pop rivets for lian-li v2000/tagan black pearl

[Slave1974]

gonna break down my case and get to painting. What sized rivets do I need?

Performance-pcs.com has 1/8" x 1/4" as well as 1/8" x 1/2" black rivets.

I assume the 1/8" is how wide the round part is, and the 1/4, 1/2 is the length of the shaft on the rivet that passes through the hole.

Which one do I need to get?

[TheBlueChanell]

gonna break down my case and get to painting. What sized rivets do I need?

Performance-pcs.com has 1/8" x 1/4" as well as 1/8" x 1/2" black rivets.

I assume the 1/8" is how wide the round part is, and the 1/4, 1/2 is the length of the shaft on the rivet that passes through the hole.

Which one do I need to get?

I took apart my V1010 and got some black 1/4" ones locally. I haven't put it back together yet but I compared it to one of the stock rivets and it looks like a match.

You should try checking somewhere locally before paying shipping on such a small item.

[acemorgan]

1/8 is the dia. & 1/8 is the grip they use for the case rivets. the 1/4 in. grip are fine too
you can get a box of 100 quanity at an home depot. for around $4.38. get the aluminum ones cause the steel rivets are hard to work with.

[Slave1974]

I will get both, but I wanted black rivets, can I paint them ahead of time?

[Caoder]

you'll only need the 1/4 ones....

[Slave1974]

where locally could one find these? All of my local stores have white, silver and brown. Yikes.