It's how the internet runs. Tubes, a series of Tubes!
It's how the internet runs. Tubes, a series of Tubes!
Intel Q9550 l eVGA NForce 780i SLI FTW l 2 Palit GTX 560 Ti 2 gig cards in SLI l Corsair Dominator 8 gig PC2-8500 l 2 - Intel X-25M 80 gb SSD Raid 0 l WD 2 x 1 TB l On board sound l Antec TruePower Quattro TPQ-1000 1000W l Windows 7 Ultimate Edition 64 bit l 2 X Dell E248WFP 24" Monitors
Hi guys. Nothing compared to the awesomeness that can be found in here but there ya go
Mini-review: Q6600 vs i5 2500K. Gpu scaling on games.Originally Posted by NKrader
im sure bill gates has always wanted OLED Toilet Paperwipe his butt with steve jobs talking about ipad..
the fluid is tfc's..imo the purple kinda jive with the black fitting i guess, was thinking of going either purple or orange...
$$$ wise...hmmm dont have the faintest idea ... them tubes are Bitspower's sli/cf acrylic connectors actually, so almost no normal tubes here, so i guess practically 98% fittings....appreciate y'al comments,...wasnt too sure of posting here, blinded by the awesomeness of y'al rigs..
bro how that block orientation working out fer'ya ? i always thought the "supreme" should be at the bottom ...Hi guys. Nothing compared to the awesomeness that can be found in here but there ya go
thanks bro...
Well that explains alot lol. So basically you hard piped the whole loop. Well done
@Vlad'sAPE
Awesome! BP Madness O_____o
...btw do anyone know from where i can get (in europe) a LGA1366 Bracket for my Zalman ZM-WB5 block?
Corsair Obsidian 650D - EVGA P67 FTW - Samsung F3 1Tb - 8Gb A-Data cheapest crap DDR3 - Intel Core i5 2500K w/ Corsair H50 - EVGA GTX 295 co-op - Corsair AX650
Not bad...I think. The cpu stays at below 60ºC while running Linx at 3.6ghz 1.51V with a dual rad, so I think its doing fine...
Mini-review: Q6600 vs i5 2500K. Gpu scaling on games.im sure bill gates has always wanted OLED Toilet Paper
@Vlad'sAPE
Love it, Please oh please make a build log, or tell me you already have one
heres my spaghetti factory:
koolance 720 rad/res/twin pump on top, black ice 80.2 rad on the back, koolance cpu block, koolance 8800GTX block, danger den 8800GTX block.
Last edited by ATMA-WEAPON; 04-13-2010 at 12:32 PM.
workstation rig
Board: ASRock x399 Taichi
Proc: AMD Ryzen ThreadRipper 1950x @ 4.05GHz
Ram: 32GB G.Skill RipJaws DDR4-3600 @ 3200MHz (4x8GB)
Vid: Nvidia GTX 1080 Founders Edition
PSU: Silverstone Strider-P 1000w
HDD/SSD: 960 Evo 500GB, Optane 900p 280GB U.2, 256GB M4, 600GB Vraptor, 4TB barracuda
Cooling: koolance 280 rad, 240 rad, DDC pumps x2, full cover CPU and GPU blocks.
Case: Corsair Vengeance C70 OD-Green
Gaming rig
Board: Asus ROG Maximus XI Hero (WiFi)
Proc: Intel Core i9-9900KF @ 5.0GHz all cores
RAM: 32GB G.Skill Trident Z Royal Silver DDR4-3600 (2x16GB)
Vid: Nvidia RTX 2080 TI Founders Edition @ 2100MHz GPU 7000MHz mem
PSU: EVGA SuperNova 1000G+
SSD: 2x Samsung 970 EVO Plus 500GB M.2
Cooling: Hardware Labs Blackice Nemesis L-Series Xtreme 480x54 rad, 360x54 rad, XSPC D5 pump/res, EKWB mono block and full cover GPU block, all fans in silent mode.
Case: Lian Li PC-V3000
Vlad'sAPE that's an AWESOME build!
AMD FX 8350 @ 4.4Ghz
Corsair H60
Gigabyte GA-990FXA-UD3 AM3+
8GB Mushkin Blackline @ 1800Mhz
Sapphire Radeon HD 7950 3GB
Crucial C300 SSD - Bootdrive
2 x 640GB Samsung - 1.2TB RAID 0
800GB Western Digital Green SATAII
Corsair TX 750
Coolermaster HAF932 - Modded by Blackstare
Nice plumbing work
Could you please take a picture of your rig from above? I was to see plumbing from the top so I could have an idea for my worklog
I wish you had a worklog in XS
Last edited by shazza; 04-13-2010 at 07:33 PM. Reason: quoted images removed
How is the flow with all the 90's?
the build is not quite finish....will take more updated pict soonest once its complete..actually latest, had to swap the sr1 with 2 x 120 tfc's as the sr1 was sucking hot air from the 2nd 59..as for the flow rate, i got 2 koolance flow meter, one for each loop, wasnt too sure on the reading accuracy though, so mainly use it for monitoring and system benchmark. i'd hooked up the meters to the zalman's fan controller and the meter convert the readin from rmp to mLpm...right now, the 1st loop (cpu + D5 + quad rad) is showing around 37++mLpm, and the 2nd loop (mobo + vgas + ddc3.25 + ddc3.25 + 360rad + 120rad + 120rad) is showing around 37++mLpm when one pump off, and around 46++mLpm when 2 pumps are on. havent quite finish bleeding, so the readings might change a bit later on...for the 2nd loop, i only turn both pumps on when benching, and only one pump during normal gaming session..i also have 4 temp sensor that hookep up with the zalman's, 1 for each loop, 1 for inner case ammbience and 1 for the outside case...thats why i'm putting the zalman's iin the case literally, so easy mnitoring through the case window...
I built my computer and water cooled it. I just ordered the new Intel 980X EE CPU and a new board.
EDIT: for the rest of the photos, see this thread
Last edited by shazza; 04-14-2010 at 06:04 AM. Reason: 4 Image Limit
added a GTX 260 for physX
@Prava
Looks great man, what is the rear exhaust fan? I need something like that. Would you say the blades are bright white color or more grayish? I bought a Gelid Silent-12 (white blades) but not impressed with it's looks or build quality (plastic feels flimsy).
4 pics per post?
Last edited by Ogge_swe; 04-13-2010 at 11:37 PM.
4 pics per post... Someone doesn't read the rules.
Is it so hard to read the first post? I think not.
i5 760@H50||Cors XMS3 4GB||Holy Moly GA H55N-USB3||7900GT||WD green 1TB||Seasonic X650||
Latest burned HW: Biostar Tpowah I45, asus p5k, gskill 4gbpq, silverstone strider 600W...
Vad, your plumbing rig looks awesome! With all those 90º and blocks, i was wondering how many pumps do you have
This is gonna be way more fun than my wifes tits.
@prava can you give more pic. And tell the components of water cooling.
Gigabyte GA-MA790FX-UD5P AMD Athlon2 250 @3915 2x2GB G.SKILL @900 AMD Radeon 4870 Seagate Barracuda 320GB CM 690Advanced Chiftec Smart Power 500W Creative X-Fi Extreme Gigabyte S7500 EK Supreme XSPC RS240 Phobya DC12-400 Phobya
EDIT: Nice photos, supercopa, but please remember the case gallery is for completed systems only, and not multiple shots posted at different times of the same build. You may want to post these most recent shots in the Parts Gallery - or perhaps start a worklog to show all your photos. Thanks, shazza
Last edited by shazza; 04-14-2010 at 06:05 AM.
[SIGPIC]http://www.xtremesystems.org/forums/image.php?type=sigpic&userid=118583&dateline=12691 19007[/SIGPIC]
Awsome pictures dude. How you get your tubes so clear? Mine are all cloudy, not used or anything.
Project Echo | Fractal-Design Array Rev2 | i5 750 | DFI LANPARTY MI P55-T36 | 2x2GB A-Data | Fractal SFF 300w MDPC-X sleeved orange and black | HD5870 | Kingston V-Series 64GB SSD | 2TB HDD | EK Supreme HF | EK-DCP 4.0 | EK Multioption 250 RES | EK-CoolStream-RAD XT 240 | EK-CoolStream-RAD XT 120 | EK-PSC Fitting 12mm - G1/4 Black | 5870 fullcover block |
Theory | By Hannes ~ A Lian Li sculpture | Lian Li PC-8NB | AMD Phenom II x6 1090T BE | Asus Crosshair IV Formula | Cooler Master V8 | 2x Laing D5 + Bitspower TOP + MOD-kit | Bitspower 250 + 150 RES | EK-CoolStream-RAD XT 240 | 19mm 1/4G Bitspower Shiny Silver + Matte black Fittings, rotaries, fillports, plugs etc etc. | MDPC-X Color -X, Black and White Sleeve.
Sponsors: Lian Li, ASUS, Bitspower, Cooler Master, EkWaterblocks, Misco.se, Fractal-Design, PCB Distribution AB, Coolingstuff.se, Enermax.
I discovered the hard way that my Thermochill PA120.3 doesn't use G1/4 threads when I put in my compression fittings.
Also, I'm tempted to get a GPU block for my 5870.
Though I'll probably get a new board first. This one isn't that great (M4A79XTD Evo)
Last edited by Apokalipse; 04-14-2010 at 06:25 AM.
Apokalipse: why not turn pump 90deg in horizontal plane so that it's pointing to cpu block? One 90deg fitting less ..
Also switch rad inlet/outlet and put stright or 45deg rotary for 2nd tube of cpu wb to get rid of last 90deg. Though of course, there is no actual need in such low restriction loop with high flow pump for even more flow .. just my bad habbits to improve things to ideal
Reply With Quote
Bookmarks