I guess it's 12v, but how many mA? I want to run a 2nd 120mm fan for a "push pull" setup on the same 4 pin header and just want to confirm it will run 2 x fans without burning it out.
Don't own a multimeter, I r n00b.
*On the Blackops MB.
I guess it's 12v, but how many mA? I want to run a 2nd 120mm fan for a "push pull" setup on the same 4 pin header and just want to confirm it will run 2 x fans without burning it out.
Don't own a multimeter, I r n00b.
*On the Blackops MB.
Last edited by Spork!; 10-15-2009 at 02:55 AM.
BLACKOPS mobo., 4 GB Corsair xms3 XMP DDR3 RAM @1333 7-7-7-20, seagate 'cuda v11, 1TB, Q9650 @ 3.7, Megahalems cooler, corsair HX620 PSU, Galaxy 9800 GT. Win 7 HP 64. Intel X25-M G1 80 GB ssd
Thats a good question. I'd also like to know the power ouput for the CPU/NB/case & 2 fan headers in this motherboard..
I'm living proof Murrphy's law is real
i7-920 D0 #3919A704 (4.0ghz)
Mugen-2
Foxconn Blodrage
6g OCZ 12800 Gold (1600)
OCZ StealthxStream 700w
Sapphire 4780 1g
all headers should do atleast .6A, im not sure on if the cpu pwm socket dose more though. what fans are u using
5930k, R5E, samsung 8GBx4 d-die, vega 56, wd gold 8TB, wd 4TB red, 2TB raid1 wd blue 5400
samsung 840 evo 500GB, HP EX 1TB NVME , CM690II, swiftech h220, corsair 750hxi
I am betting Thermalright.... ???
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
@ CobraXP - Thermalwrong. These: http://www.pccasegear.com/index.php?...ducts_id=11491
BLACKOPS mobo., 4 GB Corsair xms3 XMP DDR3 RAM @1333 7-7-7-20, seagate 'cuda v11, 1TB, Q9650 @ 3.7, Megahalems cooler, corsair HX620 PSU, Galaxy 9800 GT. Win 7 HP 64. Intel X25-M G1 80 GB ssd
they should be good for 1.2A+
i even pulled more than 2A once to check how beefy they are and it worked fine
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
Thanks Saaya. I know I could just molex the fan/s, but I prefer it to adjust speed automatically as required and the MB header is the WTG for that.
BLACKOPS mobo., 4 GB Corsair xms3 XMP DDR3 RAM @1333 7-7-7-20, seagate 'cuda v11, 1TB, Q9650 @ 3.7, Megahalems cooler, corsair HX620 PSU, Galaxy 9800 GT. Win 7 HP 64. Intel X25-M G1 80 GB ssd
Bookmarks