4500w of cooling power

**zipdogso** · 12-18-2009, 02:04 AM

just a small suggestion to help you with getting information on this forum....

Instead of double,triple,quadruple posting, if your post is the last one and you want to say something else hit the " EDIT " button and continue typing on your old post.

Most of your posts are only one liners but when you get three or four together you fill up half a page - some people cant be bothered to scroll down through pages and pages.

You might get more replies if people don't have to go so far to read what you have written.

Just a thought....might help....I wish you luck in your endeavours.

**cooling storm** · 01-03-2010, 03:18 PM

i will use grill propane just fore testing

**wdrzal** · 01-06-2010, 08:12 PM

Originally Posted by cooling storm

is 24 inches of merkery egnoth vacum to fill the regrigerant on the chiller and i no that there is moiser in the POE oil and in the system?

For refrigeration you need < 500 Microns of pressure. even lower is better. There are 24,500 microns in 1 inch HG vacuum. 24hg vacuum is no way even close to 500 microns .Below 29.88hg vacuum is the territory you need to be i.

Your more than ~ 6X microns rating to high @ 24hg vacuum.. those are approx numbers get a pressure calculator/converter for exact numbers.

You need a electronic micron meter to read pressures that low. a manifold is just not accurate enough.

**cooling storm** · 01-31-2010, 02:30 PM

a update i have mounted condenser number two becouse of getting ridd of more heat i will show pics and a video twomorow and i am working inside now becouse it is achuly -40C outside

**cooling storm** · 02-01-2010, 02:28 AM

Originally Posted by Asylum1

Hes going to point his window unit at his computer.

i dont have a window ac LOL!!!

**Fatfool** · 02-03-2010, 06:39 AM

I can't believe that he's doing at this age...

It seemed like a troll thread at first but I am amazed that he's actually doing it.

I suggest that after he masters this incredibly complex build, he lurks around the forums to learn more about forum etiquette.
here's a useful guide for that.
http://www.albinoblacksheep.com/flash/posting

But with this amount of intelligence at this age, this should be a breeze to him. I want to see what he is able to build in the future though. Looking a small crocs running all over his build , I get this fuzzy feeling.
I wonder how he finances it too. must have nice parents...

**Telo** · 02-08-2010, 10:00 AM

I have just one question, are you the one making all those solder joints or is someone doing that for you? I'm hoping for the latter, for your own sake.

**Quad-Damage** · 02-08-2010, 10:34 AM

Nice crocks

**cooling storm** · 02-09-2010, 09:46 AM

yes i am making all my solder joints by my self

**Telo** · 02-09-2010, 12:03 PM

Originally Posted by cooling storm

yes i am making all my solder joints by my self

Were you born with a welder in your hand or something lil' dude? I don't know if I should be impressed/amazed or worried.

**ZenEffect** · 02-10-2010, 06:39 PM

Originally Posted by Telo

Were you born with a welder in your hand or something lil' dude? I don't know if I should be impressed/amazed or worried.

brazing isnt really THAT dangerous... just gotta use common sense. dont be careless and set stuff on fire and things get hot so dont touch until its cool.

**Telo** · 02-11-2010, 07:01 AM

Originally Posted by ZenEffect

brazing isnt really THAT dangerous... just gotta use common sense. dont be careless and set stuff on fire and things get hot so dont touch until its cool.

Think about what you just said; then remember you are talking about a 13yo boy. Where I'm from you get in a lot of crap just for leaving them alone in the house at that age.

**Stewie007** · 02-11-2010, 02:09 PM

People that don't think brazing is hazardous usually end up learning one way or another. For example, learning that a burn is like an open cut; it can get infected. That's something even adults don't consider. But it happens. Ever see skin turn yellow? And we aren't talking about jaundice.

**cooling storm** · 02-13-2010, 02:55 PM

yes i am cautious wen i am brazing i hav a co2 fire exsinuiser ready if some thing was to go rong an i use heat resistant gloves just in case

sorry for my bad english

**OverShocked** · 02-14-2010, 12:01 AM

Jeeze cooling storm,
I have 2 questions for you.

1. Who is paying for all this? I am 14 my self and finished my first SS a couple of months ago. I find it very difficult to gather the money for all this stuff. Did your father already have the vacuum pump and torch?

2. What refrigerant did you land on?

**cooling storm** · 02-14-2010, 07:14 AM

Originally Posted by OverShocked

Jeeze cooling storm,
I have 2 questions for you.

1. Who is paying for all this? I am 14 my self and finished my first SS a couple of months ago. I find it very difficult to gather the money for all this stuff. Did your father already have the vacuum pump and torch?

2. What refrigerant did you land on?

Xtreme Member

1 i have a frend at a hvac/r place in norway that i get things so i dont need to pay
2 i can use any refigerant i want but i want to use r404a. and can you make a vid of your ss overshocked??
__________________

**OverShocked** · 02-14-2010, 12:45 PM

The ss is currebtly waiting a replace on the evap and a regass.

Ill upload some pics of it not running later.

**gosmeyer** · 02-14-2010, 09:03 PM

Drive on little buddy and be safe

You know this kid wasn't made to wear a bicycle helmet or needed a trophy for finishing last in the soccer league

**Philwong** · 02-14-2010, 09:41 PM

Some amazing stuff from a 13 years old!

Guys, please give him pointers instead of mocking him man.

Phil

**wez** · 02-23-2010, 05:59 AM

Originally Posted by Telo

Think about what you just said; then remember you are talking about a 13yo boy. Where I'm from you get in a lot of crap just for leaving them alone in the house at that age.

Obviously these sort of things are seen a lot different in Europe compared to the US

To the thread starter; Keep it up

Looking forward to see some results

**cooling storm** · 02-24-2010, 02:09 AM

i an turning 14 years in 21 days and i am at the hospital becouse i walked right in front of my herf/microwave gun while it was on i thught that angle of the wave guide was safe of own stupidity

**repsol_23** · 02-24-2010, 09:14 AM

Well, unfortunately sometimes getting hurt is part of the learning process. I am sure next time you will think twice before crossing in front of your microwave gun. I am very impressed that someone of your age is working with some of the tools that I didn't use until my advance senior physics lab in college. May you heal quickly!!

Originally Posted by cooling storm

i an turning 14 years in 21 days and i am at the hospital becouse i walked right in front of my herf/microwave gun while it was on i thst that angle if the wave guide was safe of own stupidity

**cooling storm** · 02-26-2010, 08:54 AM

now i AM BACK!!!! safe and sound

her is a video update and some pics

[IMG]

[/IMG] [IMG]

[/IMG][IMG]

[/IMG] [IMG]

[/IMG][IMG]

[/IMG] [IMG]

[/IMG]

**OverShocked** · 02-26-2010, 02:50 PM

What are the specs on the compressor?

**cooling storm** · 02-26-2010, 02:52 PM

the compressor is a sc21cl i think or bigger

Thread: 4500w of cooling power

Thread Tools

Search Thread

Rate This Thread

Display

haha

Bookmarks

Bookmarks

Posting Permissions