Best supper Pi 32M I could do with this CPU, only one more Bclock and it would have been great to see 7M 10s, but on loop 17 it always crashes out with a week IMC so will have to stick with this result of 7M 13.141s
Very nice review sacha35, would you recommend this board over the Rampage Extreme for gaming?
I am thinking of picking this board up once it hits the shores here in Japan.
I think rampage extreme is no longer available out there. No etailers sell this board except NCIX. I love both of these boards.
CPU: Intel Core i7-3770K Motherboard: Asus Maximus V Formula Graphics: Asus GTX 670 DCII TOP RAM: CORSAIR PLATINUM 16GB DDR3 1866
Hard Drive: OCZ Vertex 3 120GB Cooling: Corsair H100i OS: Window 7 Ultimate x64 SP1 Monitor: Samsung S27B970D PLS LED
Keyboard: Logitech MK700 Combo Power: Corsair Gold AX750W 80 Plus Case: NZXT 410 ELITE Speaker: Logitech X530
Hi there I would say go for the MF3 as games are using more and more threads these days so having the MF3 with an 860 or 870 in there will give you 8 threads instead of only 4 with the old 775 system which will give you a lot of performance over the socket 775, also because this is a new architecture the CPU's use less energy so it will be a bit cheaper to run which is nice, the memory performance is better than the socket 775, overall I would say yes go for the MF3 you won't regret it as it has everything you will need in a motherboard and more.
thanks for sharing Sasha, so what's the max bclock that you have reached?
edit: do you think that this mobo has troubles with a XEON X3460?
Last edited by KURTZ; 09-30-2009 at 03:20 AM.
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
hi sacha, i have just build up my system
M3F+860+2x2gb gskill 2000mhz
i'm testing 180x20=3600mhz with 1.9vcore
could you suggest me how to set other voltage like IMC PLL and PCH ?
is PCH = SB ? IMC = memory controller ?
which of them is more relevant for stability ? i'm coming from 775 and mi ideas are not so clear tnx
Great mobo !
Last edited by edo; 10-03-2009 at 08:08 AM.
Maximus III Formula - i7 860 4Ghz - 4 GB Gskill Ripjaws 2Ghz - Powercolor 5850 1000/1250 VF3000A - XFI Titanium Fatality - WD3200AAKS RAID 0 - Maxtor 500 Gb - Wd 5000AAKS - Enermax 625W modu82+ - Case CM690 - CM TX3
Nice one Edo, I said you would love this M/B, looks like you have a nice setup there, I will get round to putting some basic settings up for users to see when I get some time but for now just reset everything back to stock or use ASUS own 3.6Gig overclock as this will be much safer for you at the moment.
By the way I hope you are not using 1.9Vcore on that CPU, as this is far too much, I would recommend for stock air cooling not going above 1.35v and 1.4v for good air cooling.
I don't think this architecture has _ever_ been able to even POST 1.9vcore, much less load OS and run it.
[SIGPIC][/SIGPIC]
[PURE] AWESOME
@sasha: is the BIOS chip removable?
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
ups sorry :d i missed a one : i meant 1.19
anyway this is my first result
180x20=3600
Load line enabled
PLL 1.85500 (i think i could decrease)
IMC 1.200575 ( i think i could decrease)
PCH 1.04675
DRAM 1.64300
CPU 1.2 ( i think i could decrease)
http://img180.imageshack.us/img180/8002/3600.jpg
Last edited by edo; 10-04-2009 at 02:47 PM.
Maximus III Formula - i7 860 4Ghz - 4 GB Gskill Ripjaws 2Ghz - Powercolor 5850 1000/1250 VF3000A - XFI Titanium Fatality - WD3200AAKS RAID 0 - Maxtor 500 Gb - Wd 5000AAKS - Enermax 625W modu82+ - Case CM690 - CM TX3
I am still on the fence here, not sure of which one to get for gaming only, the RE2 or the MF3......
Read many posts here on the comparison on the i7 against the i5 and still not sure if the i5 is a good choice.
Anyone here that has move from the i7 to the i5? Would love to here your thoughts.
Looking good there, just keep an eye on the temps, if they go any higher get a better heatsink, also you don't want to be running prime to long as its only wasting time and degrading the CPU as it is fully loaded all the time.
There are two options for you as you say, for gaming there is not that much difference between the REII and MF3, the REII will be the better bet but is more expensive and then you have the CPU which again is more expensive, an i5 750 would be good enough with a slight overclock on it for gamming but I don't think you would need the MF3 for this, see my Review of the P7P55D Deluxe with all tests shown with core i5 750 running at 4000MHz
http://www.xtremesystems.org/forums/...d.php?t=233975
Heya Sacha love your reviews, what's the difference to 55D Deluxe?
What is RE2? MF3 is Maximus Formula 3 right?
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Many thanks for explanation. If I ever move to i5, now i know my choice is going to be P7P55D Deluxe cause it has everything I would need, overally great mobo.
What's the price for MF3 compared to 55D Deluxe?
Hm not much difference, 10 to 15€....
Last edited by TEDY; 10-04-2009 at 11:26 PM.
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Thanks for the reply Sacha,
One last question before I decide which one.
I have 2 PCIe 2.0 x1 cards that I wish to use, but on this board if I use the first PCIe 2.0 x16 with my video card, it looks like it will bock one of the PCIe 2.0 x1 slots.
So my question would be: Is it possible to use the second PCIe 2.0 x16 slot instead of the first one for the video card with no problems?
If so, then it looks like I will go with the MF3.
Last edited by dctokyo; 10-05-2009 at 06:32 AM.
Thanks for your replies sacha, but I think I have ask my question wrong to you.
The first PCIEx16 slot would be free, so Is it possible to have GPU in the second PCIEx16 slot with full functionality and speed? So I would only be using 1 of the PCIEx16 slot`s but just wish to know if using the second slot and not the first one will the card have full functionality and full speed?
Last edited by dctokyo; 10-05-2009 at 11:41 PM.
I am not 100% sure on this, but each PCI-e slot is a x16 slot so would think it would stand as stated in the spec if one card is used/slot then you will have x16 if two cards are used then it goes down to x8 for the second slot used and if three cards are used the third slot is x4.
I can only think this would stay the same regardless of which slot is used, but you would want to use the first PCI-E slot anyway because this is the nearest slot so will be much better and faster than slots that are further away
Bookmarks