+ Reply to Thread
Results 1 to 4 of 4

Thread: Silverstone TJ-07 user help!!!

  1. #1
    Registered User
    Join Date
    Jan 2009
    Posts
    14
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Silverstone TJ-07 user help!!!

    Hi guys, i am planning to buy a TJ-07 for the first time and i want to ask:
    1. Whether 2 MCR320 can fit in the bottom part of this case with the PSU laying down 180 degree instead of 90 degree (the case will be modded and the length of this case is 565mm while the MRCs and my corsair HX620 are 410mm and 150mm respectively)?
    2. What is the clearance of the bottom compartment (wide and height)?
    Thanks in advance

  2. #2
    Xtreme Cable Management Freak Mabyboi's Avatar
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    1,304
    Thanks
    1
    Thanked 0 Times in 0 Posts
    i know a quad and a double, and a triple and a double fit down there. as for two triples its hard to say, if you sandwhich two mcr-320's... maybe?
    Project: HeadShot
    Intel i7 3770k | Corsair H100
    EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
    Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
    16GB Corsair Vengeance Low Profile Ram
    Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
    Corsair AX850W PSU
    27" Apple Cinema Display (2560x1440)
    Corsair 600t White
    Picture

    You best be Crunching and Folding/GPUgrid'ing!

  3. #3
    Xtreme Member r4st4m4n's Avatar
    Join Date
    Jul 2007
    Posts
    327
    Thanks
    0
    Thanked 0 Times in 0 Posts
    No it won't fit. But as said MaByBoI, you can fit a quad and a double, so you would have the same surface area.
    Q6600@3.6 GHz / GA-X48-DQ6
    2x2GB Kingston HyperX DDR2-800
    Asus HD 5870
    Corsair TX-850
    WD Velociraptor 150GB / WD Green power 500GB
    Water Cooling: EK res 250 > Swiftec MCP655 > Swiftec MCR320 > EK-FC5870 > HeatKiller 3.0 LT

  4. #4
    Xtreme Member
    Join Date
    Jul 2009
    Posts
    114
    Thanks
    0
    Thanked 0 Times in 0 Posts
    you can download google sketchup for free and test different configurations of already made models
    http://scc.jezmckean.com/cat/11

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts