Gpu-z

[stasio]

GPU-Z v0.3.5

* ATI Radeon HD 5870 (Cypress) fully supported (includes voltage monitoring)
* Added or improved support for NVIDIA FX5500, 9400 GT, G73, GTS 240, GT 140, FX 1800, GT 120 (Apple), FX 380, FX 350, GTX 295 Single PCB, Quadro CX, FX 5800, FX 4800, FX 3800, GTX 180M, GTX 260M, FX 2700M, G 110M, GT 120M, GT 220M, FX 1700M, G 105M, MCP79MX
* Added or improved support for ATI HD 4730, HD 4650 AGP, M92, M96, M98
* Added clock reading for Intel i910, i915, i945, 946
* Added support for DDR3 detection on G9x
* Added monitoring support for RV7xx based mobile chips
* Voltage controller "slaves" are now called "phases"
* Added Intel Havendale detection
* Fixed BIOS parsing on some newer HD 4870 cards
* Added voltage monitoring support for MSI N275GTX Lightning

[stasio]

GPU-Z 0.3.6

* Added Infotips, they can be turned off in the system menu
* Added preliminary support for ATI Radeon HD 5900 (Hemlock), HD 5600 (Cedar), HD 5300 (Redwood)
* Added full support for HD 5850, HD 5770, HD 5750
* GPU-Z no longer crashes on ATI ULPS enabled CrossFire configurations
* Fillrate Pixel, Fillrate Texel, Memory Bandwidth will now correctly recalculate when clocks change
* Bus Interface, ATI shader count is now periodically refreshed
* Added support for HD 5850 voltages
* Second voltage on HD 5870 correctly named VDDCI
* ATI clock reading code fixed
* Fixed default clock reading on HD 5850
* Added Mutex to avoid collisions on long I2C operations
* Added basic detection for a lot of NVIDIA card fakes
* Added detection for ATI FireGL V7600, M92, RS880
* Added detection for NVIDIA GT 130, 9600 GE, Tesla C1060, G 220, GT 220, NVS 3100, GTS 160 M, NVS 160M, NVS 150M, G105M, GT 240M, G105M, G210M, G310M, ION LE
* Fixed die size and transistor count on G72 M

[stasio]

GPU-Z.0.3.7

- Added Infotips for sensors
- Fixed crash when ATI ULPS CrossFire enabled
- Added full support for ATI HD 5970 (Hemlock)
- Added full support for NVIDIA GeForce GT 240 (GT215)
- Added "ULPS active" note to CrossFire status when ULPS active
- Fixed overclocks via CCC not showing correctly
- Added checkboxes to show availability of CUDA, PhysX, OpenCL and DirectX Compute
- Improved memory type detection for GT 216, GT 218
- Added voltage monitoring support for HD 5770
- Disconnected fan now shows correctly in sensors (when detectable via hardware)
- Improved accuracy of ATI GPU load monitoring
- Added detection for ATI RV380/RV530 cards relabeled to NVIDIA 9400/9500/9600 GT
- Added support for NVIDIA 9300 SE, NVS450, GT 240, GTS 250M, G102M
- Added support for Intel G41

[stasio]

GPU-Z 0.3.8

* Added framework for translations in GPU-Z, to do that we need your help. Please go to tpu.me/forums/forumdisplay.php?f=72 to submit contributions in your language
* Added sensors to monitor GPU load percentages on NVIDIA
* Fixed startup on Windows 2000 (DLL not found)
* Improved detection/added sensors for ATI M86
* Fixed several NVAPI crashes
* Fixed crash when PhysX not available
* GPU-Z can now be set in its system menu to be always on top of other windows

[stasio]

GPU-Z 0.3.9

* Added localized tooltips in the languages: AM, AR, BG, CN, DE, FA, FR, IT, PT, RS, RU, TR, UA. Default language is your system language, you can change this setting in the system menu of GPU-Z.
* Added support for ATI HD 5830, HD 5770, HD 5750, HD 5670, HD 5570, HD 5450, HD 4860, HD 4750, Mobility HD 3430, M97, Mobile HD 5850, 5730, 5650, 5470 (Broadway, Madison and Park)
* Added support for NVIDIA GeForce 6200A, GTS 250, 9800S, 205, 310, GT 320, GT 240, GTS 360M, 230M, 330M, 240M, G105M, Quadro NVS170M, G210M, GTS 250M, future MCP, more ION variants.
* Added support for Intel GMA500, Clarkdale, Arrandale
* Added detection for variants of NVIDIA NV41, G94, G98, ATI RV350, RV370, R480, RV515. Most of them used on fake cards relabeled to NVIDIA 9x00 series.
* Improved default clock BIOS parsing on NVIDIA
* Fix for incorrect default clocks on HD 5000 Series
* Fixed incorrect real-time clock monitoring on some HD 5000 cards
* Added more accurate real-time clock monitoring function for NVIDIA
* Improved OpenCL detection on ATI R700, RV790, all HD 5000 cards
* Added temp. monitoring support for some Intel IGPs
* Improvements to CUDA detection
* Removed memory chip input fields from VGA BIOS Upload

[stasio]

GPU-Z 0.4.0

* Added support for NVIDIA GeForce GTX 470 and GTX 480
* Added voltage monitoring for HD 5750, 5830, 5870 Lightning
* Added support for Intel Pineview
* Fixed double memory clock reading on NVIDIA w/ GDDR5 (real clock is now displayed)
* Fixed rounding errors in RV7xx and Evergreen fan monitoring code
* Added tooltip translations for Albanian and Chinese Traditional
* Memory bandwidth calculation uses GB now instead of GiB
* Added new hardware giveaway tab in cooperation with ASUS

[xsbb]

Excellent! Thanks stasio!!

[stasio]

GPU-Z 0.4.1

* Fixed an issue on all NVIDIA cards that would sometimes cause them to lose fan control when GPU-Z is running. Please don't run pre-0.4.1 and 0.4.1 at the same time, this might result in incorrect readings in the 0.4.1 window.
* Fixed system crash on MSI HD 5830 TwinFrozr II
* Validation upload now uses Unicode for entered name
* Reverted memory bandwidth calculation introduced in last version. It introduces too much confusion, we will go with what all companies use in their marketing material, even though we believe it is not correct. Using power of 10 again now, 1 GB/s = 1,000,000,000 Bytes per Second.

[stasio]

GPU-Z 0.4.2

[stasio]

[GPU-Z Test Build] Fixes default clock detection on ATI
http://forums.techpowerup.com/showth...25#post1846125

[stasio]

GPU-Z 0.4.3

http://www.techpowerup.com/downloads/1798/mirrors.php

Added full voltage controller monitoring for GeForce GTX 480
Added real-time clock monitoring for GF100
Added detection for vendor GALAXY
Complete revamp of voltage controller architecture. Adds voltage monitoring for many ATI & NVIDIA cards and generic monitoring method for NVIDIA cards via driver.
Added support for >4 GB memory on NVIDIA
Fixed memory clock reading on some HD 5670 cards
Fixed thermal sensor count on some ATI Evergreen models
Fixed incorrect default clock reading on some ATI Evergreen models
Added detection for NVIDIA GTX 465, GT 320M GT 335M, ION variant, GT 340, Tesla C2050, Tesla M2050, GTX 285M, GT 325M, Quadro FX 880M, Quadro FX 1800M
Added detection for ATI HD 5570, Mobility 4550, Mobility 5870, HD 4250, HD 4290, FirePro V7750
Added detection for Intel GMA 3150
Added fix for ADT7473 coldbug (GTX 480) via commandline parameter /fixcoldbug
Added OCP adjustment for CHL8266 (GTX 480). Use it via command line parameter /chl8266ocp without parameter to query, with numeric value seperated by space to set. This is a permanent change that will not be reverted by powering down the system.
Added languages Hungarian and Spanish
Updated languages French, Italian, Russian

[miahallen]

parameter /fixcoldbug

Is this confirmed to be working? Is there any discussion on it somewhere?

[stasio]

Is this confirmed to be working? Is there any discussion on it somewhere?

Source:
http://forums.techpowerup.com/forumdisplay.php?f=56

[stasio]

GPU-Z 0.4.3.3

http://www.fileden.com/files/2009/12...6817/GPU-Z.zip

-fixes the "BIOS reading not supported" message on all ATI cards with 0.4.3
-fixes a bluescreen crash on GeForce 8200/8300 devices related to voltage controller detection

[stasio]

GPU-Z 0.4.4.0

http://de1-dl.techpowerup.com/SysInf...PU-Z.0.4.4.exe

-Added support for NVIDIA GeForce GTX 460, GT 330, GT 315, GT216 based ION
-Added support for AMD HD 5670 (Juniper), Mobility HD 5430, Mobility 4200, Mobility 4100
-Added PowerColor hardware giveaway
-Added die size measurement for NVIDIA GF100
-Added option to GPU-Z's system menu to show temperatures in °F
-Fix for BIOS reading on ATI
-Fixed decimal points in ADT7473 reading
-Fixed crash on GeForce 8300 IGP
-Added clock monitoring for RS780 variants
-Improved clock monitoring for ATI R6xx architecture

[stasio]

[GPU-Z Test Build] Support for AMD Radeon HD 6950 & HD 6970

http://forums.techpowerup.com/showthread.php?t=136218

- Adds support for HD 6950 and HD 6970
- Fixes fillrate rounding error on GTX 400 cards

[stasio]

[GPU-Z Test Build]

http://forums.techpowerup.com/showthread.p...124#post2127124

- Fixes a crash in OpenCL detection on NVIDIA cards, when the ATI Stream SDK is installed.
For some reason AMD's driver still loads even though no ATI card is installed in the system.

- Also fixed, rounding error when calculating Texture Fillrate on NVIDIA cards

[stasio]

GPU-Z 0.5.0

http://www.techpowerup.com/downloads/1921/mirrors.php

Added full support for Radeon HD 6950 and HD 6970
Fixed TMU/Texture Fillrate rounding error on NVIDIA cards
Improved voltage monitoring support for GTX 570
Workaround for ATI OpenCL driver crashing GPU-Z on systems with NVIDIA cards
Fixed crash when driver version could not be read
Fixed crash when splash screen interrupted by message box

[stasio]

GPU-Z v0.5.1

http://www.techpowerup.com/downloads/1930/mirrors.php

* Added support for NVIDIA GTX 560 Ti, 480M, 485M
* Added transistors and die size for 460M, 445M, 435M
* Added release date for 6800 GT, 6600 GT, 6600, 6200, 8800 GTX, 8800 GTS, 8800 Ultra, 8600 GTS, 8500 GT, 8800 GS, 9600 GSO, 8800 GT, GTS 250, GT 440
* Added preliminary support for AMD Zacate and Ontario APUs
* Found a new way to disable NVIDIA's power limiter
* Added support for GTX 570 and GTX 560 to power limit disable function, the parameter is now called /GTX500OCP
* Fixed crash in sensors panel
* Acer PCI vendor now using a shorter text that fits the field width
* Added CHL8214 & CHL8226 support for AMD Barts and Cayman
* Improved the automatic update check to run completely in the background and only appear when an update is available (manual update check is unchanged)

[Johnny87au]

thanks stasio

[Rattle]

still doesnt read 3d voltage correctly with 6900's

[Jeager]

still doesnt read 3d voltage correctly with 6900's

yeah that's too bad, you can only check it with AB atm

[stasio]

GPU-Z v0.5.2

http://www.techpowerup.com/downloads/1969/mirrors.php

Added support for NVIDIA GT 440, GTX 550, GTX 560, GTX 570, GTX 590
Added support for AMD HD 6990
Added detection support for more Sandy Bridge IGPs
Fixed ROP count on ATI Madison
Improved OpenCL detection for ATI
Added CHL8228 voltage controller support for Cayman Pro and XT
Improved driver based voltage monitoring support for ATI cards
Added startup parameter /card followed by the adapter index, starts with 1.
Several crash and stability fixes

[stasio]

GPU-Z v0.5.3

http://www.techpowerup.com/downloads/1978/mirrors.php

Added support for AMD Radeon HD 6790, FirePro V5800
Added support for GeForce GT 555M, GTX 540M, G315M, Quadro FX 600, FX 2800M, Quadro 4000
Fixed GeForce GTX 590 release date
Added support for voltage controllers VT1556, uP6266, uP6218
Added VDDCI measurement on CHL8228 based ATI cards
Added capability to show sensors in TechPowerUp OSD Server
Fixed several crashes and resource leaks

[stasio]

GPU-Z 0.5.5

http://us2-dl.techpowerup.com/SysInf...PU-Z.0.5.5.exe

Added PowerColor hardware giveaway
On multi-GPU systems, GPU-Z will remember the selected card from the selection dropdown
Added full support for AMD A-Series Fusion processors
Added detection for ASUS MARS II
Fixed shader count detection for Blackcomb (mobile AMD Cayman)
Improved BIOS version reading on NVIDIA
Added support for NVIDIA GeForce GT 560 Ti OEM, GT 545, GT 530, GeForce GTX 580M, GT 555M, GeForce 520MX, GT 520M, 410M, 305M, Quadro 5000, Quadro 4000M, Quadro 400
Added support for AMD HD 6290, Radeon E6760 & E4690, FirePro V8800, FirePro V3700, FirePro 2460 (FireMV)

GPU-Z 0.5.5 - ASUS ROG Skin

http://us2-dl.techpowerup.com/SysInf..._ROG_0.5.5.exe