DFI X58 UT T3E-H8 fullcover waterblock
DFI X58 UT T3E-H8 fullcover waterblock
basket
that was one of the reasons i went to classified and then this came..
damn..
nice.
I really like it. Custom made right? Post temps on oc'ed i7 and final shipped price plz
Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W
WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250
Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500
same here.
if the temps for the system are good
will revert back to dfi.
Woha, that sure looks sweet
"I don't have a masters degree, but even I know that mixing water and electronics is a stupid thing to do."
My girlfriend.
"It's easy to get sideways at first thinking there is ONE BEST product for each area of water cooling. But, that's not always the case - depends on your exact setup and needs."
shazza
Beautiful work....I want one.... Aluminum?
| Intel Core i7-2600K | ASRock P67 EXTREME4 GEN3 | G.SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866 | EVGA GTS 450 |
| Swiftech APOGEE Drive II CPU Waterblock with Integrated Pump | XSPC RX360 | Swiftech MCP655-B Pump | XSPC Dual 5.25in. Bay Reservoir |
| Thermaltake 850W PSU | NZXT SWITCH 810 | Windows 7 64-bit |
[SIGPIC][/SIGPIC]
Duniek, great full cover block and craftmanship.
I might upgrade to X58, will you be selling these blocks to people?
If it ain't watercooled, I don't wanna know.
Oh boy......I've been waiting for this
Will there be any for DK X58?
Last edited by dro; 11-05-2009 at 06:07 PM. Reason: i've waiting-> i've been waiting
Always wondered why no one has offered a full cover block for this board. Looks good too
looks friggin awesome, now when will the BR be released?
CPUID http://valid.canardpc.com/show_oc.php?id=484051
http://valid.canardpc.com/show_oc.php?id=484051
http://valid.canardpc.com/show_oc.php?id=554982
New DO Stepping http://valid.canardpc.com/show_oc.php?id=555012
4.8Ghz - http://valid.canardpc.com/show_oc.php?id=794165
Desk Build
FX8120 @ 4.6Ghz 24/7 / Asus Crosshair V /HD7970/ 8Gb (4x2Gb) Gskill 2133Mhz / Intel 320 160Gb OS Drive, WD 256GB Game Storage
W/C System
(CPU) Swiftech HD (GPU) EK HD7970 with backplate (RAM) MIPS Ram block (Rad/Pump) 3 x Thermochill 120.3 triple rads and Dual MCP355's with Heatkiller dual top and Cyberdruid Prism res / B*P/Koolance Compression Fittings and Quick Disconnects.
Someone on another forum said to me that most people who have removed the original heatsinks from this board and fitted waterblocks ended up with a dead board..
He said that the DFI board needed pressure over the entire PWM area of the board, otherwise it would die on the first run?!?!
This can't be true, right?
nickelplated copper
maybe , PM me
noone want it yet, so nope (if someone want ship to mobo to me or 5 ppl which want them then I can make)
for now I have mosfet block for DK x58
bcoz pain to make it, very small space between ram/pci-e and dumb placement of 3pin connector and other junk, lol
I guess it isnt true
I have the mosfet block for the DK version thanks to Duniek, AWESOME temps
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
Great job, Michal!
980X EE @4600Mhz - DFI LP JR T3H6 - 6x2GB corsair dominator & GT 2000c8 - 2x HD5870 - 2x corsair f40 - 2x F120 - OCZ vertex LE 100 - HX1000 -
swiftech XT - komodo5800 - 2x mcp655 vario - ek nb/sb5 - anfitec pwm017 - Hailea HC500a--(I need one komodo5800 too)
opteron170@3050MHz 1,39v---DFI LP UT CFX3200DR/G---mushkin redline XP4000 3-3-2-5-1T @508Mhz
Any updates on this? I pmed duniek about the availability, but has anyone seen any test results?
system:
i7 920 4.1 1.325
DFI t3eh8
Asus 5850
3x2GB GSkill Trident 2050 9-9-9-11 1.55v
2x74gb Raptor raid+0
4x640gb WD AAKS raid+0
PC Power & Cooling Quad Silencer 750W
Lite On 20x Sata DVDRW with light scribe
BENQ FP241W
modded Rocket Fish Aluminum Lian Li
Auzentech HDA X-Plosion (don't believe the hype...)
HW Labs Black Ice GTX 360 (3 Scythe 120mm fans)
Swiftech apogee xt
D5 vario
nb temps 38*C, SB 37*C
air about 65-70*C
Wow... You should start to mass produce these. I'm almost positive almost every owner of the dfi t3eh8 would buy this block. I know I would/will. I'm sure you'd have no problem selling at least 50 of these to start with.
system:
i7 920 4.1 1.325
DFI t3eh8
Asus 5850
3x2GB GSkill Trident 2050 9-9-9-11 1.55v
2x74gb Raptor raid+0
4x640gb WD AAKS raid+0
PC Power & Cooling Quad Silencer 750W
Lite On 20x Sata DVDRW with light scribe
BENQ FP241W
modded Rocket Fish Aluminum Lian Li
Auzentech HDA X-Plosion (don't believe the hype...)
HW Labs Black Ice GTX 360 (3 Scythe 120mm fans)
Swiftech apogee xt
D5 vario
vrm temp under load and in overclock???
Looks really nice!
I bought your DK block for my DFI JR x58, but haven't gotten around to putting it in my system yet.
@maanyak, from all the picks I saw of the DK, and JR, they seem to use the same exact mosfets, and heatsink... which is why I ordered Duniek's block. I'm 99.9% sure it will fit - I hope ;p
Desktop
[Asus Rampage III Gene] [i7 920 D0] [12GB OCZ3B2000C9LV6GK] [HIS HD 5970] [SeaSonic X750 Gold ] [Windows 7 (64bit)] [OCZ Vertex 30GB x3 Raid0] [Koolance CPU 360] [XSPC Razer 5970] [TFC 360 rad, D5 w/ Koolance RP-450X2]
HTPC
[Origen AE S10V] [MSI H57M-ED65] [ i5-661 w/ Scythe Big Shuriken] [Kingston HyperX LoVo 4GB ] [ SeaSonic X650 Gold ] [ OCZ Vertex 30GB SSD ] [ SAMSUNG Spinpoint 640GB 7200 RPM 2.5"][Panasonic UJ-225 Blu-ray Slot Burner] [ Ceton InfiniTV4]
Bookmarks