Page 221 of 231 FirstFirst ... 121171211218219220221222223224 ... LastLast
Results 5,501 to 5,525 of 5770

Thread: Liquid Cooling Case Gallery

  1. #5501
    Registered User
    Join Date
    Aug 2010
    Posts
    2
    My new build:











    Cooler Master HAF XM
    Corsair HX850
    ASUS SABERTOOTH Z77
    I7 3770K
    GTX 680
    4 x G.SKILL F3-2400C10Q
    SSD OCZ Vertex 3 120 GB
    2 x 3TB + 3 x 2TB
    EK-CoolStream RAD XT 360
    EK-FC680 GTX + EK GeForce 680 GTX VGA Liquid Cooling RAM Backplate
    Swiftech APOGEE HD
    Swiftech MCP 350
    XSPC Reservoir Laing DDC
    3 x Scythe Gentle Typhoon 1850RPM
    Last edited by shazza; 10-02-2012 at 05:41 AM. Reason: 4 image limit

  2. #5502
    Registered User
    Join Date
    Jun 2011
    Location
    Barcelona, Spain!! VISCA EL BARÇA!!
    Posts
    71

    Four Simple Rules:
    1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
    2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
    3) Do not quote images,
    4) Finished cases only, no worklogs.

    Optionally, it would be nice if you could list your water cooling components.
    It seems that some have not read the rules
    ***TJ11 WC MoD 2.0***
    SilverStone TJ11 / Enermax PlatimaX 1500W / Corei7 980X@ 4.6Ghz HT On /Asus Rampage 3 Extreme / Corsair Dominator GT 12GB 2000Mhz 9-10-9-27 / Asus Geforce 580 GTX TRI-SLI / Creative SB. XFI Titanium Fatality C.S.
    AQUACOMPUTER CUPLEX KRYOS HF / EK FB RE3 - EK RES 250 ADVANCED - EK DUAL TOP / MIPS RAM COOLER 7 NICKEL POM / AQUACOMPUTER AQUAGRAFX NICKEL 580 x3 / BITSPOWER BLACK MATT FITTINGS
    LAING D5 VARIO x2 / HW BLACK ICE SR1 480 - 360 - 240 / HW BLACK ICE GTX EXTREME 120 / NIDEC GT 1850 / PARACORDS SLEEVING / TYGON 19-13 / LAMPTRON TOUCH
    ONKYO A-9050 // BOWERS & WILKINS 686 // QED XTC // HRL BANANAS & HRL OPTICAL // AKG Q701 // MATRIX M-STAGE AMP. // AUDIOQUEST EVERGREEN 2RCA

  3. #5503
    Ω
    Join Date
    Jun 2009
    Location
    Brooklyn, NY
    Posts
    788
    I'll put my hat in the ring.

    ravensideviewwindow.jpg

    ravensidealchemy.jpg

    ravensideopenalchemy.jpg

    ravencomplete9.jpg


    Caselabs M8 with extended top
    EK Supreme Full Cu nickel plated CPU block
    XSPC Razor 680 GTX full cover blocks with EVGA 680 GTX back plates
    (2) Koolance PMP-400 pumps
    (2) Koolance DDC pump tops
    (2) Koolance DDC Heat sinks
    (2) EK Multioption 150 Advanced Reservoir
    Koolance HX-CU1020V 360mm Radiator
    EK CoolStream XT 360mm Radiator
    Phobya G-Changer 360mm Radiator
    Aqua Computers Aquaero XT 5
    (2) Aqua Computers PowerAdjust 2
    Aqua Computers in-line temperature fitting
    Aqua Computers flow meter
    (20) Enzotech G1/4 (3/8" ID x 1/2 OD") compression fittings
    (2) Koolance VL3 3/8" ID QDC fittings - New addition
    Various BitsPower and Koolance fittings
    15 Ft. Tygon Neoprene 3/8" ID tubing
    (16) Xigmatek Orange blade/White LED 120mm fans
    Last edited by ohms; 10-01-2012 at 05:22 PM.
    Ω Raven Build Blog

    "The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." - Thomas Jefferson
    " Inter Arma Enim Silent Leges" - In times of war, the law falls silent.

  4. #5504
    bongholio
    Guest
    431143_10151050230436985_1067654873_n.jpg

    399562_10150948509316985_1196261286_n.jpg

    644019_10151086054351985_1015810310_n.jpg

    EVGA Classified SR-2 + 2x Intel Xeon X5680
    Corsair Dominator GT 2000MHz CL7 6G x2
    Caselabs Magnum STH10, 2x EVGA GTX680 Classified 4GB
    1x Intel 520 480GB (OS), 3x OCZ Vertex 2 120G Raid0, 1x OCZ Vertex 3 120G
    EVGA SuperNova NEX 1500
    2x Bitspower Summit CPU blocks, 1 BlackFreezer SR-2 block, 2x DIMM6 Dominator blocks
    1x Black Ice® SR1 480,1x Black Ice® SR1 360 plus 7x Scythe Gentle Typhoon 1850rpm
    2x MCP 655 plus Bitspower Dual D5 Mod Top plus EK 250 Advance Res
    2x EVGA GTX680 Hydro Copper Waterblocks with Backplate
    1x Black Ice® SR1 480, 4x Scythe Gentle Typhoon 1850rpm, MCP355, XSPC Res Top
    Bitspower matte black compression fittings, Tygon Clear tubings
    Last edited by bongholio; 10-04-2012 at 02:53 AM.

  5. #5505
    bongholio
    Guest
    previous build using LittleDevil LD PC-V8...

    312251_10150339724386985_297547943_n.jpg

  6. #5506
    Xtreme Member
    Join Date
    Jan 2011
    Location
    Orelia
    Posts
    316
    A teaser of things to come...


    Add me on Facebook
    -=<#*!! 5OUnD PHr33K !!*#>=-

  7. #5507
    Registered User
    Join Date
    Aug 2010
    Location
    Brazil
    Posts
    17
    New MB 6 SSDS Raid 0








  8. #5508
    Registered User
    Join Date
    Jun 2011
    Location
    Barcelona, Spain!! VISCA EL BARÇA!!
    Posts
    71






    Last edited by MR. YAKUZA; 11-11-2012 at 03:26 PM.
    ***TJ11 WC MoD 2.0***
    SilverStone TJ11 / Enermax PlatimaX 1500W / Corei7 980X@ 4.6Ghz HT On /Asus Rampage 3 Extreme / Corsair Dominator GT 12GB 2000Mhz 9-10-9-27 / Asus Geforce 580 GTX TRI-SLI / Creative SB. XFI Titanium Fatality C.S.
    AQUACOMPUTER CUPLEX KRYOS HF / EK FB RE3 - EK RES 250 ADVANCED - EK DUAL TOP / MIPS RAM COOLER 7 NICKEL POM / AQUACOMPUTER AQUAGRAFX NICKEL 580 x3 / BITSPOWER BLACK MATT FITTINGS
    LAING D5 VARIO x2 / HW BLACK ICE SR1 480 - 360 - 240 / HW BLACK ICE GTX EXTREME 120 / NIDEC GT 1850 / PARACORDS SLEEVING / TYGON 19-13 / LAMPTRON TOUCH
    ONKYO A-9050 // BOWERS & WILKINS 686 // QED XTC // HRL BANANAS & HRL OPTICAL // AKG Q701 // MATRIX M-STAGE AMP. // AUDIOQUEST EVERGREEN 2RCA

  9. #5509
    Registered User
    Join Date
    Nov 2009
    Location
    Budapest, Hungary
    Posts
    12
    Hello Guys,
    my last watercooled HTPC build
    video: http://www.youtube.com/watch?v=2XcMpd_Pp_k

    pic01.jpg

    pic02.jpg

    pic03.jpg

    pic04.jpg

    Only the motherboard changed because the previous one was died, but I reorganized the water components.

    PC CONFIG:
    PSU: Corsair CMPSU-750AX Modular
    MB: MSI Z77A-GD65 S115x
    CPU: Intel Core i7-2600K 3.4GHz @4.1GHz
    VGA: GIGABYTE ATI-AMD HD6970 GV-R697D5-2GD-B 2GB GDDR5 PCIE
    RAM: Apacer 4096MB 2000MHz CL9 DDR3 ARES KIT
    SSD: OCZ RevoDrive PCI-Express SSD 50GB
    HDD: 2x Samsung 500Gb 3,5" HDD Raid0
    SOUND: ASUS Xonar D2X PCIE
    BLU-RAY DRIVE: Pioneer BDR-205
    CASE: Thermaltake DH104 HTPC case

    WATER-COOLING components:
    PUMP: Laing D5 Solar
    CPU: Koolance cpu-340 with socket 1155 mounting
    VGA: EK Water Blocks EK-FC6970 full cover
    HDD: Watercool Silentstar Dual Box
    TUBING: Tygon 3603 19/13
    RAD: Watercool MORA2 PRO
    RESERVOIR: Koolance 120mm
    FANs: 2x Scythe Gentle Typhoon 120 mm for CASE (blowing inwards on reduced RPM) and 1x Scythe S-FLEX SFF21D (800rpm/8.7dBA) for the PSU (reserve airflow blowing inwards).
    Fittings: Monsoon Free Center Compression - Chrome, Bitspower Shining Silver Rotary 90°

    system gross weight: about 30kg

    ....absolutely quiet of course.

    Have a nice day!

  10. #5510
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    Nice, what are your temps (and ambients) ?

  11. #5511
    Registered User
    Join Date
    Nov 2009
    Location
    Budapest, Hungary
    Posts
    12
    Thanks!
    The temps of this system highly depends on the environmental temperature and the RPMs of the 3 fan. I can set the RPMs manually with the knob on the back side.
    In summer, when the outside temp was about 28 celsius than the load (gaming) temp was the following: CPU about 45-50 celsius GPU about 53-58 celsius. Without any tuning and the funs were on lowest RPM.
    The minimal temps in idle mode and with 23 celsius outside temp are about 35-38 cesius by the CPU and GPU also (Funs on lowest RPM).
    So, there is no problem with the temps at all. It is very good and stable system.

    Sorry for my english.

    Quote Originally Posted by felix_w View Post
    Nice, what are your temps (and ambients) ?

  12. #5512
    Xtreme Member
    Join Date
    Jul 2009
    Location
    italy
    Posts
    379
    5D II |14 2.8 |Σ 35 1.4|
    Flickr
    You Dont Need Telescope

  13. #5513
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Ottawa, Canada
    Posts
    2,443
    Just built this on Saturday using some of MagisD's old stuff I bought. Sorry for the bad camera pics.





    @ VIPER.... Will do when I get home from work. The top can hold a 240 rad BUT you have to use a thin one if you want fans on it. The case is a very nice case though. Very clean and very tidy. Sorry for the bad pic but i have a crappy camera.

    DSC01790.JPG
    Last edited by Sadasius; 10-25-2012 at 02:22 PM.

  14. #5514
    Xtreme Member
    Join Date
    Nov 2003
    Location
    Bulgaria
    Posts
    406
    Quote Originally Posted by Sadasius View Post
    Just built this on Saturday using some of MagisD's old stuff I bought. Sorry for the bad camera pics.



    Can you post some more pics from the inside, because soon I'll buy the same case
    .:If It Isn't Broke, Overclock It!:. .:Overclock It Til It Bleeds!:. .:If you can read this, then you aren't "well" Overclocked yet...!!! :.

  15. #5515
    Registered User
    Join Date
    Oct 2006
    Location
    The Netherlands
    Posts
    51
    Quote Originally Posted by sanbase View Post
    My new build:

    Cooler Master HAF XM
    Corsair HX850
    ASUS SABERTOOTH Z77
    I7 3770K
    GTX 680
    4 x G.SKILL F3-2400C10Q
    SSD OCZ Vertex 3 120 GB
    2 x 3TB + 3 x 2TB
    EK-CoolStream RAD XT 360
    EK-FC680 GTX + EK GeForce 680 GTX VGA Liquid Cooling RAM Backplate
    Swiftech APOGEE HD
    Swiftech MCP 350
    XSPC Reservoir Laing DDC
    3 x Scythe Gentle Typhoon 1850RPM
    It could be nice to use a 45 degree from GPU to pump ?
    Specs: Intel Core i7 950 @ 4.2GHz with EK Supreme waterblock. Sapphire HD7970 @ 1125/1575 with EK waterblock. ASUS Sabertooth X58. 3x 2GB OCZ Reaper @ 1600MHz. 128GB Crucial M4. 2x 2TB WD Green. Corsair AX750. XSPC RX480 Radiator. Laing DCC-1T pump. 4x Scythe Gentle Typhoon 120mm @ 6 volt. 4x Sharkoon Silent Eagle 80mm @ 6 volt. Modified Lian-Li PC-71.

  16. #5516
    Registered User
    Join Date
    Nov 2009
    Location
    Budapest, Hungary
    Posts
    12
    Temps after 1 day IDLE work:
    -ambient temp: 22 celsius
    -fans on lowest RPM
    Aida_Temp_IDLE.png

    Edit2:
    Temps after 3 hours of Gaming (Medal of Honor Warfighter)
    -ambient temp: 22 celsius
    -fans on lowest RPM
    Aida_Temp_2hours_gaming.png

    I'm very satisfied again.
    Let me know if you have questions.

    Quote Originally Posted by Logaan View Post
    Thanks!
    The temps of this system highly depends on the environmental temperature and the RPMs of the 3 fan. I can set the RPMs manually with the knob on the back side.
    In summer, when the outside temp was about 28 celsius than the load (gaming) temp was the following: CPU about 45-50 celsius GPU about 53-58 celsius. Without any tuning and the fans were on lowest RPM.
    The minimal temps in idle mode and with 23 celsius outside temp are about 35-38 cesius by the CPU and GPU also (fans on lowest RPM).
    So, there is no problem with the temps at all. It is very good and stable system.

    Sorry for my english.
    Last edited by Logaan; 10-29-2012 at 08:58 AM. Reason: measuring temps

  17. #5517
    Registered User
    Join Date
    May 2007
    Location
    Nashville, TN
    Posts
    97



  18. #5518
    Xtreme Member
    Join Date
    Nov 2010
    Posts
    140
    Parallel.
    Total parallel








  19. #5519
    I am Xtreme
    Join Date
    Oct 2005
    Location
    Grande Prairie, AB, CAN
    Posts
    6,127
    Quote Originally Posted by Elder View Post
    Parallel.
    Total parallel
    Clean.

  20. #5520
    Registered User
    Join Date
    Nov 2009
    Location
    Budapest, Hungary
    Posts
    12
    Hi Elder,
    Nice.
    But, I don't understand the logic of the flowing. Sorry.
    Can the cooling liquid go through the VGA blocks on this way?

    Quote Originally Posted by Elder View Post
    Parallel.
    Total parallel

  21. #5521
    Registered User
    Join Date
    Apr 2010
    Location
    Stoke-on-Trent
    Posts
    66
    Quote Originally Posted by Elder View Post
    Parallel.
    Total parallel
    I, too, have gone total parallel with my build recently and seem to be getting a few tiny air bubbles trapped around the cpu inlet. Any tips on bleeding them out other than tapping the tubes?

  22. #5522
    Xtreme Member
    Join Date
    Nov 2010
    Location
    Brazil
    Posts
    161
    Ive tought about all parallel before, but never seen anybody doing it. How are your temperatures? Can you give details on your loop?
    PC:
    MOBO: Maximus VI Extreme
    CPU: Core i7-4770k
    RAM: 2x4gb Dominator Platinum 2133
    GPU: GeForce GTX Titan

    Greetings from Brazil!

  23. #5523
    Xtreme Member
    Join Date
    Nov 2010
    Posts
    140



    I understand that there are many questions about this solution.
    I'm not a theorist, I want to try it in practice
    and prepared to do so properly.
    Someone had to finally take practice tests ... to find answers.

    Work in progress, I decided to use a very strong pumps.
    Koolance 450 Strong x2
    Iwaki RD-30
    Swiftech 35X turbo

    After testing will present the results.

  24. #5524
    Registered User
    Join Date
    Jan 2011
    Location
    Bangkok Thailand
    Posts
    23
    Prodigy from thai


  25. #5525
    Xtreme Member
    Join Date
    Nov 2010
    Location
    Brazil
    Posts
    161
    @Elder: looks like it's a very non-restrictive loop. Higher flow pumps should get the best results
    PC:
    MOBO: Maximus VI Extreme
    CPU: Core i7-4770k
    RAM: 2x4gb Dominator Platinum 2133
    GPU: GeForce GTX Titan

    Greetings from Brazil!

Page 221 of 231 FirstFirst ... 121171211218219220221222223224 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •