Hi! My nickname is ying and i’m a Young learning modder of 17 years old. This is my first post but it doesn’t means that it’s the first time I enter to this forum, the first time I entered in this forum was 1 or 2 years ago, in the beginning of my watercooling experience.
I'm not english native speaker so it's possible that my english in this thread will sound rare.
First o all I want to give THANKS to Coldzero, the only company nowadays who is sponsoring my project :
For those who doesn’t know what is coldzero, coldzero is a little company (www.coldzero.eu) which dedicates to work with the acrylic and they really make awesome things, they have done some mod’s but their main objective is to make your ideas to real things, so the possibilities are limited to your imagination and their own too, because they sell some custom stuff for cases like obsidian series or the famous TJ07.
Other sponsors:
Let’s talk about the mod:
My mod will be based in a obsidian 800D from corsair. One of the first objective is to watercool the max. possible hardware maintaining the same simple style that the own obsidian case gives, so to watercool everything and make the watercool system aesthetic look as simple as possible.
Now let’s talk about the hardware. I don’t think that I will renew the hardware so I will continue using socket 1366:
-Intel i7 920 D0 @ 4.2 GHz
-Asus Rampage III Extreme
-Point Of View GTX 480
-Corsair Dominator Airflow II 6Gb (3x2048) PC3-15000(1866Mhz) - CL9
-Corsair HX850
-Seagate Barracuda 500GB
And about the watercooling:
-Ek supreme HF Full nickel + Easy Mount system (black)
-Aquacomputer Aquagrafx gtx 480 nickel
-Ek-FB RE3 - Acetal+Nickel
-Black Ice SR1 480
-Black Ice SR1 240
-Swiftech mcp 655 (x2) + Ek D5 dual top (single loop) White Acetal
1-The acrylic body (this pictures are old pictures because I use this combo in old project and this is why in the pictures says yingmod and not Dreampc ! ) :
2-Acetal top with bitspower plug:
3-Acetal connector for the Ek top:
A custom killcoil:
And there’s some pictures about the the reservoir mounted:
And this is the Ek top for 2 d5 pumps and single loop configuration. It’s white because the day I purchased it, the black one was out of stock:
And this is how looks like mounted in the case:
-Fittings: Fatboy fittings of 13 mm OD
-TFC Pass Through Connector - Fill/Drain Port
-Scythe gentle typhoon AP-15 (1850 rpm) (x4)
-Scythe gentle typhoon 3000rpm (x2)
-Ram waterblock: Ek RAM Dominator EN nickel + acrylic.
-4x120mm Fan Radiator Shroud, Black
Actual build:
Style:
My mod is not original, I know it! I would like to thank to MurderMod who make’s awesome build and inspired to make my mod, since the first day I saw it I loved this style but how to make something similar to murdermod if they doesn’t work in obsidian cases? The only response I found it was to design my own pieces so this is why this mod could be remembering to murdermod for a lot of users and including me
How I work?
Normally, the modders create mod’s with their own hands and their skills but unfortunately I didn’t born with such good skills but I still loving the perfection so decided to learn by my own way to use CAD software for previewing my ideas. Everything in this mod is designed with CAD software, for the main sketch in 2D I used Autocad:
And when I got the 2D sketch’s OK I try to make it in 3D for checking that all is fine and they fit properly. To do that I use Solidworks 3D CAD software:
And for “rendering” I use the photoview 360 from the own Solidwork. I know it, Photoview 360 is not the best tool for rendering but I didn’t got the enough time to learn to use other one’s.
The solidworks is not as easy as the sketchup but it gives some interesting options that sketchup doesn’t offers.
After the design is OK, I send the CAD file to Coldzero and they cut every piece to the millimeter with laser-cut tech. The result: awesome finish!
The main designs:
This is my first post in this forum but I’ve been working in my mod for at least 1 year. So there are some old designs which are a reality, some of they are:
-PSU plate:
-Custom GTX 480 backplate design:
-Custom obsidian 800D midplate design:
-Motherboard tray plate:
-Custom 120/140 rear fan grill by coldzero:
Nowadays I’m working in a new full faceplate which will be fitting in front of the default faceplate from corsair.
The basic structure is something like this:
To place the faceplate, I will use few little backplates:
This little backplates will fit inside the obsidian 800D default faceplate structure:
With screws like this one’s:
but in black. There is a little space for the rehobus (lamptron fc5 v2) wich will fit if perfectly and will look like the rehobus it’s integrated with the own pc case:
Up there, this it’s just the structure but now comes the customization and design, so the aesthetical part. The most actual design of the faceplate is this one:
I like it but I think that it could be better so I will try to make new design in the future ! (The red circles are power and reset buttons)
But that’s not all, I’m working in a new motherboard tray plate. This one will be different; this one will follow the idea to "integrate" the hardware in the case.
For doing that I will situate some plate's in front of the mother board which will look like a plate that goes out from the motherboard and the other idea in the new plate is to make the PSU cables invisibles, what I mean is that the own PSU cables will looks like they comes from the own case.
The new faceplate by now it’s just a concept so I need to work hard for getting it done ! (the design I mean).
To be continued...
Bookmarks