timing Selectable - Manual

CAS Latency Time - 9
tRCD - 9
tRP - 9
tRAS - 24

Enter these for the other three as well.

Channel A Timing Settings

Advanced Timings

Command Rate - 2


Advanced Voltage Control
Load-Line Calibration - Disabled
CPU Vcore - 1.30V
QPI/VTT Voltage - 1.30V
CPU PLL - 1.900V

PCIE - AUTO
QPI PLL - 1.300V
IOH Core - 1.400V
ICH I/O - 1.600V
ICH Core - 1.300V
DRAM Voltage - 1.640V
Rest to AUTO

Keep me posted on the results and I will be able to further assist you.

Thank you
GSKILL SUPPORT

[Hiuptime]

Thanks for your reply.

I'll try your suggested settings.

Regards.