Page 2 of 4 FirstFirst 1234 LastLast
Results 26 to 50 of 97

Thread: Build Log – Corsair Obsidian 800D Liquid Cooled Dual Loop System

  1. #26
    Xtreme Cable Management Freak
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    1,308
    Quick question: what paint did you use for your gtz? looks amazing, and i have a dvd drive and hdd cage to paint... pm me if you want
    Project: HeadShot
    Intel i7 3770k | Corsair H100
    EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
    Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
    16GB Corsair Vengeance Low Profile Ram
    Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
    Corsair AX850W PSU
    27" Apple Cinema Display (2560x1440)
    Corsair 600t White
    Picture

    You best be Crunching and Folding/GPUgrid'ing!

  2. #27
    Moderator
    Join Date
    Aug 2007
    Location
    Back and forth between Florida and Maine
    Posts
    4,097
    Stunning result

    Corsair needs to use these pics in their advertising!

  3. #28
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Parker, CO
    Posts
    104
    Quote Originally Posted by MaByBoI View Post
    ... i think you need a new vga cooler though
    I will update the VGA cooler once the Nvidia 300 series cards come out in a few months. I didn't want to spend money on a better looking VGA cooler when I plan on upgrading my Graphics card. At that time I will drop a dime on some nice EK blocks for the SLI set up as well.

    Quote Originally Posted by MaByBoI View Post
    Quick question: what paint did you use for your gtz? looks amazing...
    Rust-Oleum Textured Black

  4. #29
    Xtreme Cable Management Freak
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    1,308
    Quote Originally Posted by Mr_Armageddon View Post
    I will update the VGA cooler once the Nvidia 300 series cards come out in a few months. I didn't want to spend money on a better looking VGA cooler when I plan on upgrading my Graphics card. At that time I will drop a dime on some nice EK blocks for the SLI set up as well.



    Rust-Oleum Textured Black
    did you sand it down, paint black and then a clear coat? or did you just paint on the standard shiny metal with that? looks like rhino-spray for the back of a pickup truck
    Project: HeadShot
    Intel i7 3770k | Corsair H100
    EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
    Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
    16GB Corsair Vengeance Low Profile Ram
    Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
    Corsair AX850W PSU
    27" Apple Cinema Display (2560x1440)
    Corsair 600t White
    Picture

    You best be Crunching and Folding/GPUgrid'ing!

  5. #30
    Registered User
    Join Date
    Feb 2009
    Posts
    1
    how much did that all set you back for ?

  6. #31
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Location
    Sweden
    Posts
    722
    Its a beauty!!
    Loonym...You are missed.

    The element of one

    Breathe me in
    Breathe me in

    I disbelieve in separation. I close my eyes to see you.
    This is for you, everything I am. This is for you, take it from me.
    I, I disbelieve separation. I close my eyes
    there's no escaping me
    This is for you, everything I am. This is for you, take it from me.
    In your heart in your soul. I perceive rejuvenation

    Breathe me in. I am forever. Deep within I am eternal.

    I will return to you. I am with you always. I will never turn away from you.

  7. #32
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Parker, CO
    Posts
    104
    Quote Originally Posted by MaByBoI View Post
    did you sand it down, paint black and then a clear coat? or did you just paint on the standard shiny metal with that? looks like rhino-spray for the back of a pickup truck
    I did not sand it down. Just cleaned it off an applied the spray-paint. The Rust-Oleum Textured Black does give the appearance of Rhino-Spray, but only after applying the second coat.

  8. #33
    Xtreme Cable Management Freak
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    1,308
    Quote Originally Posted by Mr_Armageddon View Post
    I did not sand it down. Just cleaned it off an applied the spray-paint. The Rust-Oleum Textured Black does give the appearance of Rhino-Spray, but only after applying the second coat.
    Awesome! thanks man! i will definantly look for that at my local crappy tire!

    Edit: is this the rust-oleum you are using?? http://www.canadiantire.ca/AST/brows...ay%2BPaint.jsp

    your build upsets me by the way... i miss my ultra....
    Last edited by Mabyboi; 10-05-2009 at 11:58 AM.
    Project: HeadShot
    Intel i7 3770k | Corsair H100
    EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
    Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
    16GB Corsair Vengeance Low Profile Ram
    Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
    Corsair AX850W PSU
    27" Apple Cinema Display (2560x1440)
    Corsair 600t White
    Picture

    You best be Crunching and Folding/GPUgrid'ing!

  9. #34
    Registered User
    Join Date
    Jul 2009
    Posts
    44
    Amazing, how are the temps?

  10. #35
    Xtreme Cruncher
    Join Date
    Aug 2009
    Location
    Huntsville, AL
    Posts
    671
    grats finishing. nice build. nice case.

  11. #36
    Xtreme Cruncher
    Join Date
    Sep 2008
    Location
    Kansas City, Missouri
    Posts
    2,122
    Love the build and you made me realize that is a great case I at first was kind of ify on it but you turn it into a work of art. Great job!
    ~ Little Slice of Heaven ~
    Lian Li PC-A05NB w/ Gentle Typhoons
    Core i7 860 @ 3gHz w/ Thor's Hammer
    eVGA P55 SLI
    8GB RAM
    Gigabyte 7970
    Corsair HX850
    OZC Vertex3 SSD 240GB

    ~~~~~~~~~~~~

  12. #37
    Xtreme Enthusiast
    Join Date
    Feb 2009
    Posts
    723
    Those XSPC reservoirs look really awesome mounted like that
    sigh

  13. #38
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Parker, CO
    Posts
    104

    Update - 10/12/09 - Temps

    I had a chance to Overclock everything and recorded some temps for those who were asking for them.

    With a CPU OC @ 4.25GHz, my temps for loop 1 are as follows:

    • CPU - 61 C
    • ChipSet - 62 C
    • VREGs - 54 C


    These results were recorded after 30 minutes of a CPU burn with Prime95.

    I was able to reduce these temps even lower, but it was by cranking up the fan speeds, which for me kind of defeats the purpose of a quiet, liquid cooled PC. The temps above were recorded with the Rad Fans @ 1,100 RPM which is barley noticeable. At 1,500 RPM the temps go down, but they are a bit loud loud for my taste.

    On loop 2, my OC'd 8800Ultra @ 715MHz, 1250MHz RAM never got above 55 C during a stress test using both ATI Tool, and rthdribl. Obviously only having one card on the loop is making it pretty easy to stay cool. It will be interesting to see what temps the GPUs will maintain when I throw two GT300 series cards on it in SLI. Hurry up and release the new cards already Nvidia
    Last edited by Mr_Armageddon; 10-12-2009 at 10:09 AM.

  14. #39
    Xtreme Member
    Join Date
    Mar 2008
    Location
    Idaho
    Posts
    122
    Quote Originally Posted by Mr_Armageddon View Post
    I had a chance to Overclock everything and recorded some temps for those who were asking for them.

    With a CPU OC @ 4.25GHz, my temps for loop 1 are as follows:

    • CPU - 61 C
    • ChipSet - 62 C
    • VREGs - 54 C


    These results were recorded after 30 minutes of a CPU burn with Prime95.

    I was able to reduce these temps even lower, but it was by cranking up the fan speeds, which for me kind of defeats the purpose of a quiet, liquid cooled PC. The temps above were recorded with the Rad Fans @ 1,100 RPM which is barley noticeable. At 1,500 RPM the temps go down, but they are a bit loud loud for my taste.

    On loop 2, my OC'd 8800Ultra @ 715MHz, 1250MHz RAM never got above 55 C during a stress test using both ATI Tool, and rthdribl. Obviously only having one card on the loop is making it pretty easy to stay cool. It will be interesting to see what temps the GPUs will maintain when I throw two GT300 series cards on it in SLI. Hurry up and release the new cards already Nvidia
    Sad that the chipset runs hotter than the CPU even under water. Still within safe limits though. Nice job!
    Workstation/Playstation: i7 920 D0 @ 3.8, TRUE, EVGA x58, BFG GTX 295, WD 640x2 in RAID 0, 12GB OCZ DDR3, ATCS 840, Dell 24" & Samsung 19", Razer Lycosa and Logitech G9r, HTO Striker, Windows 7 Ult. 64, Antec TruePower 1000w.
    Wife's Computer: E4500 @ 3.0GHz on 1.36v, Rocketfish CPU Cooler, Foxconn, 4GB Corsair, Sea 250, Antec Sonata w/500w, ATI 2400, 17" Samsung, Vista Ult. 32.
    HTPC: X2 2400BE, 500GB + 750GB + 80GB, ATI 3450 Hybrid CF w/Asus 780G, 4GB A-Data 800MHz DDR2, 32" Westinghouse, XBOX 360 HDDVD (w/o xbox), Aver DTV Tuner, Huappage DTV tuner, Windows 7 32 bit.
    PDAs: iPod Touch 16GB and Samsung Omnia

    See my work log here: PROJECT ATCS 840

  15. #40
    Xtreme Member
    Join Date
    Sep 2007
    Location
    Bellingham, WA, USA
    Posts
    100
    Quote Originally Posted by Mr_Armageddon View Post
    • CPU - 61 C
    • ChipSet - 62 C
    • VREGs - 54 C
    Very nice build!
    What voltages are you running on the CPU & Chipset?

  16. #41
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Parker, CO
    Posts
    104
    Quote Originally Posted by Raptor-X View Post
    Very nice build!
    What voltages are you running on the CPU & Chipset?
    Voltage Control for 4.25GHz
    • EVGA VDroop Control ( Without VDroop )
    • CPU VCore ( 1.325v )
    • CPU VTT Voltage ( +300mv )
    • CPU PLL VCore ( 1.905v )
    • IOH PLL VCore ( Auto )
    • QPI PLL VCore ( 1.325v )
    • DIMM Voltage ( 1.65v )
    • IOH VCore ( 1.325v )
    • IOH/ICH I/O Voltage ( 1.625v )
    • ICH VCore ( 1.225v )
    • VTT PWM Frequency ( 490 KHZ )
    • CPU PWM Frequency ( 940 KHZ )

  17. #42
    Xtreme Member
    Join Date
    May 2009
    Location
    middle of no where called evansville in
    Posts
    345
    how much does it weigh?

  18. #43
    Chasing After Diety
    Join Date
    Jan 2007
    Location
    Absolutely Speachless :O
    Posts
    11,930
    You know the first time i saw this case, i thought it was really ugly.

    But the more and more i see you guys build off it, its starting to look better and better each build.

    Now you guys almost got me wanting to get one.

    Very nice job..
    Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
    Miyuki: W3580 6GB DDR3 P6T-Dlx
    Lind: Dual Gainestown 3.07
    Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*

    [12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
    [12:38] Naekuh: i love watching u get the firing squad on XS
    Its my fault.. and no im not sorry about it either.

  19. #44
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Parker, CO
    Posts
    104
    Quote Originally Posted by disturbed13 View Post
    how much does it weigh?
    Don't know exactly, but it isn't light. I would estimate around 60-65lbs.

  20. #45
    Xtreme Enthusiast
    Join Date
    Aug 2007
    Location
    Sweden
    Posts
    722
    Your screen setup is awsome too. Everything looks so clean and nice! =) How about some 3DMark scores and such?
    Loonym...You are missed.

    The element of one

    Breathe me in
    Breathe me in

    I disbelieve in separation. I close my eyes to see you.
    This is for you, everything I am. This is for you, take it from me.
    I, I disbelieve separation. I close my eyes
    there's no escaping me
    This is for you, everything I am. This is for you, take it from me.
    In your heart in your soul. I perceive rejuvenation

    Breathe me in. I am forever. Deep within I am eternal.

    I will return to you. I am with you always. I will never turn away from you.

  21. #46
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Parker, CO
    Posts
    104
    Quote Originally Posted by Anemic View Post
    Your screen setup is awsome too. Everything looks so clean and nice! =) How about some 3DMark scores and such?
    My 3DMark score is nothing to brag about since I am using an old 8800Ultra to hold me over until the GT300 (Fermi) series cards are released and I get two for SLI. But here you go:

    P10096 3DMarks

  22. #47
    Registered User
    Join Date
    Sep 2007
    Posts
    54
    Good to see a nice stylish 800D Build!

  23. #48
    Xtreme Member
    Join Date
    Oct 2007
    Location
    London
    Posts
    146
    I really like your log and build.

    This is really good work on the new case.

    Please keep us updated as you upgrade parts within the system such as graphics card.

  24. #49
    Registered User
    Join Date
    Oct 2009
    Posts
    14
    Nice build.
    Nice case.
    good jobs

  25. #50
    Xtreme Member
    Join Date
    Mar 2009
    Posts
    277
    The nicest dark blue tubing I've ever seen. That's saying a lot, as I usually hate dark blue tubing.

    Great job overall.

Page 2 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •