Gulftown , E762 , 5870s

[AndreYang]

Something doesn't seem right with your 3x test Andre. It seems bugged low, even GT1 is very low for 4.58GHz.

yeah, something not right. I retest it. Everything is ok now. I have no any idea really.

[billdavis]

ok, Thank you very much Andre

[LAMB OF GOD]

bro which catalyst drivers ur using??? i see it shows 9.0
did u try new ones???
and when ur ln2 is coming up????

[billdavis]

I see 9.10

[LAMB OF GOD]

mybad i guess in ist post he was using older i can be wrong

[billdavis]

i think he was using a special cool guy only driver

[LAMB OF GOD]

any ln2 updates coming brother????
so many people r waiting for ur updates

[LAMB OF GOD]

and thgis is what im sayin his gpu says its 9.0 catalyst

[FlanK3r]

nice, try 3D05

[PeterStoba]

Thread revival here, but I was hoping you could tell me Andre, what were the cards running at on that mobo?

Example, the first 3 at PCI Express 2.0 x16 and the fourth at x8 or are they all x16? Can't find out what the classified 4x supports on their site or google, just says 4 way SLI support.

[AndreYang]

Thread revival here, but I was hoping you could tell me Andre, what were the cards running at on that mobo?

Example, the first 3 at PCI Express 2.0 x16 and the fourth at x8 or are they all x16? Can't find out what the classified 4x supports on their site or google, just says 4 way SLI support.

PCIE is the same as P6T7 WS SuperComputer. You can google it.

[N3RO]

yeah, something not right. I retest it. Everything is ok now. I have no any idea really.

Next time use a Genuine copy of Windows

[AndreYang]

Next time use a Genuine copy of Windows

[aNoN_]

Soeh... when's teh LN2 results coming?

[almighty15]

Intel Max safe Vcore :

65nm - 1.55v
45nm - 1.45v
32nm - 1.35v ( Guesstimate )

So if the Max safe is around that point then all these clocks of 4.5-4.6Ghz won't be happening 24/7

[Gunslinger]

Intel Max safe Vcore :

65nm - 1.55v
45nm - 1.45v
32nm - 1.35v ( Guesstimate )

So if the Max safe is around that point then all these clocks of 4.5-4.6Ghz won't be happening 24/7

This is the Xtreme 3D Team section, max safe vcore for 24/7 is not a concern.

[Linuxfan]

Intel Max safe Vcore :

65nm - 1.55v
45nm - 1.45v
32nm - 1.35v ( Guesstimate )

So if the Max safe is around that point then all these clocks of 4.5-4.6Ghz won't be happening 24/7

Those "safe voltage" specs is for n00bs on the stock air coolers. Intel doesn't want them to blow up their chips and have a bunch of RMAs...
This is Xtreme Systems!

[Alexxx650]

24/7 CPU 1.54 SS -38 idle load Crysis 1920x1200 -36
280@810/1620/1300 1.425vGPU water cold

Max http://valid.canardpc.com/show_oc.php?id=850888

[almighty15]

Those "safe voltage" specs is for n00bs on the stock air coolers. Intel doesn't want them to blow up their chips and have a bunch of RMAs...
This is Xtreme Systems!

This is the Xtreme 3D Team section, max safe vcore for 24/7 is not a concern.

I know it is but loads of people over at overclock.net and normal overclockers are still scared of bricking there chip

I ran my 45nm Intel chip in 1.64Vcore for months under water and the only reason I stopped was that it had started to burn the pads and pins on the CPU and socket.

I've just moved over to AMD and I have a Athlon 2 x2 at 1.545Vcore on the stock cooler and all is fine

By the time voltage affects a chips performance and stability the chip is to old to be of any use anyway

[Don_Dan]

I know it is but loads of people over at overclock.net and normal overclockers are still scared of bricking there chip

Forget about safe voltages, as long as you can cool it properly and you know what you're doing you're fine. Overvolting might shorten the life time of your CPU from 15 years to 10 years, but who cares?!

[s3rv3r]

Four WRs from AndreYang:



http://www.nordichardware.com/news,10590.html